If you made any changes in Pure these will be visible here soon.

Research Output 1984 2019

2019

Development of a three-dimensional encoder for highly accurate positioning

Tamiya, H., Mitera, Y., Taniguchi, K., Aoyama, H. & Yamazakf, K., 2019 Jan 1, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 85, 10, p. 891-895 5 p.

Research output: Contribution to journalArticle

Detectors
Controllability
Interferometers
Atmospheric humidity
Semiconductor materials

Image based identification of cutting tools in turning-milling machines

Rifai, A. P., Fukuda, R. & Aoyama, H., 2019 Jan 1, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 85, 2, p. 159-166 8 p.

Research output: Contribution to journalArticle

Open Access
Milling machines
Cutting tools
Machining
Neural networks
Feedback
Open Access
Surface roughness
Machining
Computer vision
Surface properties
Feature extraction
2018
1 Citation (Scopus)

Analysis of tool deflection errors in precision CNC end milling of aerospace Aluminum 6061-T6 alloy

Nghiep, T. N., Sarhan, A. A. D. & Aoyama, H., 2018 Sep 1, In : Measurement: Journal of the International Measurement Confederation. 125, p. 476-495 20 p.

Research output: Contribution to journalArticle

deflection
aluminum
Aluminum
Milling (machining)
Lubrication
Defects
Plastic products
Injection molding
Welds
Cameras
1 Citation (Scopus)

Detection principle and verification of non-contact displacement meter with pico-meter resolution

Tamiya, H., Taniguchi, K., Yamazaki, K. & Aoyama, H., 2018 Jan 1, In : Journal of Advanced Mechanical Design, Systems and Manufacturing. 12, 5

Research output: Contribution to journalArticle

Distance measurement
Interferometers
Lasers
Sensors
Semiconductor lasers
1 Citation (Scopus)

Development of design system for crack patterns on cup surface based on KANSEI

Misaka, M. & Aoyama, H., 2018 Jan 1, (Accepted/In press) In : Journal of Computational Design and Engineering.

Research output: Contribution to journalArticle

System Design
Crack
Cracks
Neural Networks
Neural networks
1 Citation (Scopus)

Development of super-accurate angular encoder system with multi-detecting heads using VEDA method

Ishii, N., Taniguchi, K., Yamazaki, K. & Aoyama, H., 2018 Jan 1, In : Journal of Advanced Mechanical Design, Systems and Manufacturing. 12, 5

Research output: Contribution to journalArticle

Calibration
Machine tools
Sensors
Networks (circuits)
1 Citation (Scopus)

Green product preferences with respect to cultural influences: Empirical study in indonesia

Ghazali, I., Rashid, S. H. A., Dawal, S. Z. M., Aoyama, H., Tontowi, A. E. & Ghazilla, R. A. R., 2018 Nov 1, In : International Journal of Automation Technology. 12, 6, p. 842-852 11 p.

Research output: Contribution to journalArticle

Sustainable development
Uncertainty

Method of emerging delight design based on Kansei

Tanaka, Y. & Aoyama, H., 2018 Jan 1, 38th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), Vol. 1B-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Customers
Evaluation Model
Neural networks
Manufacturing
Beer

Modification method of drawn design on decorating film/shrink film for obtaining distortion-free design

Fujii, S., Suzuki, R., Aoyama, H. & Mori, Y., 2018 Mar 13, (Accepted/In press) In : Computer-Aided Design and Applications. p. 1-7 7 p.

Research output: Contribution to journalArticle

Plastic products
Plastics
Design Patterns
Product Design
Design
6 Citations (Scopus)

Non-dominated sorting biogeography-based optimization for bi-objective reentrant flexible manufacturing system scheduling

Rifai, A. P., Nguyen, H. T., Aoyama, H., Dawal, S. Z. M. & Masruroh, N. A., 2018 Jan 1, In : Applied Soft Computing Journal. 62, p. 187-202 16 p.

