Find Research outputs

Search results

• Paper

  Accuracy improvement of GPS positioning in urban area

  Yamaguchi, S. & Tanaka, T., 2005 Dec 1, p. 2611-2614. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• Accuracy of relative distance measurement with ultra wideband system

  Shimizu, Y. & Sanada, Y., 2003 Jan 1, p. 374-378. 5 p.

  Research output: Contribution to conference › Paper › peer-review
  27 Citations (Scopus)

• Accurate extraction and measurement of fine cracks from concrete block surface image

  Ito, A., Aoki, Y. & Hashimoto, S., 2002 Dec 1, p. 2202-2207. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  98 Citations (Scopus)

• Accurate pulse timing control between independent two mode-locked lasers with a novel phase-locked loop

  Nagaoka, H., Miura, T., Takasago, K., Kannari, F., Torizuka, K. & Washio, M., 2001 Dec 1, p. II190-II191.

  Research output: Contribution to conference › Paper › peer-review

• ACE: A software framework for autonomic appliances computing

  Aoki, S., Kirihara, Y., Nakanishi, K., Iwaya, A. & Tokuda, H., 2003 Aug 18, p. 190-191. 2 p.

  Research output: Contribution to conference › Paper › peer-review
  3 Citations (Scopus)

• A CMOS impulse radio Ultra-Wideband transceiver for IMb/s data communications and ±2.5cm range findings

  Terada, T., Yoshizumi, S., Sanada, Y. & Kuroda, T., 2005 Dec 1, p. 30-33. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  24 Citations (Scopus)

• A comparative study of feedback active noise control for low frequency noise

  Nishida, T., Sakamoto, K., Inoue, T. & Adachi, S., 2013 Jan 1, p. 725-726. 2 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• A comparative study on micro machining of super fine grain tungsten carbide by various micro PCD ball end-milling tools

  Ogawa, Y., Katahira, K., Shimada, H., Yamazaki, K. & Aoyama, H., 2018.

  Research output: Contribution to conference › Paper › peer-review

• A comprehension-based database language and its distributed execution

  Kato, K., Masuda, T. & Kiyoki, Y., 1990 Dec 1, p. 442-449. 8 p.

  Research output: Contribution to conference › Paper › peer-review
  4 Citations (Scopus)

• A computational study of unsteady laminar premixed methane/air flames with composition oscillations

  Miyamae, S., Lee, B. J., Im, H. G. & Ueda, T., 2015 Jan 1.

  Research output: Contribution to conference › Paper › peer-review

• A constructive approach for developing interactive humanoid robots

  Kanda, T., Ishiguro, H., Imai, M., Ono, T. & Mase, K., 2002 Jan 1, p. 1265-1270. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  55 Citations (Scopus)

• A continuation-based analysis of contrastive wa in Japanese

  Hirayama, H., 2019, p. 405-413. 9 p.

  Research output: Contribution to conference › Paper › peer-review

• A controller design method based on functionality

  Tsuji, T., Ohnishi, K. & Sabanovic, A., 2006 Nov 21, p. 171-176. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  26 Citations (Scopus)

• A controller design method on decentralized systems

  Uchimura, Y., Yakoh, T. & Ohnishi, K., 2004 Dec 1, p. 2961-2966. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  10 Citations (Scopus)

• A control of biped robot which applies inverted pendulum mode with virtual supporting point

  Tsuji, T. & Ohnishi, K., 2002 Dec 1, p. 478-483. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  49 Citations (Scopus)

• A control strategy of null space motion using passivity of PID controller

  Shibata, T. & Murakami, T., 2006 Nov 21, p. 183-188. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  3 Citations (Scopus)

• A cost effective and sustainable relief material supply visibility system for devastated areas

  Suzuki, S., Sato, Y., Yokoishi, T. & Mitsugi, J., 2014, p. 271-276. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Acoustic diagnosis of generator engines with stationarity test derived from the fluctuation-dissipation principle

  Honda, S. & Yonekura, H., 2013 Jan 1, p. 57-58. 2 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Active noise control system for automobiles based on adaptive and robust control

  Adachi, S. & Sano, H., 1998 Dec 1, p. 1125-1129. 5 p.

