Department of Mechanical Engineering

Filter
Conference contribution

Search results

  • 2009

    Needle-type in-situ plant water content sensors with polyethersulfone membrane

    Iwashita, T. & Miki, N., 2009 Dec 11, TRANSDUCERS 2009 - 15th International Conference on Solid-State Sensors, Actuators and Microsystems. p. 1849-1852 4 p. 5285706. (TRANSDUCERS 2009 - 15th International Conference on Solid-State Sensors, Actuators and Microsystems).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Numerical and experimental investigation on detonation tube for simulating the rocket exhaust gas at high enthalpy shock tunnel

    Shigematsu, K., Matsuo, A., Itoh, K. & Komuro, T., 2009 Dec 1, 16th AIAA/DLR/DGLR International Space Planes and Hypersonic Systems and Technologies Conference. 2009-7339. (16th AIAA/DLR/DGLR International Space Planes and Hypersonic Systems and Technologies Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Numerical and experimental investigations on atomization of air-blasted liquid film

    Ohta, S., Matsuo, A. & Horikawa, A., 2009 Dec 1, 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 2009-0997. (47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Numerical simulation of oxygen transport in cerebral tissue

    Kondo, T., Oyama, K., Komatsu, H. & Sugiura, T., 2009 Dec 1, Oxygen Transport to Tissue XXX. Liss, P., Hansell, P., Bruley, D. & Harrison, D. (eds.). p. 147-153 7 p. (Advances in Experimental Medicine and Biology; vol. 645).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Photoluminescence of cubic and monoclinic Gd 2o 3:Eu phosphors prepared by spray flame synthesis

    Iwako, Y., Akimoto, Y., Omiya, M., Ueda, T. & Yokomori, T., 2009 Dec 1, Advances and Trends in Engineering Materials and their Applications - Proceedings of AES-ATEMA'2009 4th International Conference. p. 161-166 6 p. (AES-ATEMA International Conference Series - Advances and Trends in Engineering Materials and their Applications).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Potential of plug-in hybrid electric vehicle for reduction of CO2 emission and role of non-fossil power plant

    Hiwatari, R., Okano, K. & Yamamoto, H., 2009 Jan 1, International Congress on Advances in Nuclear Power Plants 2009, ICAPP 2009. Atomic Energy Society of Japan, p. 2417-2424 8 p. (International Congress on Advances in Nuclear Power Plants 2009, ICAPP 2009; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Supersonic combustion with supersonic injection through diamond-shaped orifices

    Tomioka, S., Kohchi, T., Masumoto, R., Izumikawa, M. & Matsuo, A., 2009, 45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. (45th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    6 Citations (Scopus)
  • Three dimensional spheroids formation platform using micro-rotation flow

    Ota, H., Deguchi, K., Yamamoto, R., Kazoe, Y., Hishida, K., Sato, Y. & Miki, N., 2009 Jan 1, Proceedings of Conference, MicroTAS 2009 - The 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences. Chemical and Biological Microsystems Society, p. 1183-1185 3 p. (Proceedings of Conference, MicroTAS 2009 - The 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Three-dimensional spheroids forming lab-on-a-chip using micro-rotation flow

    Ota, H., Yamamoto, R., Deguchi, K. & Miki, N., 2009 Dec 1, 20th Anniversary MHS 2009 and Micro-Nano Global COE - 2009 International Symposium on Micro-NanoMechatronics and Human Science. p. 320-325 6 p. 5351898. (20th Anniversary MHS 2009 and Micro-Nano Global COE - 2009 International Symposium on Micro-NanoMechatronics and Human Science).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Toward cost-effective Control of Wall Turbulence for Skin Friction Drag Reduction

    Kasagi, N., Hasegawa, Y. & Fukagata, K., 2009, Advances in Turbulence XII - Proceedings of the 12th EUROMECH European Turbulence Conference, 2009. Eckhardt, B. (ed.). Springer Science and Business Media Deutschland GmbH, p. 189-200 12 p. (Springer Proceedings in Physics; vol. 132).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    36 Citations (Scopus)
  • 2008

    A liquid rate gyroscope using electro-conjugate fluid

    Yokota, S., Imamura, T., Takemura, K., Edamura, K. & Kumagai, H., 2008, ISSNIP 2008 - Proceedings of the 2008 International Conference on Intelligent Sensors, Sensor Networks and Information Processing. p. 459-464 6 p. 4762031. (ISSNIP 2008 - Proceedings of the 2008 International Conference on Intelligent Sensors, Sensor Networks and Information Processing).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • A liquid rate gyroscope using electro-conjugate fluid - Practical design and characterization

