If you made any changes in Pure these will be visible here soon.

Research Output 1987 2019

  • 1155 Citations
  • 18 h-Index
  • 147 Article
  • 32 Conference contribution
  • 2 Comment/debate
  • 1 Paper
Filter
Article
2019
1 Citation (Scopus)

Effect of hydroxy groups and microtopography generated by a nanosecond-pulsed laser on pure Ti surfaces

Kurashina, Y., Ezura, A., Murakami, R., Mizutani, M. & Komotori, J., 2019 May 1, In : Journal of Materials Science: Materials in Medicine. 30, 5, 57.

Research output: Contribution to journalArticle

Titanium
Pulsed lasers
Lasers
Durapatite
Hydroxyapatites
1 Citation (Scopus)

Effect of pre-treatment with fine particle peening on surface properties and wear resistance of gas blow induction heating nitrided titanium alloy

Takesue, S., Kikuchi, S., Akebono, H., Misaka, Y. & Komotori, J., 2019 Feb 15, In : Surface and Coatings Technology. 359, p. 476-484 9 p.

Research output: Contribution to journalArticle

peening
induction heating
Shot peening
Induction heating
nitriding

Functionalisation of titanium alloy surface through oxygen gas jet-assisted gliding arc discharge plasma

Katahira, K., Mifune, N. & Komotori, J., 2019 Jan 1, In : CIRP Annals.

Research output: Contribution to journalArticle

Titanium alloys
Discharge (fluid mechanics)
Plasmas
Oxygen
Gases
2018
1 Citation (Scopus)

Dynamic recrystallization of Fe-Cr alloys by atmospheric-controlled induction-heating fine particle peening

Kikuchi, S., Tanaka, I., Takesue, S., Komotori, J. & Matsumoto, K., 2018 Jun 25, In : Surface and Coatings Technology. 344, p. 410-417 8 p.

Research output: Contribution to journalArticle

peening
induction heating
Shot peening
Induction heating
Dynamic recrystallization
9 Citations (Scopus)

Effect of atmospheric-controlled induction-heating fine particle peening on electrochemical characteristics of austenitic stainless steel

Kikuchi, S., Iwamae, S., Akebono, H., Komotori, J. & Kadota, K., 2018 Jan 25, In : Surface and Coatings Technology. 334, p. 189-195 7 p.

Research output: Contribution to journalArticle

peening
induction heating
Shot peening
Induction heating
austenitic stainless steels

Effect of Cr diffused layer formed by AIH-FPP treatment on adhesion of DLC films to a carbon steel substrate

Takesue, S., Akebono, H., Furukawa, M., Kikuchi, S., Komotori, J. & Nomura, H., 2018 Jan 1, In : Materials Transactions. 59, 4, p. 642-647 6 p.

Research output: Contribution to journalArticle

peening
induction heating
Diamond like carbon films
Shot peening
Induction heating
2 Citations (Scopus)

Formation of titanium/zirconia based biomaterial fabricated by spark plasma sintering

Kikuchi, S., Katahira, K. & Komotori, J., 2018 Jan 1, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 82, 9, p. 341-348 8 p.

Research output: Contribution to journalArticle

Spark plasma sintering
Biocompatible Materials
sparks
Titanium
Biomaterials
3 Citations (Scopus)

Improvement of the electrochemical characteristics of medium carbon steel using atmospheric-controlled induction-heating fine particle peening

Kikuchi, S., Iwamae, S., Akebono, H., Komotori, J. & Misaka, Y., 2018 Nov 25, In : Surface and Coatings Technology. 354, p. 76-82 7 p.

Research output: Contribution to journalArticle

peening
induction heating
Shot peening
Induction heating
carbon steels
3 Citations (Scopus)

Rapid surface nitriding of titanium alloy by a nanosecond fiber laser under atmospheric conditions

Katahira, K., Tanida, Y., Takesue, S. & Komotori, J., 2018 Jan 1, (Accepted/In press) In : CIRP Annals.

