• Source: Scopus
  • Calculated based on no. of publications stored in Pure and citations from Scopus
1984 …2021

Research activity per year

If you made any changes in Pure these will be visible here soon.
Filter
Conference contribution

Search results

  • 2002

    Computer aided chair design system using form features

    Matsumoto, M. & Aoyama, H., 2002, Proceedings of the International Conference on Information Visualisation. Institute of Electrical and Electronics Engineers Inc., Vol. 2002-January. p. 135-138 4 p. 1028768

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Free form modeling method based on silhouette and boundary lines

    Kamiya, J. & Aoyama, H., 2002 Jan 1, Proceedings - 6th International Conference on Information Visualisation, IV 2002. Institute of Electrical and Electronics Engineers Inc., p. 130-134 5 p. 1028767. (Proceedings of the International Conference on Information Visualisation; vol. 2002-January).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Citations (Scopus)
  • 2003

    Sensor to detect cutting force components, cutting torque, and cutting tool deflections

    Aoyama, H. & Ishii, T., 2003, 31st North American Manufacturing Research Conference 2003 - Transactions of the North American Manufacturing Research Institution of SME. p. 491-498 8 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 31).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2005

    Style design method based on form impressions

    Nordgren, A. & Aoyama, H., 2005, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conferences - DETC2005: 31st Design Automation Conference. American Society of Mechanical Engineers, p. 5-12 8 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference - DETC2005; vol. 2 A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • 2006

    Development of evaluation system for style design using mixed reality technology

    Kimishima, Y. & Aoyama, H., 2006, Proceedings of 2006 ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference, DETC2006. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; vol. 2006).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2007

    Human support improvements by natural man-machine collaboration

    Ozeki, M., Miyata, Y., Aoyama, H. & Nakamura, Y., 2007 Dec 1, International Multimedia Conference, MM'07 - Proceedings of the 2nd ACM International Workshop on Human-centered Multimedia, HCM'07. p. 95-101 7 p. (Proceedings of the ACM International Multimedia Conference and Exhibition).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Sketch based modeling system

    Aoyama, H. & Yamaguchi, H., 2007 Dec 1, Virtual Reality - Second International Conference, ICVR 2007. Held as part of HCI International 2007, Proceedings. p. 421-430 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 4563 LNCS).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2008

    Basic study on parameters to quantitatively evaluate shape impression

    Takeda, K. & Aoyama, H., 2008 Dec 1, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. PARTS A AND B ed. p. 851-858 8 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 3, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Basic study on trend prediction for style design

    Yoshida, S. & Aoyama, H., 2008 Dec 1, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. PARTS A AND B ed. p. 859-866 8 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 3, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Citations (Scopus)
  • Development of texture design system using fractal and 1/f fluctuation

    Nakatsuka, S. & Aoyama, H., 2008 Jun 13, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 319-326 8 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 2 PART A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Interaction reproducing model: A model for giving supports appropriate to user state

    Aoyama, H., Ozeki, M. & Nakamura, Y., 2008 Dec 1, Advances in Multimedia Information Processing - PCM 2008 - 9th Pacific Rim Conference on Multimedia, Proceedings. p. 426-435 10 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5353 LNCS).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Probabilistic evaluation of product development task planning using worth flow analysis

    Miwa, T., Aoyama, H. & Ishii, K., 2008, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. p. 227-235 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 5).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Citations (Scopus)
  • Virtual Studio System and facial emotion-expression

    Aoyama, H., Haginoya, R. & Umezawa, 2008 Jun 13, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 507-516 10 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 2 PART A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2009

    Basic study on parameters to quantitatively evaluate shape impression

    Takeda, K. & Aoyama, H., 2009 Nov 23, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART B ed. p. 851-858 8 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; vol. 3, no. PART B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Basic study on trend prediction for style design

    Yoshida, S. & Aoyama, H., 2009 Nov 23, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART B ed. p. 859-866 8 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; vol. 3, no. PART B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Collaboration design system using internet and virtual reality technology

    Aoyama, H. & Iida, R., 2009 Dec 1, Virtual and Mixed Reality - Third International Conference, VMR 2009, Held as Part of HCI International 2009, Proceedings. p. 513-521 9 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 5622 LNCS).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Computer aided style design system based on highlight lines

    Yano, S. & Aoyama, H., 2009 Dec 1, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B ed. p. 957-965 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Electrode design for oscillating EDM

    Nakamura, Y., Sriani, T. & Aoyama, H., 2009, Advances in Abrasive Technology XII. p. 645-650 6 p. (Advanced Materials Research; vol. 76-78).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Probabilistic evaluation of product development task planning us worth flow analysis