    Yokota, S., Takemura, K., Suzuki, M., Edamura, K., Kumagai, R. & Imamura, T., 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS. 4651249. (2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • A phase-field simulation of nucleation from subgrain and grain growth in static recrystallization

    Muramatsu, M., Tadano, Y. & Shizawa, K., 2008, Materials Science Forum - Nanomaterials by Severe Plastic Deformation 4 - 4th International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications Ltd, p. 1045-1050 6 p. (Materials Science Forum; vol. 584-586 PART 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Citations (Scopus)
  • Application of an emergent design system to artificial hip stem and Body in White

    Sato, K., Ujiie, Y. & Matsuoka, Y., 2008 Dec 1, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. PARTS A AND B ed. p. 753-760 8 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 3, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Application to artificial hip stem design of an emergent design system applicable in the early process of design

    Sato, K., Ujiie, Y. & Matsuoka, Y., 2008 Sep 19, Proceedings - The 2nd IEEE International Conference on Secure System Integration and Reliability Improvement, SSIRI 2008. p. 179-180 2 p. 4579813. (Proceedings - The 2nd IEEE International Conference on Secure System Integration and Reliability Improvement, SSIRI 2008).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • A proposal of classification and guideline of selection for design modeling methods

    Asanuma, T., Kawashima, J., Ujiie, Y. & Matsuoka, Y., 2008, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 551-558 8 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 2 PART A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • Assessing the biocompatibility of Ni-Ti alloy treated with thermal oxidation in vitro and in vivo

    Matsumura, Y., Komotori, J. & Tamaushi, H., 2008 Dec 1, 8th World Biomaterials Congress 2008. 1 p. (8th World Biomaterials Congress 2008; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • A triple-scale crystal plasticity simulation on yield behavior of annealed FCC fine-grained metals

    Kurosawa, E., Aoyagi, Y., Tadano, Y. & Shizawa, K., 2008, Materials Science Forum - Nanomaterials by Severe Plastic Deformation 4 - 4th International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications Ltd, p. 1027-1032 6 p. (Materials Science Forum; vol. 584-586 PART 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Combustion performance of supersonic combustor with stinger-shaped fuel injector

    Kouchi, T., Hirano, K., Matsuo, A., Kobayashi, K., Tomioka, S. & Izumikawa, M., 2008 Dec 1, 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. (44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Citations (Scopus)
  • Development of titanium/zirconia composite by spark plasma sintering (SPS) method for artificial hip joint

    Kotani, H., Saito, T., Kikuchi, S., Komotori, J., Naruse, T., Katahira, K. & Ohmori, H., 2008 Dec 1, Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008. p. 205-208 4 p. (Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Dissipative particle dynamics studies on the self-assembling dynamics of the peptide amphiphiles

    Seki, T., Arai, N., Ozawa, T., Shimada, T., Yasuoka, K. & Hotta, A., 2008, Design, Fabrication, and Self Assembly of "Patchy" and Anisometric Particles. Materials Research Society, p. 143-149 7 p. (Materials Research Society Symposium Proceedings; vol. 1135).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Effect of fine particle peening on fatigue properties of AISI 4135 steel with different hardness

    Hirota, Y., Kikuchi, S. & Komotori, J., 2008 Dec 1, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. p. 874-881 8 p. (17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Effect of reprocessing on the mechanical properties of poly(butylene- succinate)

    Nakashima, S., Hotta, A. & Somiya, S., 2008, Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008. p. 1782-1789 8 p. (Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Effects of Pre-strain / Stress on corrosion behaviour of metallic biomaterials

    Hisamori, N. & Komotori, J., 2008 Dec 1, 8th World Biomaterials Congress 2008. 1 p. (8th World Biomaterials Congress 2008; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Electrokinetic actuation of low conductivity dielectric liquids

    Raghavan, R., Qin, J., Yeo, L. Y., Friend, J. R., Takemura, K., Yokota, S. & Edamura, K., 2008, Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008. PART A ed. p. 459-466 8 p. (Proceedings of the 6th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2008; no. PART A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Citations (Scopus)
  • Evaluation and characterization of plastics-made sheet type components under impact