Research output: Contribution to journalArticle

Nitriding
Fiber lasers
Titanium alloys
Heat affected zone
Needles
1 Citation (Scopus)

Surface properties of intermetallic compound layer formed on titanium alloy by AIH-FPP (Atmospheric controlled induction heating fine particle peening) treatment+1

Takesue, S., Saito, S., Komotori, J., Misaka, Y. & Kawasaki, K., 2018 Jan 1, In : Materials Transactions. 59, 9, p. 1452-1457 6 p.

Research output: Contribution to journalArticle

peening
induction heating
Shot peening
Induction heating
titanium alloys
2017

Cover Image, Volume 114, Number 10, October 2017

Kurashina, Y., Hirano, M., Imashiro, C., Totani, K., Komotori, J. & Takemura, K., 2017 Oct 1, In : Biotechnology and Bioengineering. 114, 10, p. i

Research output: Contribution to journalArticle

Vibration
Vibrations (mechanical)
Enzymes
Modulation
Temperature

Effect of cooling stimulus on collection efficiency of calf chondrocytes cultivated on metal surface

Kurashina, Y., Miyata, S. & Komotori, J., 2017 Nov 1, In : International Journal of Automation Technology. 11, 6, p. 925-931 7 p., ijate001100060925.

Research output: Contribution to journalArticle

Cooling
Metals
Fluorescence microscopy
Cell proliferation
Substrates

Effect of Cr diffused layer formed by AIH-FPP on adhesion strength of DLC films

Takesue, S., Akebono, H., Furukawa, M., Kikuchi, S., Komotori, J. & Nomura, H., 2017, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 81, 7, p. 352-357 6 p.

Research output: Contribution to journalArticle

peening
induction heating
Diamond like carbon films
Shot peening
Induction heating

Effects of gas blow velocity on the surface properties of Ti-6Al-4V alloy treated by gas blow IH nitriding

Takesue, S., Kikuchi, S., Akebono, H., Komotori, J., Fukazawa, K. & Misaka, Y., 2017, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 81, 5, p. 288-293 6 p.

Research output: Contribution to journalArticle

induction heating
Induction heating
nitriding
Nitriding
surface properties
4 Citations (Scopus)

Effects of gas blow velocity on the surface properties of Ti-6Al-4V alloy treated by gas blow IH nitriding

Takesue, S., Kikuchi, S., Akebono, H., Komotori, J., Fukazawa, K. & Misaka, Y., 2017, In : Materials Transactions. 58, 8, p. 1155-1160 6 p.

Research output: Contribution to journalArticle

induction heating
Induction heating
nitriding
Nitriding
surface properties
11 Citations (Scopus)

Efficient Subculture Process for Adherent Cells by Selective Collection Using Cultivation Substrate Vibration

Kurashina, Y., Takemura, K., Friend, J., Miyata, S. & Komotori, J., 2017 Mar 1, In : IEEE Transactions on Biomedical Engineering. 64, 3, p. 580-587 8 p., 7469399.

Research output: Contribution to journalArticle

Substrates
Ethylenediaminetetraacetic acid
Cell culture
8 Citations (Scopus)

Enzyme-free cell detachment mediated by resonance vibration with temperature modulation

Kurashina, Y., Hirano, M., Imashiro, C., Totani, K., Komotori, J. & Takemura, K., 2017, (Accepted/In press) In : Biotechnology and Bioengineering.

Research output: Contribution to journalArticle

Vibration
Cell culture
Vibrations (mechanical)
Enzymes
Modulation
2 Citations (Scopus)

Experimental investigation of machinability and surface quality of sapphire machined with polycrystalline diamond micro-milling tool

Katahira, K., Matsumoto, Y., Komotori, J. & Yamazaki, K., 2017 Aug 7, (Accepted/In press) In : International Journal of Advanced Manufacturing Technology. p. 1-10 10 p.