  Research output: Contribution to conference › Paper › peer-review
  13 Citations (Scopus)

• Active optical waveguide sensor based on Co-polymer matrix membrane for determination of Ca⁺⁺

  Kang, S. W., Park, L. S., Kim, K. H., Minamitani, H. & Suzuki, K., 1995 Dec 1, p. 783-785. 3 p.

  Research output: Contribution to conference › Paper › peer-review

• Activity recognition based on array sensor

  Ohtsuki, T. & Hong, J., 2011 Dec 1, p. 113-117. 5 p.

  Research output: Contribution to conference › Paper › peer-review

• Acylation of oligo and polysaccharides by green process and the evaluation of surface properties

  Kimura, S., Toshima, K. & Matsumura, S., 2005 Dec 1, p. 5308-5309. 2 p.

  Research output: Contribution to conference › Paper › peer-review

• Adaptation of neural agent in dynamic environment: Hybrid system of genetic algorithm and neural network

  Iba, T. & Takefuji, Y., 1998 Dec 1, p. 575-584. 10 p.

  Research output: Contribution to conference › Paper › peer-review
  9 Citations (Scopus)

• Adaptive cruise control in consideration of trade-off between following capability to a leading vehicle and reduction of fuel consumption

  Mikami, Y., Takahashi, M. & Nishimura, H., 2010 Aug 16.

  Research output: Contribution to conference › Paper › peer-review

• Adaptive delay-based geocast protocol for data dissemination in urban VANET

  Akamatsu, R., Suzuki, M., Okamoto, T., Hara, K. & Shigeno, H., 2014 Jan 1, p. 141-146. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  26 Citations (Scopus)

• Adaptive feedforward control algorithms for active vibration control of tall structures

  Yamamoto, K., Yamamoto, T., Ohmori, H. & Sano, A., 1997 Dec 1, p. 736-742. 7 p.

  Research output: Contribution to conference › Paper › peer-review
  6 Citations (Scopus)

• Adaptive-gain alpha-beta tracker combined with circular prediction for maneuvering target tracking

  Kawase, T., Tsurunosono, H., Ehara, N. & Sasase, I., 1997 Dec 1, p. 795-798. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  9 Citations (Scopus)

• Added Pilot Semi-Blind Iterative Channel Estimation for OFDM Packet Transmission

  Ohkubo, N. & Ohtsuki, T., 2003 Dec 1, p. 878-882. 5 p.

  Research output: Contribution to conference › Paper › peer-review
  9 Citations (Scopus)

• A decentralized real-time control for biped robot

  Suzuki, J., Ito, D., Kageyama, T., Morisawa, M. & Ohnishi, K., 2002 Dec 1, p. 69-73. 5 p.

  Research output: Contribution to conference › Paper › peer-review
  8 Citations (Scopus)

• A design of robust face identification system for environmental changing

  Takimoto, H., Akamatsu, N., Mitsukura, Y. & Pedrycz, W., 2004 Sep 29, p. 858-861. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• A Design of the Object Detection System Using the RGA

  Yoshimori, S., Mitsukura, Y., Fukumi, M. & Akamatsu, N., 2003 Sep 24, p. 1227-1231. 5 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• A design of the persistent operating system with non-volatile memory

  Ohmura, R., Yamasaki, N. & Anzai, Y., 2002, p. 149-152. 4 p.

  Research output: Contribution to conference › Paper › peer-review

• A detection method of face regions in color images by using evolutionally computation

  Mitsukura, Y., Fukumi, M. & Akamatsu, N., 2001 Jan 1, p. 2253-2257. 5 p.

  Research output: Contribution to conference › Paper › peer-review

• A developmental study on two dimensional laser scale system for high precision machine tool system

  Fujimori, T., Taniguchi, K., Ellis, C., Yamazaki, K. & Aoyama, T., 2011 Dec 1.

