Faculty of Science and Technology

Research output

Research output per year 1975 2021

• 12458 Article
• 6323 Conference contribution
• 979 Conference article
• 910 Paper
• 763 More
  • 220 Chapter
  • 219 Review article
  • 197 Editorial
  • 81 Comment/debate
  • 23 Letter
  • 16 Short survey
  • 6 Book
  • 1 Foreword/postscript

Research output per year

Research output per year

Search results

• 2020

  Annual Nationwide Environmental Impact Assessment of Japanese Municipalities by Type of Business within the Endpoint-type LCIA Method "lIME2"

  Yamasaki, J., Ikaga, T. & Itsubo, N., 2020 Jan 24, In: IOP Conference Series: Earth and Environmental Science. 410, 1, 012067.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • type of business
  • environmental impact assessment
  • assessment method
  • impact assessment
  • municipality

• Basic studies of 3-inch PMT for multi-PMT development

  Hyper-Kamiokande Proto-Collaboration, 2020 Mar 20, In: Journal of Physics: Conference Series. 1468, 1, 012162.

  Research output: Contribution to journal › Conference article › peer-review

  • neutrino beams
  • water
  • detectors
  • marking
  • magnetic fields

• Development and performance of the 20" PMT for Hyper-Kamiokande

  Bronner, C., Nishimura, Y., Xia, J. & Tashiro, T., 2020 Mar 20, In: Journal of Physics: Conference Series. 1468, 1, 012237.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • photomultiplier tubes
  • performance
  • night vision
  • detectors
  • photonics

• Electroreduction of carbon dioxide using platinum-iridium modified boron-doped diamond (BDD) with various platinum-iridium ratios

  Saprudin, M. H., Atriardi, S. R., Gunlazuardi, J., Einaga, Y. & Ivandini, T. A., 2020 Apr 28, In: IOP Conference Series: Materials Science and Engineering. 763, 1, 012051.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Iridium
  • Boron
  • Diamond
  • Platinum
  • Carbon Dioxide
  1 Citation (Scopus)

• Estimation of the health effects and economic benefits of an improved residential environment

  Kamata, T., Kawakubo, S., Murakami, S., Ikaga, T. & Nozawa, S., 2020 Nov 20, In: IOP Conference Series: Earth and Environmental Science. 588, 3, 032082.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • health
  • economics
  • household
  • effect
  • thermal insulation

• Evaluation of position dependent performance of 3-inch PMTs for Multi-PMT development

  Hyper-Kamiokande Proto-Collaboration, 2020 Mar 20, In: Journal of Physics: Conference Series. 1468, 1, 012163.

  Research output: Contribution to journal › Conference article › peer-review

  • photocathodes
  • evaluation
  • detectors
  • performance
  • Japan

• Fast soft color segmentation

  Akimoto, N., Zhu, H., Jin, Y. & Aoki, Y., 2020, In: Proceedings of the IEEE Computer Society Conference on Computer Vision and Pattern Recognition. p. 8274-8283 10 p., 9156635.

  Research output: Contribution to journal › Conference article › peer-review

  • Color
  • Decomposition
  • Neural networks

• Heartbeat Detection Technology for Monitoring Driver's Physical Condition

  Tsuchiya, K., Mochizuki, K., Ohtsuki, T. & Yamamoto, K., 2020 Apr 14, In: SAE Technical Papers. 2020-April, April

  Research output: Contribution to journal › Conference article › peer-review

  • Highway accidents
  • Doppler radar
  • Microwaves
  • Monitoring
  • Power spectrum

• Investigations on europium aluminum incorporated polymer composite optical waveguide amplifier

  Najahatul Huda Saris, N., Hamzah, A., Sabri, S., Ambran, S., Mikami, O. & Ishigure, T., 2020 Jun 17, In: Journal of Physics: Conference Series. 1502, 1, 012014.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • europium
  • optical waveguides
  • amplifiers
  • aluminum
  • composite materials

• Material testing of magnesium alloy AZ31B using a finite element polycrystal method based on a rate independent crystal plasticity model