Research output: Contribution to journalArticle

Machinability
Milling (machining)
Sapphire
Surface properties
Diamonds

Formation of a TiAl3 layer by an AIH-FPP treatment using mechanically milled particles and its wear resistance

Saito, S., Takesue, S., Komotori, J., Fukazawa, K. & Misaka, Y., 2017, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 81, 6, p. 295-300 6 p.

Research output: Contribution to journalArticle

peening
induction heating
Shot peening
Induction heating
wear resistance
1 Citation (Scopus)

Generation of biocompatible TiO2 layer using atmospheric pressure plasma-assisted fine particle peening

Katahira, K., Mifune, N. & Komotori, J., 2017, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journalArticle

Shot peening
Atmospheric pressure
Plasmas
Plasma jets
Biocompatibility
2 Citations (Scopus)
peening
shot peening
Shot peening
Grain refinement
residual stress

Surface modification of stainless steel by laser-induced wet treatment in aluminum nitrate solution

Ezura, A., Yoshimine, H., Katahira, K. & Komotori, J., 2017, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 83, 1, p. 72-77 6 p.

Research output: Contribution to journalArticle

Surface treatment
Nitrates
Stainless steel
Aluminum
Lasers
2016
5 Citations (Scopus)

Bone and gingival connective tissue responses towards nanosecond-pulsed laser-treated titanium implants

Fukayo, Y., Amemiya, T., Nakaoka, K., Mizutani, M., Komotori, J., Hamada, Y. & Hayakawa, T., 2016 Apr 12, In : Journal of Hard Tissue Biology. 25, 2, p. 181-194 14 p.

Research output: Contribution to journalArticle

Titanium
Pulsed lasers
Connective Tissue
Bone
Lasers
8 Citations (Scopus)
peening
Shot peening
Oxidation
oxidation
Oxides
2 Citations (Scopus)

Formation of a Ni-Al intermetallic compound layer by AIH-FPP treatment

Saito, S., Suzuki, K., Komotori, J., Fukazawa, K., Misaka, Y. & Kawasaki, K., 2016, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 80, 9, p. 562-569 8 p.

Research output: Contribution to journalArticle

peening
induction heating
Shot peening
Induction heating
Aluminum
7 Citations (Scopus)

Formation of nitrided layer using atmospheric-controlled IH-FPP and its effect on the fatigue properties of Ti-6Al-4V alloy under four-point bending

Kikuchi, S., Ota, S., Akebono, H., Omiya, M., Komotori, J., Sugeta, A. & Nakai, Y., 2016 Jan 1, In : Procedia Structural Integrity. 2, p. 3432-3438 7 p.

Research output: Contribution to journalArticle

Open Access
Shot peening
Induction heating
Fatigue of materials
Nitrogen
Nitrogen Compounds
6 Citations (Scopus)

Generation of bio-compatible titanium alloy surfaces by laser-induced wet treatment

Katahira, K., Ezura, A., Ohkawa, K., Komotori, J. & Ohmori, H., 2016, (Accepted/In press) In : CIRP Annals - Manufacturing Technology.

Research output: Contribution to journalArticle

Titanium alloys
Calcium
Biocompatibility
Lasers
Nitrates
2 Citations (Scopus)

Improvement in wear resistance of stainless steel by laser-induced local surface treatment

Ezura, A., Yoshimine, H., Ohkawa, K., Katahira, K. & Komotori, J., 2016, In : Journal of Advanced Mechanical Design, Systems and Manufacturing. 10, 5

Research output: Contribution to journalArticle

Wear resistance
Surface treatment
Stainless steel
Austenitic stainless steel
Lasers
7 Citations (Scopus)

Surface modification of carbon steel by atmospheric-controlled IH-FPP treatment using mixed chromium and high-speed steel particles

Ota, S., Akebono, H., Kikuchi, S., Murai, K., Komotori, J., Fukazawa, K., Misaka, Y. & Kawasaki, K., 2016, In : Materials Transactions. 57, 10, p. 1801-1806 6 p.