Research output: Contribution to journalArticle

Flexible manufacturing systems
Sorting
Scheduling
Unloading
Computational complexity
1 Citation (Scopus)

Super-accurate angular encoder system with multi-detecting heads using VEDA method

Ishii, N., Taniguchi, K., Yamazaki, K. & Aoyama, H., 2018 Jan 1, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 84, 8, p. 717-723 7 p.

Research output: Contribution to journalArticle

Calibration
Mountings
Machine tools
Sensors
2017

Basic study on development of delight design method -proposal and application of beer cup design based on value model and evaluation model of kansei

Tanaka, Y., Misaka, M. & Aoyama, H., 2017 Jan 1, 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), Vol. 1. 68089

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Beer
Evaluation Model
Design Method
Customers
Model

Basic study on development of innovative CNC for improving machining quality based on data sharing

Sudo, M., Mizuno, T. & Aoyama, H., 2017 Nov 13, Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017. Japan Society of Mechanical Engineers, 054

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machining
Controllers
Computer aided manufacturing
Machine tools
Data structures
5 Citations (Scopus)

Cultural Influences on Choosing Green Products: An Empirical Study in MALAYSIA

Ghazali, I., Abdul-Rashid, S. H., Dawal, S. Z. M., Aoyama, H., Tontowi, A. E. & Sakundarini, N., 2017, (Accepted/In press) In : Sustainable Development.

Research output: Contribution to journalArticle

cultural influence
Sustainable development
customer
Malaysia
Industry

Detection principle and verification of non-contact displacement meter with Pico-meter resolution

Tamiya, H., Taniguchi, K., Yamazaki, K. & Aoyama, H., 2017 Nov 13, Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017. Japan Society of Mechanical Engineers, 027

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Interferometers
Distance measurement
Lasers
Sensors
Semiconductor lasers
1 Citation (Scopus)
Machine tools
Machining
Computer aided manufacturing
Scheduling
Experiments

Development of automatic system for process planning and NC program generation on turning-milling machine tool with three turrets

Fukuda, R., Kiyooka, R. & Aoyama, H., 2017 Jan 1, Systems, Design, and Complexity. American Society of Mechanical Engineers (ASME), Vol. 11.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Milling machines
Process planning
Machine tools
Machining
Decomposition
Milling machines
Process planning
Machine tools
Machining
Decomposition
Open Access
Computer aided process planning
Identification (control systems)
Computer aided design
Computer aided manufacturing
Artificial intelligence

Digital design method of dyeing patterns based on kansei

Ichimura, Y. & Aoyama, H., 2017 Jan 1, 37th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), Vol. 1. 67244

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dyeing
Design Method
Dyes
Yarn
Physical property
1 Citation (Scopus)

Integration of grey-based Taguchi method and principal component analysis for multi-response decision-making in Kansei engineering

Sutono, S. B., Abdul-Rashid, S. H., Taha, Z., Subagyo & Aoyama, H., 2017, In : European Journal of Industrial Engineering. 11, 2, p. 205-227 23 p.

Research output: Contribution to journalArticle

Taguchi methods
Principal component analysis
Decision making
Railroad cars
Passenger cars

Method for producing three-dimensional designs in film insert molding

Fujii, S., Aoyama, H., Mori, Y., Azagami, Y. & Harada, S., 2017 Jan 1, Systems, Design, and Complexity. American Society of Mechanical Engineers (ASME), Vol. 11.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Die casting inserts
Molding
Plastic products
Product design
Plastics
1 Citation (Scopus)
Machining
Traveling salesman problem
Machine tools
Genetic algorithms
Engines

Performance improvement of machine tool by high accuracy calibration of built-in rotary encoders

Ishii, N., Taniguchi, K., Yamazaki, K. & Aoyama, H., 2017 Nov 13, Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017. Japan Society of Mechanical Engineers, 020

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machine tools
Calibration
Ceramic products
Cracks
Neural networks