  Vago, G. & Oya, T., 2020 Nov 17, In: IOP Conference Series: Materials Science and Engineering. 967, 1, 012057.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • AZ31B alloy
  • Polycrystals
  • Materials testing
  • Magnesium alloys
  • Crystals

• Non-Blind Image Deconvolution Based on “Ringing” Removal Using Convolutional Neural Network

  Kudo, T., Fujisawa, T., Yamaguchi, T. & Ikehara, M., 2020 Jan 26, In: IS and T International Symposium on Electronic Imaging Science and Technology. 2020, 10

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Deconvolution
  • Neural networks
  • Network architecture
  • borders
  • education

• Preparation of boron-doped diamond modified by bimetal nickel and zinc

  Putri, Y. M. T. A., Jiwanti, P. K., Irkham, Gunlazuardi, J., Einaga, Y. & Ivandini, T. A., 2020, In: IOP Conference Series: Materials Science and Engineering. 902, 1, 012001.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Bimetals
  • Boron
  • Diamond
  • Nickel
  • Zinc

• Role of size of rubber particles on failure mode and impact resistance characteristics of pc/abs blends and their abs constituents with a higher rubber content

  M. Nizar, M., Masaki, O., Hirotsugu, I. & Kikuo, K., 2020, In: Defect and Diffusion Forum. 402 DDF, p. 1-6 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Acrylonitrile
  • 1,3-butadiene
  • Styrene
  • impact resistance
  • acrylonitriles

• Simulation method on three-dimensional shape generation process by femtosecond laser ablation

  Kawakami, H., Nabetani, S., Ueda, M., Ogawa, Y., Yamazaki, K. & Aoyama, H., 2020, In: Procedia CIRP. 95, p. 921-926 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Femtosecond lasers
  • Laser ablation
  • Computer aided manufacturing
  • Laser beam effects
  • Ablation

• Study of carbon dioxide electrochemical reduction in flow cell system using copper modified boron-doped diamond

  Zahran Ilyasa, S., Krisma Jiwanti, P., Khalil, M., Einaga, Y. & Anggraningrum Ivandini, T., 2020 Nov 25, In: E3S Web of Conferences. 211, 03011.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Boron
  • boron
  • Diamonds
  • diamond
  • Carbon dioxide

• Study of Forming Efficiency by Real-time Correction of Head Nozzle Height in Directed Energy Deposition

  Aizawa, K., Ueda, M., Aoyama, H. & Yamazaki, K., 2020 Jul 30, In: IOP Conference Series: Materials Science and Engineering. 894, 1, 012012.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Molding
  • Nozzles
  • Metals
  • Powder metals
  • Molten materials

• Study of nitrate contaminants removal from groundwater on copper modified BDD electrode

  Kuang, P., Cui, Y., Feng, C. & Einaga, Y., 2020 Oct 15, In: E3S Web of Conferences. 194, 04024.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Nitrates
  • Groundwater
  • Boron
  • boron
  • Diamonds

• Work-hardening behavior prediction model of arbitrary reloading process based on material crystallographic structure

  Oya, T., Yanagimoto, J., Ito, K., Uemura, G. & Mori, N., 2020 Nov 17, In: IOP Conference Series: Materials Science and Engineering. 967, 1, 012062.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Strain hardening
  • Hardening
  • Polycrystals
  • Composite materials
• 2019

  A Cycle-to-Cycle Variation Extraction Method for Flow Field Analysis in SI IC Engines Based on Turbulence Scales

  Matsuda, M., Yokomori, T., Minamoto, Y., Shimura, M., Tanahashi, M. & Iida, N., 2019 Jan 15, In: SAE Technical Papers. 2019-January, January

  Research output: Contribution to journal › Conference article › peer-review

  • Electric sparks
  • Turbulence
  • Ignition
  • Flow fields
  • Internal combustion engines

• Disturbance response analysis of cell-to-cell communication systems based on spatial frequency decomposition