Research output: Contribution to journalArticle

Steel
carbon steels
Chromium
Carbon steel
Surface treatment
2015
18 Citations (Scopus)

Effect of atmospheric-pressure plasma jet on polycrystalline diamond micro-milling of silicon carbide

Katahira, K., Ohmori, H., Takesue, S., Komotori, J. & Yamazaki, K., 2015, In : CIRP Annals - Manufacturing Technology. 64, 1, p. 129-132 4 p.

Research output: Contribution to journalArticle

Plasma jets
Silicon carbide
Atmospheric pressure
Diamonds
Hydrophilicity
1 Citation (Scopus)
phenotype
Cartilage
stimuli
shear stress
cartilage
14 Citations (Scopus)
peening
Shot peening
nitriding
Steel
Nitriding

High functionalization of dental implant with laser fabrication

Mizutani, M., Komotori, J., Hayakawa, T., Xu, S., Shimada, K. & Kuriyagawa, T., 2015, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 81, 12, p. 1073-1077 5 p.

Research output: Contribution to journalArticle

Dental prostheses
Bioactivity
Surface treatment
Titanium
Fabrication
1 Citation (Scopus)

Inhibitory function of NKT cells during early induction phase of nickel allergy

Okuno, H., Satoh, M., Takeuchi, E., Eshima, K., Terashima, M., Komotori, J., Habu, S., Tamauchi, H. & Iwabuchi, K., 2015 Dec 2, (Accepted/In press) In : Immunobiology.

Research output: Contribution to journalArticle

Natural Killer T-Cells
Nickel
Hypersensitivity
Metals
Ear
6 Citations (Scopus)

Investigation and application of Fe-Al intermetallic compound formed by atmospheric-controlled IH-FPP

Kameyama, Y., Takeshima, H., Komotori, J. & Murasawa, K., 2015 Sep 1, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 79, 9, p. 452-460 9 p.

Research output: Contribution to journalArticle

Intermetallics
intermetallics
Steel
Substrates
steels
1 Citation (Scopus)

Surface modification by ELID-method

Ohmori, H., Katahira, K., Mizutani, M. & Komotori, J., 2015, In : Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering. 81, 12, p. 1067-1072 6 p.

Research output: Contribution to journalArticle

Biomaterials
Surface properties
Surface treatment
2 Citations (Scopus)

Surface modification of carbon steel by vacuum AIH-FPP treatment using mixed shot particles of chromium and high speed steel

Ota, S., Murai, K., Komotori, J., Fukazawa, K., Misaka, Y. & Kawasaki, K., 2015 Oct 1, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 79, 10, p. 491-496 6 p.

Research output: Contribution to journalArticle

peening
induction heating
Shot peening
Induction heating
Steel
2014
9 Citations (Scopus)

Effective cell collection method using collagenase and ultrasonic vibration

Kurashina, Y., Takemura, K., Miyata, S., Komotori, J. & Koyama, T., 2014 Oct 1, In : Biomicrofluidics. 8, 5, 1.4899054.

Research output: Contribution to journalArticle

Collagenases
Vibrations (mechanical)
ultrasonics
Ultrasonics
Cell culture
10 Citations (Scopus)

Effects of fine particle peening on oxidation behavior of nickeltitanium shape memory alloy

Kikuchi, S., Kameyama, Y., Mizutani, M. & Komotori, J., 2014, In : Materials Transactions. 55, 1, p. 176-181 6 p.