Study on digital style design - Robust design system for Kansei using multivariate analysis and taguchi method

Aoyama, H. & Yokoyama, H., 2017 Jan 1, Proceedings of the International Conference on Interfaces and Human Computer Interaction 2017 - Part of the Multi Conference on Computer Science and Information Systems 2017. IADIS, p. 10-18 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Taguchi methods
Multivariate Analysis
Digital cameras
Product development
1 Citation (Scopus)

The effects of single cutting tool geometry on surface roughness

Mohammad, R., Ariffin, M. K. A. M., Baharuddin, B. T. H. T., Mustapha, F. & Aoyama, H., 2017 Jan 1, In : Journal of Mechanical Engineering. SI 3, 1, p. 45-54 10 p.

Research output: Contribution to journalArticle

Cutting tools
Surface roughness
Geometry
Carbide tools
Aluminum nitride
20 Citations (Scopus)

Theoretical analysis to determine the efficiency of a CuO-water nanofluid based-flat plate solar collector for domestic solar water heating system in Myanmar

Sint, N. K. C., Choudhury, I. A., Masjuki, H. H. & Aoyama, H., 2017, In : Solar Energy. 155, p. 608-619 12 p.

Research output: Contribution to journalArticle

Solar collectors
Heating
Water
Collector efficiency
Nanoparticles
2 Citations (Scopus)

Ultraprecision Machining of Silicon Wafer by Micromilling Process

Golshan, A., Baharudin, B. T. H. T., Aoyama, H., Ariffin, M. K. A. M., Ismail, M. I. S. & Ehsan, A. A., 2017, In : Procedia Engineering. 184, p. 192-196 5 p.

Research output: Contribution to journalArticle

Silicon wafers
Machining
Silicon
Cubic boron nitride
Micromachining
2016
2 Citations (Scopus)

Accurate estimation of cutting time based on control principle of machine tool

Saito, K., Aoyama, H. & Sano, N., 2016, In : International Journal of Automation Technology. 10, 3, p. 429-437 9 p.

Research output: Contribution to journalArticle

Machine tools
Machining
Deceleration
Error analysis
Computer systems
19 Citations (Scopus)

An integrated MCDM model for conveyor equipment evaluation and selection in an FMC based on a Fuzzy AHP and Fuzzy ARAS in the presence of vagueness

Nguyen, H. T., Md Dawal, S. Z., Nukman, Y., Rifai, A. P. & Aoyama, H., 2016 Apr 1, In : PLoS One. 11, 4, e0153222.

Research output: Contribution to journalArticle

multi-criteria decision making
Cellular manufacturing
Analytic hierarchy process
decision support systems
Decision Making
18 Citations (Scopus)

A study on machining of binder-less polycrystalline diamond by femtosecond pulsed laser for fabrication of micro milling tools

Ogawa, Y., Ota, M., Nakamoto, K., Fukaya, T., Russell, M., Zohdi, T. I., Yamazaki, K. & Aoyama, H., 2016, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journalArticle

Pulsed lasers
Binders
Diamonds
Machining
Fabrication

Burr prediction due to flank wear in end-milling

Kruy, S. & Aoyama, H., 2016 Dec 16, International Symposium on Flexible Automation, ISFA 2016. Institute of Electrical and Electronics Engineers Inc., p. 412-417 6 p. 7790198

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wear of materials
Cutting tools
Carbide tools
Aluminum alloys
Carbon
4 Citations (Scopus)
Taguchi methods
Railroad cars
Fuzzy logic
Design optimization
4 Citations (Scopus)

Reentrant FMS scheduling in loop layout with consideration of multi loading-unloading stations and shortcuts

Rifai, A. P., Dawal, S. Z. M., Zuhdi, A., Aoyama, H. & Case, K., 2016 Feb 1, In : International Journal of Advanced Manufacturing Technology. 82, 9-12, p. 1527-1545 19 p.