  Kotsuka, T. & Hori, Y., 2019, In: IFAC-PapersOnLine. 52, 26, p. 65-69 5 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Molecules
  • Communication systems
  • Decomposition
  • Telecommunication networks
  • Communication

• Enhancement of sensor-less cutting force estimation by tuning of observer parameters from cutting test

  Yamato, S., Imabeppu, Y., Irino, N., Suzuki, N. & Kakinuma, Y., 2019, In: Procedia Manufacturing. 41, p. 272-279 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Tuning
  • Sensors
  • Ball screws
  • Machine tools
  • Force measurement

• Experimental validation of agile attitude control with sinc function-based profiler for reducing residual vibrations

  Kamiya, T., Shimoda, K., Ozawa, Y., Yokota, K., Satoh, T. & Yamasaki, N., 2019, In: Proceedings of the International Astronautical Congress, IAC. 2019-October, IAC-19_C1_5_12_x49910.

  Research output: Contribution to journal › Conference article › peer-review

  • attitude control
  • profiler
  • Attitude control
  • Flexible spacecraft
  • control system

• How can CASBEE contribute as a sustainability assessment tool to achieve the SDGs?

  Miyazaki, G., Kawakubo, S., Murakami, S. & Ikaga, T., 2019 Aug 9, In: IOP Conference Series: Earth and Environmental Science. 294, 1, 012007.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Sustainable Development Goal
  • built environment
  • sustainability
  • city
  • sustainable development
  2 Citations (Scopus)

• Ignition Experiments by Nanosecond Repetitively Pulsed Discharges in Intense Turbulence for Super Lean Burn at Engine Condition

  Uesugi, K., Morii, Y., Mukoyama, T., Tezuka, T., Hasegawa, S., Nakamura, H., Takana, H., Maruta, K., Yokomori, T. & Iida, N., 2019 Dec 19, In: SAE Technical Papers. December

  Research output: Contribution to journal › Conference article › peer-review

  • Discharge (fluid mechanics)
  • Turbulence
  • Ignition
  • Engines
  • Experiments

• Improved regret bounds for bandit combinatorial optimization

  Ito, S., Hatano, D., Sumita, H., Takemura, K., Fukunaga, T., Kakimura, N. & Kawarabayashi, K. I., 2019, In: Advances in Neural Information Processing Systems. 32

  Research output: Contribution to journal › Conference article › peer-review

  • Combinatorial optimization
  • Random variables
  2 Citations (Scopus)

• Influence of ethanol blending on knocking in a lean burn SI engine

  Kaneko, K., Yasutake, Y., Yokomori, T. & Iida, N., 2019 Dec 19, In: SAE Technical Papers. December

  Research output: Contribution to journal › Conference article › peer-review

  • Ethanol
  • Internal combustion engines
  • Latent heat
  • Evaporation
  • Hot Temperature
  1 Citation (Scopus)

• Ontologies-based pupil robot interaction with group discussion

  Ono, H., Koike, K., Morita, T. & Yamaguchi, T., 2019 Jan 1, In: Procedia Computer Science. 159, p. 2071-2080 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Ontology
  • Robots
  • Education

• Optimal Trajectory Planning of Aircraft for Fair-Sharing of Noise

  Saito, Y., Yoshimura, S., Inoue, M., Takahashi, M. & Sugihara, Y., 2019, In: IFAC-PapersOnLine. 52, 8, p. 368-374 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Aircraft
  • Trajectories
  • Planning
  • Experiments

• Oracle-efficient algorithms for online linear optimization with bandit feedback

  Ito, S., Hatano, D., Sumita, H., Takemura, K., Fukunaga, T., Kakimura, N. & Kawarabayashi, K. I., 2019, In: Advances in Neural Information Processing Systems. 32

  Research output: Contribution to journal › Conference article › peer-review

  • Feedback
  • Computational efficiency
  • Polynomials
  1 Citation (Scopus)

