• 92 Citations
  • 5 h-Index
20002019

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 92 Citations
  • 5 h-Index
  • 24 Conference contribution
  • 20 Article
  • 1 Paper
  • 1 Conference article
Filter
Conference contribution
2019

Quantifying Sense of Depth Towards Visual Texture Using Optics Simulation

Shimomura, M., Kamesaka, R., Nishihara, M., Matsuoka, K., Yoshimura, T., Kato, T. & Matsuoka, Y., 2019 Jan 1, Human Systems Engineering and Design - Proceedings of the 1st International Conference on Human Systems Engineering and Design IHSED2018: Future Trends and Applications. Ahram, T., Taiar, R. & Karwowski, W. (eds.). Springer Verlag, p. 491-497 7 p. (Advances in Intelligent Systems and Computing; vol. 876).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Comparative analysis of research for industrial design and engineering design based on multispace design model

Sakae, Y., Mukai, S., Sato, K. & Matsuoka, Y., 2018 Jan 1, 15th International Design Conference, DESIGN 2018. Bojcetic, N., Pavkovic, N., Marjanovic, D., Storga, M. & Skec, S. (eds.). Faculty of Mechanical Engineering and Naval Architecture, Vol. 1. p. 81-90 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

Quality function deployment using improved interpretive structural modeling

Kato, T. & Matsuoka, Y., 2014 Jan 1, Human Interface and the Management of Information: Information and Knowledge Design and Evaluation - 16th International Conference, HCI International 2014, Proceedings. PART 1 ed. Springer Verlag, p. 352-363 12 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 8521 LNCS, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Timeaxis design of a service system growing values of mobility using the m-v model

Kamiya, K., Kito, A., Alvarez, J., Sato, K., Nishimura, H., Matsuoka, Y. & Furugori, S., 2014, Design, User Experience, and Usability: User Experience Design for Everyday Life Applications and Services - Third International Conference, DUXU 2014, Held as Part of HCI International 2014, Proc.. PART 3 ed. Springer Verlag, p. 281-292 12 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 8519 LNCS, no. PART 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2013

Emergent design system using computer-human interactions and serendipity

Kito, A., Mizumachi, Y., Sato, K. & Matsuoka, Y., 2013, ACHI 2013 - 6th International Conference on Advances in Computer-Human Interactions. International Academy, Research and Industry Association, IARIA, p. 7-12 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2012

Modification method by increasing and decreasing elements in the emergent design system

Kito, A., Mizumachi, Y., Sekiguchi, M., Sato, K. & Matsuoka, Y., 2012 Jan 1, Equipment Manufacturing Technology. p. 807-810 4 p. (Advanced Materials Research; vol. 422).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Self-organizing system for deriving diverse solutions based on concept of emergence

Sato, K. & Matsuoka, Y., 2012 Dec 1, Proceeding - 2012 IEEE International Conference on Computational Intelligence and Cybernetics, CyberneticsCom 2012. p. 11-15 5 p. 6381607. (Proceeding - 2012 IEEE International Conference on Computational Intelligence and Cybernetics, CyberneticsCom 2012).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2011

Application to a car body frame based on parameter guidelines for deriving diverse solutions using emergent design system

Sato, K. & Matsuoka, Y., 2011 Dec 1, ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design. PART 2 ed. p. 11-23 13 p. (ICED 11 - 18th International Conference on Engineering Design - Impacting Society Through Engineering Design; vol. 10, no. PART 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

A proposal of robust design method for deriving adjustable range

Kimura, S., Kato, T. & Matsuoka, Y., 2011 Sep 26, Advanced Materials and Processes. p. 2332-2335 4 p. (Advanced Materials Research; vol. 311-313).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Mathematical consideration on a robustness index for adjustable control factors

Kato, T., Kimura, S. & Matsuoka, Y., 2011 Dec 9, Product Design and Manufacturing. p. 26-29 4 p. (Advanced Materials Research; vol. 338).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Research on the role of the sketch in design idea generation

Izu, Y., Sato, K. & Matsuoka, Y., 2011 Jul 21, HCI International 2011 - Posters' Extended Abstracts - International Conference, HCI International 2011, Proceedings. PART 1 ed. p. 29-32 4 p. (Communications in Computer and Information Science; vol. 173 CCIS, no. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2010

A extended algorithm for generation of fibrous form in the emergent design system

Sato, K., Ujiie, Y. & Matsuoka, Y., 2010 Jun 25, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART A ed. p. 473-480 8 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009; vol. 2, no. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Emergent design of dynamical behavior

Nagata, T., Takemura, K., Sato, K. & Matsuoka, Y., 2010 Dec 1, 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM 2010. p. 373-378 6 p. 5695749. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Robust design method for diverse conditions

Watai, A., Nakatsuka, S., Kato, T., Ujiie, Y. & Matsuoka, Y., 2010 Jun 25, Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009. PART B ed. p. 1131-1138 8 p. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009; vol. 8, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2009

Application of an emergent design system to artificial hip stem and body in white

Sato, K., Ujiie, Y. & Matsuoka, Y., 2009 Nov 23, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART A ed. p. 753-760 8 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; vol. 3, no. PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Diverse shape generation for digital style design

Ujiie, Y. & Matsuoka, Y., 2009 Nov 23, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART B ed. p. 779-784 6 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; vol. 3, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mathematical formulation of macroscopic feature for digital style design

Kawanishi, S., Ujiie, Y., Matsunaga, E. & Matsuoka, Y., 2009 Nov 23, 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART B ed. p. 785-789 5 p. (2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008; vol. 3, no. PART B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2008

Application of an emergent design system to artificial hip stem and Body in White

Sato, K., Ujiie, Y. & Matsuoka, Y., 2008 Dec 1, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. PARTS A AND B ed. p. 753-760 8 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 3, no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Application to artificial hip stem design of an emergent design system applicable in the early process of design

Sato, K., Ujiie, Y. & Matsuoka, Y., 2008 Sep 19, Proceedings - The 2nd IEEE International Conference on Secure System Integration and Reliability Improvement, SSIRI 2008. p. 179-180 2 p. 4579813. (Proceedings - The 2nd IEEE International Conference on Secure System Integration and Reliability Improvement, SSIRI 2008).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A proposal of classification and guideline of selection for design modeling methods

Asanuma, T., Kawashima, J., Ujiie, Y. & Matsuoka, Y., 2008 Jun 13, 2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007. p. 551-558 8 p. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007; vol. 2 PART A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Diverse shape generation for digital style design

Ujiie, Y. & Matsuoka, Y., 2008 Dec 1, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. PARTS A AND B ed. p. 779-784 6 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 3, no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mathematical formulation of macroscopic feature for digital style design

Kawanishi, S., Matsunaga, E., Ujiie, Y. & Matsuoka, Y., 2008 Dec 1, ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. PARTS A AND B ed. p. 785-789 5 p. (Proceedings of the ASME Design Engineering Technical Conference; vol. 3, no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2007

A design method that integrates the early and late process of design

Nomura, Y., Ujiie, Y. & Matsuoka, Y., 2007 Dec 1, Proceedings of ICED 2007, the 16th International Conference on Engineering Design. (Proceedings of ICED 2007, the 16th International Conference on Engineering Design; vol. DS 42).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)
2002

Macroscopic shape-information as a curve design-guideline

Ujiie, Y. & Matsuoka, Y., 2002, ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2002. p. 327-336 10 p. (ASME 2002 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2002; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution