If you made any changes in Pure these will be visible here soon.

Research Output 1987 2019

  • 1165 Citations
  • 18 h-Index
  • 147 Article
  • 32 Conference contribution
  • 2 Comment/debate
  • 1 Paper
Filter
Conference contribution
2015

Cell manipulation by nodal circle resonance vibration of a cell cultivation substrate

Imashiro, C., Kurashina, Y., Takemura, K., Miyata, S. & Komotori, J., 2015 Nov 13, 2015 IEEE International Ultrasonics Symposium, IUS 2015. Institute of Electrical and Electronics Engineers Inc., 7329291

Research output: Chapter in Book/Report/Conference proceedingConference contribution

manipulators
vibration
cells
organs
vibration mode
1 Citation (Scopus)

Improvement of wear resistance of stainless steel by laser-induced local surface treatment

Ezura, A., Yoshimine, H., Ohkawa, K., Katahira, K. & Komotori, J., 2015 Oct 18, Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015. Japan Society of Mechanical Engineers

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wear resistance
Surface treatment
Stainless steel
Austenitic stainless steel
Lasers
2014
8 Citations (Scopus)

A study on PCD tool surface reconditioning technique for SiC micromachining

Takesue, S., Katahira, K. & Komotori, J., 2014, Procedia CIRP. Elsevier, Vol. 14. p. 355-359 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Micromachining
Diamonds
Machining
Surface roughness
Ultrasonic cleaning

Effect of fine-grained microstructure induced by induction-heating fine particle peening treatment on fatigue properties of structural steel (0.45%C)

Murai, K., Toyama, R., Komotori, J., Fukazawa, K., Misaka, Y. & Kawasaki, K., 2014, Advanced Materials Research. Trans Tech Publications, Vol. 891-892. p. 1482-1487 6 p. (Advanced Materials Research; vol. 891-892).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shot peening
Induction heating
Fatigue of materials
Microstructure
Steel

Proliferation and adhesion of L929 fibroblasts on surface with different microtopography

Kurashina, Y., Miyata, S., Komotori, J. & Koyama, T., 2014, Materials Research Society Symposium Proceedings. Materials Research Society, Vol. 1648.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

fibroblasts
Fibroblasts
peening
Shot peening
adhesion
2013

Durability evaluation of carbon steel AISI1045 coated diamond-like carbon film using an atmospheric controlled IH-FPP system for pretreatment

Akebono, H., Furukawa, M., Komotori, J. & Sugeta, A., 2013, WIT Transactions on Engineering Sciences. WITPress, Vol. 78. p. 227-236 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diamond like carbon films
Durability
Strombus or kite or diamond
Carbon steel
Steel
2 Citations (Scopus)

Effects of nanosecond laser fabrication on bioactivity of pure Titanium

Mizutani, M., Honda, R., Yuda, A., Komotori, J. & Ohmori, H., 2013, Procedia CIRP. Vol. 5. p. 242-246 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Bioactivity
Titanium
Fabrication
Lasers
Hydroxyapatite
2011

Effect of static pre-strain on low cycle fatigue life of AISI 316L stainless steel

Ido, T. & Komotori, J., 2011, Key Engineering Materials. Vol. 462-463. p. 65-69 5 p. (Key Engineering Materials; vol. 462-463).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stainless Steel
Stainless steel
Fatigue of materials
Hysteresis loops
Ductility
10 Citations (Scopus)

Effects of processing parameters on characteristics of surface modified layers generated by atmospheric controlled IH-FPP system

Fukuoka, T., Ujiie, Y., Komotori, J., Fukazawa, K., Misaka, Y. & Kawasaki, K., 2011, Procedia Engineering. Vol. 10. p. 1503-1508 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shot peening
Processing
Heating
Oxygen
Electrochemical cells
2010
1 Citation (Scopus)

Tribological Properties of Aluminum Alloy treated by Fine Particle Peening/DLC Hybrid Surface Modification

Amano, Y., Nanbu, H., Kameyama, Y. & Komotori, J., 2010 Jun 9, EPJ Web of Conferences. EDP Sciences, Vol. 6. 26011