• Research of Fuel Components to Expand lean-limit in Super lean-burn condition

  Naiki, T., Obata, K., Watanabe, M., Yokomori, T. & Iida, N., 2019 Dec 19, In: SAE Technical Papers. December

  Research output: Contribution to journal › Conference article › peer-review

  • Hot Temperature
  • Chemical analysis
  • Air
  • Internal combustion engines
  • Engines
  2 Citations (Scopus)

• Selectivity of Carbon Nanotubes under An Electric Field on Transferring Water - Alcohol Mixtures

  Winarto, Yamamoto, E. & Yasuoka, K., 2019 Mar 29, In: IOP Conference Series: Materials Science and Engineering. 494, 1, 012099.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Carbon Nanotubes
  • Alcohols
  • Carbon nanotubes
  • Electric fields
  • Water

• Semantic search engine for daily work reports integrating heterogeneous ontologies

  Suehiro, K., Masumura, K., Morita, T. & Yamaguchi, T., 2019 Jan 1, In: Procedia Computer Science. 159, p. 2061-2070 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Search engines
  • Ontology
  • Semantics
  • Industry
  • Pattern matching

• Solar parabolic trough thermal energy output forecasting based on K-Nearest Neighbors approach

  Jamaludin, J. & Ohmori, H., 2019 Oct 29, In: IOP Conference Series: Earth and Environmental Science. 342, 1, 012013.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • trough
  • forecasting
  • energy
  • irradiance
  • weather condition

• Stabilization of metal structure formation in directed energy deposition by applying a coolant system

  Koike, R., Pagano, L., Kakinuma, Y., Oda, Y. & Kondo, M., 2019, In: Procedia Manufacturing. 40, p. 38-44 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Coolants
  • Stabilization
  • Metals
  • Crystal structure
  • Cooling

• State feedback synthesis for discrete-time linear systems with stochastic parameters guaranteeing deterministic H₂ performance and stochastic stability

  Niwa, K., Hattaha, K., Sato, M. & Adachi, S., 2019 Sep, In: IFAC-PapersOnLine. 52, 16, p. 664-669 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • State feedback
  • Linear matrix inequalities
  • Linear systems
  • Normal distribution
  • Controllers

• The relationships between human capital, quality management and corporate social performance: A Bayesian SEM approach

  Iwamoto, H. & Suzuki, H., 2019, In: Procedia Manufacturing. 39, p. 695-701 7 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Quality management
  • Scanning electron microscopy
  • Industry
  • Sustainable development
  • Personnel
• 2018

  A basic study on metal foam fabrication with titanium hydride in direct energy deposition

  Koike, R., Matsumoto, T., Kakinuma, Y., Aoyama, T., Oda, Y., Kuriya, T. & Kondo, M., 2018, In: Procedia Manufacturing. 18, p. 68-73 6 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Metal foams
  • Hydrides
  • Titanium
  • Powders
  • Fabrication
  4 Citations (Scopus)

• Analyses of press formability of CFRP sheet considering the fiber kinking and the ductile behavior of resin

  Hayashi, T. & Oya, T., 2018 Aug 6, In: Journal of Physics: Conference Series. 1063, 1, 12184.

  Research output: Contribution to journal › Conference article › peer-review

  • kinking
  • carbon fiber reinforced plastics
  • resins
  • voids
  • fibers

• A refocus-interface for diminished reality work area visualization

  Maezawa, M., Mori, S. & Saito, H., 2018, In: IS and T International Symposium on Electronic Imaging Science and Technology. p. 1121-1124 4 p.

  Research output: Contribution to journal › Conference article › peer-review

  • cameras
  • Visualization
  • Cameras

• A study on skill acquisition mechanism and development of skill transfer systems

  Koike, H., Rekimoto, J., Ushiba, J., Furuya, S. & Ito, A., 2018 Jan 1, In: CEUR Workshop Proceedings. 2068

  Research output: Contribution to journal › Conference article › peer-review

  • Artificial intelligence
  • Computer vision
  • Robotics
  1 Citation (Scopus)

• Building up ontologies with property axioms from Wikipedia

  Kawakami, T., Morita, T. & Yamaguchi, T., 2018 Jan 1, In: CEUR Workshop Proceedings. 2293, p. 1-12 12 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Ontology
  1 Citation (Scopus)

• Closed-channel contribution in the BCS-BEC crossover regime of an ultracold Fermi gas with an orbital Feshbach resonance

  Mondal, S., Inotani, D. & Ohashi, Y., 2018 Apr 19, In: Journal of Physics: Conference Series. 969, 1, 012017.