Research output: Contribution to journalArticle

peening
Shot peening
shape memory alloys
Shape memory effect
Oxidation
5 Citations (Scopus)
Silicon carbide
Diamonds
Machining
Surface properties
Chemical vapor deposition

Proliferation and adhesion of L929 fibroblasts on surface with different microtopography

Kurashina, Y., Miyata, S., Komotori, J. & Koyama, T., 2014 Nov 17, In : Prehospital and Disaster Medicine. 1648, 4

Research output: Contribution to journalArticle

Aluminum Oxide
Fibroblasts
Cell Adhesion
Cell Count
Cell Proliferation
9 Citations (Scopus)

Proliferation of calf chondrocyte on stainless-steel surfaces with different microtopography

Kurashina, Y., Hamano, T., Miyata, S., Komotori, J. & Koyama, T., 2014, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 78, 4, p. 170-176 7 p.

Research output: Contribution to journalArticle

calves
Stainless Steel
stainless steels
Stainless steel
peening
2013

Cell compatibility of Co-Cr-Mo alloy treated with electrolytic in-process dressing grinding/thermal oxidation hybrid process

Hiraga, I., Hamada, M., Komotori, J. & Mizutani, M., 2013, In : International Journal of Nanomanufacturing. 9, 5-6, p. 486-495 10 p.

Research output: Contribution to journalArticle

Oxidation
Cobalt
Surface roughness
Hip prostheses
Glow discharges
2 Citations (Scopus)

Development of a new grinding system for finishing of hemispherical inside surface

Kotani, H., Komotori, J., Naruse, T., Mizutani, M., Katahira, K., Ohmori, H., Wasa, M. & Sumiya, K., 2013, In : International Journal of Nanomanufacturing. 9, 1, p. 77-86 10 p.

Research output: Contribution to journalArticle

Hip prostheses
Grinding mills
Metals
Abrasives
Stainless steel
10 Citations (Scopus)

Improved cytocompatibility of nanosecond-pulsed laser-treated commercially pure Ti surfaces

Mizutani, M., Honda, R., Kurashina, Y., Komotori, J. & Ohmori, H., 2013, In : International Journal of Automation Technology. 8, 1, p. 102-109 8 p.

Research output: Contribution to journalArticle

Pulsed lasers
Lasers
Osteoblasts
Bone
Cell proliferation
18 Citations (Scopus)

Increasing surface hardness of AISI 1045 steel by AIH-FPP/plasma nitriding treatment

Kikuchi, S., Fukuoka, T., Sasaki, T., Komotori, J., Fukazawa, K., Misaka, Y. & Kawasaki, K., 2013, In : Materials Transactions. 54, 3, p. 344-349 6 p.

Research output: Contribution to journalArticle

peening
induction heating
Shot peening
Induction heating
nitriding
5 Citations (Scopus)

Metal suicide on the steel substrate formed by atmospheric controlled IH-FPP (AIH-FPP) nd its effect on corrosion resistance improvement

Kameyama, Y., Amano, Y., Komotori, J., Fukazawa, K., Misaka, Y. & Kawasaki, K., 2013 Jan, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 77, 1, p. 7-13 7 p.

Research output: Contribution to journalArticle

Steel
corrosion resistance
Corrosion resistance
Metals
steels
2012
8 Citations (Scopus)

Effects of FPP/gas nitriding hybrid surface treatment on fatigue properties of austenitic stainless steel (SUS316)

Kikuchi, S., Nakahara, Y., Dobashi, K. & Komotori, J., 2012 Aug, In : Zairyo/Journal of the Society of Materials Science, Japan. 61, 8, p. 680-685 6 p.

Research output: Contribution to journalArticle

peening
Shot peening
nitriding
austenitic stainless steels
Nitriding
7 Citations (Scopus)

Increasing surface hardness of S45C steel by AIH-FPP/Gaseous nitriding treatment

Fukuoka, T., Kikuchi, S., Komotori, J., Fukazawa, K., Misaka, Y. & Kawasaki, K., 2012 Jul, In : Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 76, 7, p. 422-428 7 p.

Research output: Contribution to journalArticle

peening
induction heating
Shot peening
Induction heating
nitriding
6 Citations (Scopus)
peening
induction heating
Shot peening
Induction heating
Steel