Research output: Chapter in Book/Report/Conference proceedingConference contribution

peening
aluminum alloys
coefficient of friction
shot
coatings
2009

Surface finishing and modification for cobalt-chromium-molybdenum alloy by electrolytic in-process dressing (ELID) grinding

Kotani, H., Komotori, J., Mizutani, M., Naruse, T., Katahira, K. & Ohmori, H., 2009, Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Molybdenum alloys
Chromium alloys
Cobalt
Wear resistance
Corrosion resistance
2008

Assessing the biocompatibility of Ni-Ti alloy treated with thermal oxidation in vitro and in vivo

Matsumura, Y., Komotori, J. & Tamaushi, H., 2008, 8th World Biomaterials Congress 2008. Vol. 3. p. 1536 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biocompatibility
Oxidation
Hot Temperature

Development of titanium/zirconia composite by spark plasma sintering (SPS) method for artificial hip joint

Kotani, H., Saito, T., Kikuchi, S., Komotori, J., Naruse, T., Katahira, K. & Ohmori, H., 2008, Progress of Composites 2008 in Asia and Australasia - Proceedings of the 6th Asian-Australasian Conference on Composite Materials, ACCM 2008. p. 205-208 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hip prostheses
Spark plasma sintering
Titanium
Zirconia
Composite materials

Effect of fine particle peening on fatigue properties of AISI 4135 steel with different hardness

Hirota, Y., Kikuchi, S. & Komotori, J., 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 2. p. 874-881 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shot peening
Hardness
Fatigue of materials
Steel
Residual stresses

Effects of Pre-strain / Stress on corrosion behaviour of metallic biomaterials

Hisamori, N. & Komotori, J., 2008, 8th World Biomaterials Congress 2008. Vol. 3. p. 1338 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biocompatible Materials
Biomaterials
Corrosion

Fatigue properties of pre-FPP (Fine Particle Peening) treated and gas Nitrided austenitic stainless steel

Kikuchi, S., Nakahara, Y. & Komotori, J., 2008, Materials Science and Technology Conference and Exhibition, MS and T'08. Vol. 2. p. 741-752 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shot peening
Austenitic stainless steel
Gases
Fatigue of materials
Electron microscopes

Influence of PRE-FPP (fine particle peening) on fatigue fracture mechanism of nitrided AISI 4135 steel

Kikuchi, S., Lshii, K. & Komotori, J., 2008, 17th European Conference on Fracture 2008: Multilevel Approach to Fracture of Materials, Components and Structures. Vol. 1. p. 866-873 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Shot peening
Fatigue of materials
Nitriding
Steel
Stress concentration
2007
1 Citation (Scopus)

ELID grinding characteristics and surface modifying effects on precise lens mold materials

Katahira, K., Ohmori, H., Saito, T., Komotori, J. & Mizutani, M., 2007, Proceedings of the 7th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2007. euspen, Vol. 2. p. 441-444 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

grinding
wheels
Lenses
lenses
Grinding wheels

Nano-precision grinding characteristics and surface modifying effects on lens mold materials

Katahira, K., Ohmori, H., Saito, T., Komotori, J. & Mizutani, M., 2007, LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lenses
Grinding wheels
Chemical elements
Carbides
Chromium

Precision grinding of the head of artificial joint (Co-Cr alloy) with a new electrical grinding system

Mizutani, M., Hisamori, N., Mizuno, T., Ohmori, H., Katahira, K. & Komotori, J., 2007, LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Chemical stability
Biocompatibility
Biomaterials
Surface properties
Wheels
2006

Effects of ELID grinding on high temperature corrosion resistance of forming molds

Katahira, K., Ohmori, H., Uehara, Y., Nakao, A., Saito, T., Mizutani, M. & Komotori, J., 2006, Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006. euspen, Vol. 2. p. 148-151 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Molds
grinding
corrosion resistance
Corrosion resistance
Surface treatment
2005

Corrosion resistance of Ti-6Al-4V alloy finished by an advanced ELID grinding system