  Research output: Contribution to journal › Conference article › peer-review

  • crossovers
  • occupation
  • gases
  • condensation
  • transition temperature
  3 Citations (Scopus)

• Continuous-time value function approximation in reproducing kernel hilbert spaces

  Ohnishi, M., Johansson, M., Yukawa, M. & Sugiyama, M., 2018, In: Advances in Neural Information Processing Systems. 2018-December, p. 2813-2824 12 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Hilbert spaces
  • Reinforcement learning
  • Adaptive filters
  • Dynamical systems
  • Uncertainty

• Determination of Combined Hardening Parameters to Simulate Deformation Behavior of C(T) Specimen under Cyclic Loading

  Ryu, H. W., Kim, H. T., Kim, Y. J. & Kim, J. W., 2018, In: Procedia Structural Integrity. 13, p. 1932-1939 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Hardening
  • Hysteresis loops
  • Stainless Steel
  • Stainless steel
  • Austenite
  1 Citation (Scopus)

• Development of an access method to menu ontology data through converting natural language into SparQL queries

  Murayama, Y., Kobayashi, I., Morita, T., Nakano, Y. & Yamaguchi, T., 2018, In: CEUR Workshop Proceedings. 2293, p. 13-20 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Natural language processing systems
  • Ontology
  • Robots
  • Experiments

• Dislocation-based crystal plasticity FE analysis for kink band formation in Mg-based LPSO phase considering higher-order stress

  Kimura, Y., Ueta, R. & Shizawa, K., 2018 Jan 1, In: Procedia Manufacturing. 15, p. 1825-1832 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Dislocations (crystals)
  • Crystals
  • Plasticity
  • Single crystals
  3 Citations (Scopus)

• Experimental and analytical investigations on a function for the non-associated flow rule model

  Oya, T., Yanagimoto, J., Ito, K., Uemura, G. & Mori, N., 2018, In: Procedia Manufacturing. 15, p. 1908-1915 8 p.

  Research output: Contribution to journal › Conference article › peer-review

  Open Access

  • Anisotropy
  • Bifurcation (mathematics)
  • Constitutive models
  • Plasticity

• Frequency response of a liquid sloshing in a rotating, laterally oscillating, cylindrical vessel

  Yokose, E., Saito, Y. & Sawada, T., 2018 Oct 10, In: MATEC Web of Conferences. 211, 15003.

  Research output: Contribution to journal › Conference article › peer-review

  • Liquid sloshing
  • Frequency response
  • Direction compound
  • Fluid dynamics
  • Fast Fourier transforms

• Impact-induced fracture mechanisms of immiscible PC/ABS (50/50) blends

  Machmud, M. N., Omiya, M., Inoue, H. & Kishimoto, K., 2018 Apr 6, In: IOP Conference Series: Materials Science and Engineering. 334, 1, 012078.

  Research output: Contribution to journal › Conference article › peer-review

  • Acrylonitrile
  • 1,3-butadiene
  • Styrene
  • polycarbonate
  • Polycarbonates
  2 Citations (Scopus)

• Implementing Multi-Robot Cafe by PRINTEPS with Service Quality Dimensions

  Morita, T., Kashiwagi, N., Yorozu, A., Suzuki, H. & Yamaguchi, T., 2018, In: Procedia Computer Science. 126, p. 1954-1963 10 p.

  Research output: Contribution to journal › Conference article › peer-review

  • Robots
  • Customer satisfaction
  • Quality of service
  1 Citation (Scopus)