    Machmud, M. N., Omiya, M., Inoue, H. & Kishimoto, K., 2008, Advances in Fracture and Materials Behavior - Selected, peer reviewed papers of the Seventh International Conference on Fracture and Strength of Solids (FEOFS2007). Trans Tech Publications, p. 381-386 6 p. (Advanced Materials Research; vol. 33-37 PART 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Experimental and numerical study of reduction of pressure wave in large caliber gun chamber

    Nakamura, Y., Miura, H. & Matsuo, A., 2008, Proceedings - 24th International Symposium on Ballistics, BALLISTICS 2008. Bless, S. & Walker, J. (eds.). DEStech Publications Inc., p. 321-328 8 p. (Proceedings - 24th International Symposium on Ballistics, BALLISTICS 2008; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Fatigue properties of pre-FPP (Fine Particle Peening) treated and gas Nitrided austenitic stainless steel

    Kikuchi, S., Nakahara, Y. & Komotori, J., 2008 Dec 1, Materials Science and Technology Conference and Exhibition MS and T'08. p. 741-752 12 p. (Materials Science and Technology Conference and Exhibition, MS and T'08; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Fracture of conductive ceramic thin film on polymer substrate in opto-electric devices

    Omiya, M., 2008 Dec 1, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. p. 1778-1783 6 p. (17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Influence of PRE-FPP (fine particle peening) on fatigue fracture mechanism of nitrided AISI 4135 steel

    Kikuchi, S., Lshii, K. & Komotori, J., 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. p. 866-873 8 p. (17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Interior ballistics simulation of projectile launch system utilizing tubular solid propellant

    Miura, H., Matsuo, A. & Nakamura, Y., 2008, 44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit. (44th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    12 Citations (Scopus)
  • Mathematical formulation of macroscopic feature for digital style design

    Kawanishi, S., Matsunaga, E., Ujiie, Y. & Matsuoka, Y., 2008 Dec 1, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. PARTS A AND B ed. p. 785-789 5 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 3, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Mechanical behavior of UV irradiated glass fiber reinforced composite material

    Hayabusa, K., Kudo, D., Ohtani, T., Omiya, M., Inoue, H. & Kishimoto, K., 2008 Dec 1, Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008. p. 157-159 3 p. (Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Multiscale crystal plasticity simulation with pseudo-three-dimensional model on ultrafine-graining based on evolution of dislocation structures

    Aoyagi, Y., Horibe, N. & Shizawa, K., 2008, Materials Science Forum - Nanomaterials by Severe Plastic Deformation 4 - 4th International Conference on Nanomaterials by Severe Plastic Deformation. Trans Tech Publications Ltd, p. 1057-1062 6 p. (Materials Science Forum; vol. 584-586 PART 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Numerical analysis of projectile-launch tube wall friction effects on projectile acceleration in single-stage gun

    Miura, H. & Matsuo, A., 2008 Jan 1, Explosion, Shock Wave and Hypervelocity Phenomena in Materials II - Selected, peer reviewed papers from the 2nd International Symposium on Explosion, Shock Wave and Hypervelocity Phenomena (ESHP-2). Trans Tech Publications Ltd, p. 71-76 6 p. (Materials Science Forum; vol. 566).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Numerical simulation of projectile acceleration process using solid/gas two-phase reacting flow model

    Miura, H., Matsuo, A. & Nakamura, Y., 2008, Proceedings - 24th International Symposium on Ballistics, BALLISTICS 2008. Bless, S. & Walker, J. (eds.). DEStech Publications Inc., p. 273-280 8 p. (Proceedings - 24th International Symposium on Ballistics, BALLISTICS 2008; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Overheads in accelerating molecular dynamics simulations with GPUs

    Narumi, T., Sakamaki, R., Kameoka, S. & Yasuoka, K., 2008 Dec 1, Proceedings - 9th International Conference on Parallel and Distributed Computing, Applications and Technologies, PDCAT 2008. p. 143-150 8 p. 4710974. (Parallel and Distributed Computing, Applications and Technologies, PDCAT Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    6 Citations (Scopus)
  • Passage through resonance in a vibration isolation system (effects of rate of increasing the voltage applied to D.C. motor)

    Tange, T., Kawana, R., Tokoyoda, T., Yoshizawa, M. & Sugiura, T., 2008 Jun 13, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 405-414 10 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 1 PART A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Quenching characteristics of YBCO bulk contacts