Mizutani, M., Komotori, J., Katahira, K. & Ohmori, H., 2005, 11th International Conference on Fracture 2005, ICF11. Vol. 3. p. 1629-1634 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

grinding
Corrosion resistance
corrosion
oxide
Oxides

Effect of size of coating defect on fatigue properties of steel thermally sprayed with Ni-based self-fluxing alloy

Nishimori, H., Akebono, H., Komotori, J. & Shimizu, M., 2005, 11th International Conference on Fracture 2005, ICF11. Vol. 4. p. 2768-2772 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

fatigue
defect
coating
steel
Fatigue of materials

Effect of surface roughness of substrate on fatigue strength of thermally sprayed steel with self-fluxing alloy

Akebono, H., Komotori, J., Shimizu, M. & Fukumoto, M., 2005, 11th International Conference on Fracture 2005, ICF11. Vol. 4. p. 2425-2430 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

fatigue
surface roughness
Surface roughness
steel
substrate

Fatigue properties of titanium alloy, stainless steel and aluminum alloy treated with Fine Particle Bombardment

Kameyama, Y., Akebono, H., Komotori, J. & Shimizu, M., 2005, 11th International Conference on Fracture 2005, ICF11. Vol. 8. p. 6081-6086 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Alloy steel
fatigue
Titanium alloys
titanium
Aluminum alloys

Grinding characteristics and surface modifying effects on ELID ground biocompatible Co-Cr alloy for artificial joint

Katahira, K., Mizutani, M., Akinou, Y., Komotori, J., Ohmori, H. & Uehara, Y., 2005, EUSPEN 2005 - Proceedings of the 5th International Conference of the European Society for Precision Engineering and Nanotechnology. euspen, p. 541-544 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

grinding
corrosion
Corrosion fatigue
Chemical stability
Biocompatible Materials

Improvement of adhesive strength of DLC film coated on metallic substrate by finishing condition selection

Katahira, K., Ohmori, H., Komotori, J., Mizutani, M., Maehama, F. & Iwaki, M., 2005, LEM 2005 - 3rd International Conference on Leading Edge Manufacturing in 21st Century. p. 219-224 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Grinding wheels
Adhesives
Wheels
Substrates
Diamonds

Surface properties of bioinaterials (Ti-6A1-4V alloy) finished by a new ELID grinding system

Mizutani, M., Komotori, J., Katahira, K. & Ohmori, H., 2005, LEM 2005 - 3rd International Conference on Leading Edge Manufacturing in 21st Century. p. 213-218 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Surface properties
Corrosion resistance
Nanohardness
Electrochemical corrosion
Electrochemical cells
2004

Color finishing of titanium alloy using a new electrical grinding technique

Katahira, K., Ohmori, H., Mizutani, M. & Komotori, J., 2004, Progress of Machining Technology - Proceedings of the Seventh International Conference on Progress of Machining Technology, ICPMT'2004. Chen, W., Yamane, Y., Fan, R. & Ochi, A. (eds.). p. 324-329 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Titanium alloys
Oxide films
Color
Light interference
Painting

Corrosion resistance and biocompatibility of stainless steel modified by ELID(Electrolytic in-process dressing) grinding

Mizutani, M., Haneda, M., Komotori, J., Katahira, K. & Ohmori, H., 2004, Transactions - 7th World Biomaterials Congress. p. 1094 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Biocompatibility
Corrosion resistance
Stainless steel
Pitting
Electrochemical corrosion

Effects of stress rates on corrosion fatigue of Ti-6A1-4V alloy

Nakajima, A., Goto, Y. & Komotori, J., 2004, Transactions - 7th World Biomaterials Congress. p. 809 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Corrosion fatigue
Electrodes
Pitting
Titanium alloys
Platinum
2001
3 Citations (Scopus)

Influence of Coating Thickness on Fatigue Properties of Sprayed Co-Based Self-Fluxing Alloy with Fusing Treatment

Oh, J., Komotori, J. & Shimizu, M., 2001, Proceedings of the International Thermal Spray Conference. Berndt, C. C., Khor, K. A. & Laguscheider, E. F. (eds.). p. 1023-1029 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fatigue of materials
Coatings
Substrates
Bending tests
Carbon steel