Research output: Contribution to journalArticle

Flexible manufacturing systems
Unloading
Scheduling
Phonographs
Computational complexity
2015

A method for identification of control parameters of NC machine tool and its utilization for high-speed machining and accurate machining time estimation

Yamamoto, Y., Aoyama, H. & Sano, N., 2015 Oct 18, Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015. Japan Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machine tools
Machining
Sampling
Deceleration
Surface properties
31 Citations (Scopus)

An integrated approach of fuzzy linguistic preference based AHP and fuzzy COPRAS for machine tool evaluation

Nguyen, H. T., Md Dawal, S. Z., Nukman, Y., Aoyama, H. & Case, K., 2015 Sep 14, In : PLoS One. 10, 9, e0133599.

Research output: Contribution to journalArticle

Analytic hierarchy process
Linguistics
Machine tools
Decision Making
manufacturing
5 Citations (Scopus)
Milling (machining)
Process planning
Machining
Machining centers
Processing
2 Citations (Scopus)

Digital design of crack patterns with natural impressions on pottery

Shimizu, K. & Aoyama, H., 2015, 35th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), Vol. 1B-2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crack
Cracks
Fractal dimension
Fractal Dimension
Fractal Analysis

Efficient shape-editing method for curves and surfaces based on the quantification of aesthetic properties

Oya, T., Hanafusa, E. & Aoyama, H., 2015 Nov 2, In : Computer-Aided Design and Applications. 12, 6, p. 733-741 9 p.

Research output: Contribution to journalArticle

Curves and Surfaces
Quantification
Product design
Industrial Design
Curve

High efficiency machining of curved surfaces using 5 axis machine tool

Yamagata, S., Aoyama, H. & Sano, N., 2015 Oct 18, Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015. Japan Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Machine tools
Machining
Personnel
Experiments
1 Citation (Scopus)

State of the art and future trend of 3D-CAD/CAM

Aoyama, H., 2015 Mar 1, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 81, 3, p. 206-210 5 p.

Research output: Contribution to journalReview article

Computer aided manufacturing
Computer aided design

Tool paths planning under window framing scheme for burr minimization

Kruy, S., Aoyama, H. & Sano, N., 2015 Jun 1, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 81, 6, p. 598-603 6 p.

Research output: Contribution to journalArticle

Motion planning
Deburring
Simulators
Milling (machining)
Costs
2014
77 Citations (Scopus)

A hybrid approach for fuzzy multi-attribute decision making in machine tool selection with consideration of the interactions of attributes

Nguyen, H. T., Dawal, S. Z. M., Nukman, Y. & Aoyama, H., 2014 May, In : Expert Systems with Applications. 41, 6, p. 3078-3090 13 p.

Research output: Contribution to journalArticle

Machine tools
Decision making
Sensitivity analysis
Demonstrations
Productivity
20 Citations (Scopus)
Milling (machining)
Process planning
Machining
Application programming interfaces (API)

Curved surfaces forming of sheet material by laser irradiation

Kishida, K., Aoyama, H., Matsushita, N. & Ushimaru, A., 2014, Advanced Materials Research. Trans Tech Publications Ltd, Vol. 1017. p. 788-793 6 p. (Advanced Materials Research; vol. 1017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Laser beam effects
Lasers
Laser beams
Finite element method
Molds

Fabric model for clothing design by wrinkle simulation

Hara, A., Aoyama, H. & Oya, T., 2014, In : Journal of Mechanical Science and Technology. 28, 7, p. 2453-2458 6 p.

Research output: Contribution to journalArticle

Point contacts
Mechanical properties
Yarn
Friction

Fabric simulation using measurement data for dress design

Hara, A., Aoyama, H. & Oya, T., 2014, 34th Computers and Information in Engineering Conference. American Society of Mechanical Engineers (ASME), Vol. 1B.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Simulation
Mechanical Properties
Wrinkling
Folding
Simulation Model