  Research output: Contribution to conference › Paper › peer-review

• Advanced ATM switching system line interface hardware technologies based on MCM-D integrated with ASIC and S-RAMS

  Yamanaka, N., Kawamura, T. & Kaizu, K., 1997 Jan 1, p. 286-289. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• Advanced MCM-D micro-processor module for ATM wide-area network switching systems

  Kawamura, T., Yamanaka, N., Kaizu, K., Harada, A. & Yashiro, Z., 1998 Jan 1, p. 21-26. 6 p.

  Research output: Contribution to conference › Paper › peer-review

• Advanced motion control by multi-sensor based disturbance observer

  Irie, K., Katsura, S. & Ohishi, K., 2006 Nov 21, p. 200-205. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  5 Citations (Scopus)

• Advanced motion control in robotics

  Ohnishi, K. & Murakami, T., 1989 Dec 1, p. 356-359. 4 p.

  Research output: Contribution to conference › Paper › peer-review
  46 Citations (Scopus)

• Advances in visible light communication technologies

  Haruyama, S., 2012 Dec 1.

  Research output: Contribution to conference › Paper › peer-review
  10 Citations (Scopus)

• A dynamic hybrid control of biped robot in supporting area

  Morisawa, M. & Ohnishi, K., 2004 Jul 12, p. 381-386. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• A face recognition system for automated door opening with parallel health status validation using the kinect v2

  Ogawa, A., Mita, A., Georgoulas, C. & Bock, T., 2016, p. 132-140. 9 p.

  Research output: Contribution to conference › Paper › peer-review

  Open Access
  2 Citations (Scopus)

• A Feature Extraction of the EEG during Listening to the Music Using the Factor Analysis and Neural Networks

  Ito, S. I., Mitsukura, Y., Fukumi, M. & Akamatsu, N., 2003 Sep 24, p. 2263-2267. 5 p.

  Research output: Contribution to conference › Paper › peer-review
  10 Citations (Scopus)

• Affinity control of immobilized metal ligands with proteins using thermoresponsive nanogel-like interfaces

  Kikuchi, A., Endo, T., Kobayashi, J., Kanazawa, H., Sakai, K. & Okano, T., 2005 Dec 1, p. 4719-4720. 2 p.

  Research output: Contribution to conference › Paper › peer-review

• Affinity discrimination of DNA on SPR sensor using oligolysine-immobilized particle

  Umehara, K., Toshima, K. & Kawaguchi, H., 2006 Oct 19. 1 p.

  Research output: Contribution to conference › Paper › peer-review

• A field study of relationship between thermal environment, productivity and energy consumption in an office

  Tawada, T., Ikaga, T., Murakami, S., Kameda, K. I. & Ueda, H., 2009.

  Research output: Contribution to conference › Paper › peer-review
  2 Citations (Scopus)

• A fully pipelined FPGA architecture for stochastic simulation of chemical systems

  Thomas, D. B. & Amano, H., 2013.

  Research output: Contribution to conference › Paper › peer-review
  4 Citations (Scopus)

• Age differences in behavioral and visual characteristics while driving with narrow road driving assistance system

  Sato, T., Kawashima, H. & Daimon, T., 2004, p. 477-482. 6 p.

  Research output: Contribution to conference › Paper › peer-review
  1 Citation (Scopus)

• Agent-based simulation of local electricity sharing system: Can we charge all EVs in a city only with the PVs?

  Yamagata, Y., Seya, H. & Kuroda, S., 2013.

  Research output: Contribution to conference › Paper › peer-review
  3 Citations (Scopus)

• A geographical display system of disaster information based on augmented reality

  Hayashi, K., Kato, H. & Nishida, S., 2004 Dec 1, p. 2379-2383. 5 p.

  Research output: Contribution to conference › Paper › peer-review

• Agile and precise attitude switching maneuver of flexible spacecraft based on nonstationary frequency-shaped robust control

  Ikeda, R. & Takahashi, M., 2010 Aug 16.

  Research output: Contribution to conference › Paper › peer-review