    Miwa, T., Aoyama, H. & Lshii, K., 2009, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. p. 227-235 9 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; vol. 5).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Product function - Component modeling using rough sets

    Miwa, T. & Aoyama, H., 2009, ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2009. PARTS A AND B ed. p. 167-175 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 8, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Smart cooking support system based on interaction reproducing model

    Aoyama, H., Ozeki, M. & Nakamura, Y., 2009 Dec 21, ACM 2009 Workshop on Multimedia for Cooking and Eating Activities, CEA'09, Co-located with the 2009 ACM International Conference on Multimedia, MM'09. p. 39-45 7 p. (ACM 2009 Workshop on Multimedia for Cooking and Eating Activities, CEA'09, Co-located with the 2009 ACM International Conference on Multimedia, MM'09).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    7 Citations (Scopus)
  • 2010

    A proposed study on facility planning and design in manufacturing process

    Dwijayanti, K., Dawal, S. Z. M., Jamasri & Aoyama, H., 2010 Dec 1, Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010. p. 1640-1645 6 p. (Proceedings of the International MultiConference of Engineers and Computer Scientists 2010, IMECS 2010).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    11 Citations (Scopus)
  • Capture, recognition, and visualization of human semantic interactions in meetings

    Yu, Z., Yu, Z., Aoyama, H., Ozeki, M. & Nakamura, Y., 2010, 2010 IEEE International Conference on Pervasive Computing and Communications, PerCom 2010. IEEE Computer Society, p. 107-115 9 p. 5466987. (2010 IEEE International Conference on Pervasive Computing and Communications, PerCom 2010).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    20 Citations (Scopus)
  • Design emerging system by applying consumer's preference to designer's idea

    Ohshima, K. & Aoyama, H., 2010, ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010. PARTS A AND B ed. p. 605-614 10 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 3, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Development of a crush and mix machine for composite brick fabrication

    Sothea, K., Fazli, N., Hamdi, M. & Aoyama, H., 2010 Dec 1, International Conference on Advances in Materials and Processing Technologies, AMPT2010. p. 1437-1442 6 p. (AIP Conference Proceedings; vol. 1315).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Development of CAD system based on function features

    Ando, S., Ikeda, R., Aoyama, H. & Hiruma, N., 2010, Advances in Precision Engineering. Trans Tech Publications Ltd, p. 442-446 5 p. (Key Engineering Materials; vol. 447 448).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Development of wood grain pattern design system

    Shibasaki, S. & Aoyama, H., 2010 Jun 25, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART B ed. p. 941-948 8 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009; vol. 2, no. PART B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Linkage of power consumption to design feature on turning process

    Taha, Z., Kurniati, H., Aoyama, H., Ghazilla, R. A., Gonzales, J. & Sakundarini, N., 2010 Dec 1, Proceedings of the 10th WSEAS International Conference on Robotics, Control and Manufacturing Technology, ROCOM '10. p. 74-78 5 p. (Proceedings of the 10th WSEAS International Conference on Robotics, Control and ManufProceedings of the 10th WSEAS International Conference on Robotics, Control and Manufacturing Technology, ROCOM '10).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    7 Citations (Scopus)
  • Product function - Component modeling using rough sets

    Miwa, T. & Aoyama, H., 2010, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART A ed. p. 167-175 9 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009; vol. 8, no. PART A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • System for 3D form generation and impression analysis based on emotional words: "Kansei words

    Aoyama, H. & Miyauchi, S., 2010 Dec 1, ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2010. PARTS A AND B ed. p. 615-621 7 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 3, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • 2011

    A study of kansei engineering in pet bottle silhouette

    Widiyati, K. & Aoyama, H., 2011, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B ed. p. 849-858 10 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    9 Citations (Scopus)
  • Design creation system based on designer's Kansei and consumer's preference

    Aoyama, H. & Ohshima, K., 2011 Dec 1, Proceedings of the IADIS International Conference Interfaces and Human Computer Interaction 2011, Part of the IADIS Multi Conference on Computer Science and Information Systems 2011, MCCSIS 2011. p. 241-248 8 p. (Proceedings of the IADIS International Conference Interfaces and Human Computer Interaction 2011, Part of the IADIS Multi Conference on Computer Science and Information Systems 2011, MCCSIS 2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Development of system for high quality wood grain design

    Mori, T., Shibasaki, S. & Aoyama, H., 2011 Dec 1, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B ed. p. 907-915 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • Reverse engineering system based on uniforming measurement data in 3D-lattice

    Shibata, G., Aoyama, H. & Sato, M., 2011 Dec 1, ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2011. PARTS A AND B ed. p. 887-895 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Virtual clay modeling system based on aesthetic curves