    Sawa, K., Fukuda, K., Ogawa, K., Tomita, M., Murakami, M., Sakai, N. & Hirabayashi, I., 2008, 2008 Proceedings of the 54th IEEE Holm Conference on Electrical Contacts, HOLM 2008. p. 319-324 6 p. 4694963. (Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Structural, thermal and rheological studies on newly developed polyesters randomly copolymerized with poly (tetramethylene glycol) (PTMG)

    Matsumoto, O. & Hotta, A., 2008 Dec 1, Selecting and Qualifying New Materials for Use in Regulated Industries. p. 43-48 6 p. (Materials Research Society Symposium Proceedings; vol. 1151).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Three dimensional spheroids formation platform using micro-rotation flow

    Ota, H., Deguchi, K., Kita, S., Yamamoto, R. & Miki, N., 2008, 2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on "COE for Education and Research of Micro-Nano Mechatronics". p. 202-207 6 p. 4752450. (2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Toughening mechanism of PP with bimodal distributed SEBS particle size

    Mae, H., Omiya, M. & Kishimoto, K., 2008 Dec 22, Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008. p. 233-239 7 p. (Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Citations (Scopus)
  • 2007

    A coaxial combination of slotted-tube resonators for magnetic resonance imaging

    Miyamoto, T., Mizuuchi, N., Moroi, T., Maruyama, K., Migita, M., Ogawa, K., Usagawa, T., Akiyama, H. & Iriguchi, N., 2007 Dec 1, 2007 IEEE/ICME International Conference on Complex Medical Engineering, CME 2007. p. 623-626 4 p. 4381811. (2007 IEEE/ICME International Conference on Complex Medical Engineering, CME 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • A design method that integrates the early and late process of design

    Nomura, Y., Ujiie, Y. & Matsuoka, Y., 2007 Dec 1, Proceedings of ICED 2007, the 16th International Conference on Engineering Design. (Proceedings of ICED 2007, the 16th International Conference on Engineering Design; vol. DS 42).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • A resonator for a wrist-sized, 0.2T permanent magnet MRI machine

    Murao, M., Miyamoto, T., Migita, M., Ogawa, K., Akiyama, H., Usagawa, T. & Iriguchi, N., 2007 Dec 1, 2007 IEEE/ICME International Conference on Complex Medical Engineering, CME 2007. p. 858-861 4 p. 4381863. (2007 IEEE/ICME International Conference on Complex Medical Engineering, CME 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • A trial for micro-scale evaluation of adhesion strength around Cu metallization systems

    Kamiya, S., Arakawa, H., Shimomura, H. & Omiya, M., 2007 Jan 1, Materials, Processes, Integration and Reliability in Advanced Interconnects for Micro- and Nanoelectronics. Materials Research Society, p. 213-218 6 p. (Materials Research Society Symposium Proceedings; vol. 990).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Characteristic parameters of a tuned magnetid fluid damper under magnetic fields

    Ohno, K. I., Shimoda, M. & Sawada, T., 2007 Dec 1, 2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. PART A ed. p. 323-326 4 p. (2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007; vol. 2 FORA, no. PART A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Characteristics of a tuned liquid damper using a magnetic fluid

    Ohno, K., Shimoda, M., Sawada, T. & Hone, S., 2007 Jan 1, Proceedings of the 10th International Conference on Electrorheological Fluids and Magnetorheological Suspensions. World Scientific Publishing Co. Pte Ltd, p. 459-466 8 p. (Proceedings of the 10th International Conference on Electrorheological Fluids and Magnetorheological Suspensions).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Demonstration of a telemetric system using gastric-fluid-utilizing micro battery

    Jimbo, H. & Miki, N., 2007, Proceedings of the 11th International Conference on Miniaturized Systems for Chemistry and Life Sciences, uTAS 2007. Viovy, J-L., Tabeling, P., Descroix, S. & Malaquin, L. (eds.). Chemical and Biological Microsystems Society, p. 1759-1761 3 p. (Proceedings of the 11th International Conference on Miniaturized Systems for Chemistry and Life Sciences, uTAS 2007).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • ELID grinding characteristics and surface modifying effects on precise lens mold materials

    Katahira, K., Ohmori, H., Saito, T., Komotori, J. & Mizutani, M., 2007, Proceedings of the 7th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2007. Thornett, E. (ed.). euspen, p. 441-444 4 p. (Proceedings of the 7th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2007; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)