    Aoyama, H. & Kai, H., 2011 Dec 1, ASME 2011 World Conference on Innovative Virtual Reality, WINVR 2011. p. 97-102 6 p. (ASME 2011 World Conference on Innovative Virtual Reality, WINVR 2011).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2012

    Application of robust design approach for design parameterization in Kansei engineering

    Sutono, S. B., Taha, Z., Rashid, S. H. A., Aoyama, H. & Subagyo, 2012, Advanced Mechanical Design. p. 1670-1680 11 p. (Advanced Materials Research; vol. 479-481).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    7 Citations (Scopus)
  • Automatic reverse engineering based on reconstructing measurement data in 3D-lattice

    Tsushima, K. & Aoyama, H., 2012, Emerging Technology in Precision Engineering XIV. Trans Tech Publications Ltd, p. 414-419 6 p. (Key Engineering Materials; vol. 523-524).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • Basic study on laser forming method for curved surfaces

    Keisuke, K., Nakamura, T., Aoyama, H., Matsushita, N. & Ushimaru, A., 2012, Emerging Technology in Precision Engineering XIV. Trans Tech Publications Ltd, p. 995-1000 6 p. (Key Engineering Materials; vol. 523-524).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • CAD system for utilizing design information and know-how based on function features

    Ando, S., Aoyama, H. & Sano, N., 2012, ASME/ISCIE 2012 International Symposium on Flexible Automation, ISFA 2012. American Society of Mechanical Engineers (ASME), p. 47-52 6 p. (ASME/ISCIE 2012 International Symposium on Flexible Automation, ISFA 2012).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Citations (Scopus)
  • Coupling of packaging efficiency and aesthetic shapes for PET bottles

    Widiyati, K. & Aoyama, H., 2012 Dec 1, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012. PARTS A AND B ed. p. 551-558 8 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Determination method of locations and postures of cutting tool for 5-axis machining based on intuition and minimum cusp height

    Aoyama, H., Suzuki, Y. & Sano, N., 2012, Proceedings of Precision Engineering and Nanotechnology. Trans Tech Publications Ltd, p. 96-101 6 p. (Key Engineering Materials; vol. 516).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Emergence system of pattern design showing natural impression

    Kamahara, Y., Aoyama, H. & Oya, T., 2012 Dec 1, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012. PARTS A AND B ed. p. 637-644 8 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Estimation system of accurate cutting time based on actual feedrate identification

    Saito, K., Aoyama, H. & Sano, N., 2012, Proceedings of Precision Engineering and Nanotechnology. Trans Tech Publications Ltd, p. 113-118 6 p. (Key Engineering Materials; vol. 516).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Generation of NC program for realizing high speed feed rate of cutting tool

    Sakurai, S., Aoyama, H. & Sano, N., 2012, Emerging Technology in Precision Engineering XIV. Trans Tech Publications Ltd, p. 398-403 6 p. (Key Engineering Materials; vol. 523-524).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Gripping stability to assess aesthetical shape: A pet bottle case study

    Widiyati, K. & Hideki, A., 2012, Machine Design and Manufacturing Engineering. p. 454-461 8 p. (Advanced Materials Research; vol. 566).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Citation (Scopus)
  • Method to decide paths and postures of flat end mill for 5-axis control machining based on minimum cusp height

    Hokkyo, T., Aoyama, H. & Sano, N., 2012, Emerging Technology in Precision Engineering XIV. Trans Tech Publications Ltd, p. 380-385 6 p. (Key Engineering Materials; vol. 523-524).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Style design system based on Class A Bézier curves for high-quality aesthetic shapes

    Oya, T., Kimura, F. & Aoyama, H., 2012 Dec 1, ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2012. PARTS A AND B ed. p. 627-635 9 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2, no. PARTS A AND B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Citations (Scopus)
  • 2013

    Effectiveness of ultrasonic vibration on press forming

    Ashida, Y. & Aoyama, H., 2013, Advances in Abrasive Technology XVI. p. 350-355 6 p. (Advanced Materials Research; vol. 797).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Low cost mixed reality system using projectors for evaluation of product design (shape and function structure)

    Chinone, Y., Aoyama, H. & Oya, T., 2013 Jan 1, 33rd Computers and Information in Engineering Conference. American Society of Mechanical Engineers, V02BT02A033. (Proceedings of the ASME Design Engineering Technical Conference; vol. 2 B).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Selecting a CNC machine tool using the intuitionistic fuzzy TOPSIS approach for FMC

    Tho, N. H., Dawal, S. Z. M., Yusoff, N., Tahriri, F. & Aoyama, H., 2013, Mechanical and Manufacturing Engineering. p. 196-205 10 p. (Applied Mechanics and Materials; vol. 315).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Citations (Scopus)