A filter design method in disturbance observer for improvement of robustness against disturbance in time delay system

Eiichi Saito, Seiichiro Katsura

Research output: Chapter in Book/Report/Conference proceedingConference contribution

8 Citations (Scopus)

Abstract

Control of time delay system has been researched for a long time. In time delay system, feedback including time delay sometimes makes transient response of a system worse. In the worst case, the system becomes unstable. As time delay compensation method, various methods have been proposed, for example, smith predictor, communication disturbance observer, and so on. In particular, communication disturbance observer is superior than smith predictor in terms of no using a time delay model. However, if an error in plant model exists or disturbance is applied to the system, steady-state error occurs. As disturbance rejection method, communication disturbance observer with an disturbance observer and an integrator in outer loop was proposed in conventional research. But using this method, time delay compensation and disturbance rejection can not be designed independently. Therefore, in this paper, an integrator is not used and two degrees of freedom control is conducted by communication disturbance observer and disturbance observer. For eliminating disturbance, a novel filter design method is proposed. Using proposed filter, the effect of disturbance is suppressed. Finally, the validity of the proposed method is verified by simulation results.

Original languageEnglish
Title of host publicationIEEE International Symposium on Industrial Electronics
Pages1650-1655
Number of pages6
DOIs
Publication statusPublished - 2012
Event21st IEEE International Symposium on Industrial Electronics, ISIE 2012 - Hangzhou, China
Duration: 2012 May 282012 May 31

Other

Other21st IEEE International Symposium on Industrial Electronics, ISIE 2012
CountryChina
CityHangzhou
Period12/5/2812/5/31

Fingerprint

Time delay
Disturbance rejection
Communication
Transient analysis
Feedback
Compensation and Redress

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Control and Systems Engineering

Cite this

A filter design method in disturbance observer for improvement of robustness against disturbance in time delay system. / Saito, Eiichi; Katsura, Seiichiro.

IEEE International Symposium on Industrial Electronics. 2012. p. 1650-1655 6237338.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Saito, E & Katsura, S 2012, A filter design method in disturbance observer for improvement of robustness against disturbance in time delay system. in IEEE International Symposium on Industrial Electronics., 6237338, pp. 1650-1655, 21st IEEE International Symposium on Industrial Electronics, ISIE 2012, Hangzhou, China, 12/5/28. https://doi.org/10.1109/ISIE.2012.6237338
Saito, Eiichi ; Katsura, Seiichiro. / A filter design method in disturbance observer for improvement of robustness against disturbance in time delay system. IEEE International Symposium on Industrial Electronics. 2012. pp. 1650-1655
@inproceedings{53ff6d01a9da451d8d1b49336e180578,
title = "A filter design method in disturbance observer for improvement of robustness against disturbance in time delay system",
abstract = "Control of time delay system has been researched for a long time. In time delay system, feedback including time delay sometimes makes transient response of a system worse. In the worst case, the system becomes unstable. As time delay compensation method, various methods have been proposed, for example, smith predictor, communication disturbance observer, and so on. In particular, communication disturbance observer is superior than smith predictor in terms of no using a time delay model. However, if an error in plant model exists or disturbance is applied to the system, steady-state error occurs. As disturbance rejection method, communication disturbance observer with an disturbance observer and an integrator in outer loop was proposed in conventional research. But using this method, time delay compensation and disturbance rejection can not be designed independently. Therefore, in this paper, an integrator is not used and two degrees of freedom control is conducted by communication disturbance observer and disturbance observer. For eliminating disturbance, a novel filter design method is proposed. Using proposed filter, the effect of disturbance is suppressed. Finally, the validity of the proposed method is verified by simulation results.",
author = "Eiichi Saito and Seiichiro Katsura",
year = "2012",
doi = "10.1109/ISIE.2012.6237338",
language = "English",
isbn = "9781467301589",
pages = "1650--1655",
booktitle = "IEEE International Symposium on Industrial Electronics",

}

TY - GEN

T1 - A filter design method in disturbance observer for improvement of robustness against disturbance in time delay system

AU - Saito, Eiichi

AU - Katsura, Seiichiro

PY - 2012

Y1 - 2012

N2 - Control of time delay system has been researched for a long time. In time delay system, feedback including time delay sometimes makes transient response of a system worse. In the worst case, the system becomes unstable. As time delay compensation method, various methods have been proposed, for example, smith predictor, communication disturbance observer, and so on. In particular, communication disturbance observer is superior than smith predictor in terms of no using a time delay model. However, if an error in plant model exists or disturbance is applied to the system, steady-state error occurs. As disturbance rejection method, communication disturbance observer with an disturbance observer and an integrator in outer loop was proposed in conventional research. But using this method, time delay compensation and disturbance rejection can not be designed independently. Therefore, in this paper, an integrator is not used and two degrees of freedom control is conducted by communication disturbance observer and disturbance observer. For eliminating disturbance, a novel filter design method is proposed. Using proposed filter, the effect of disturbance is suppressed. Finally, the validity of the proposed method is verified by simulation results.

AB - Control of time delay system has been researched for a long time. In time delay system, feedback including time delay sometimes makes transient response of a system worse. In the worst case, the system becomes unstable. As time delay compensation method, various methods have been proposed, for example, smith predictor, communication disturbance observer, and so on. In particular, communication disturbance observer is superior than smith predictor in terms of no using a time delay model. However, if an error in plant model exists or disturbance is applied to the system, steady-state error occurs. As disturbance rejection method, communication disturbance observer with an disturbance observer and an integrator in outer loop was proposed in conventional research. But using this method, time delay compensation and disturbance rejection can not be designed independently. Therefore, in this paper, an integrator is not used and two degrees of freedom control is conducted by communication disturbance observer and disturbance observer. For eliminating disturbance, a novel filter design method is proposed. Using proposed filter, the effect of disturbance is suppressed. Finally, the validity of the proposed method is verified by simulation results.

UR - http://www.scopus.com/inward/record.url?scp=84864835496&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84864835496&partnerID=8YFLogxK

U2 - 10.1109/ISIE.2012.6237338

DO - 10.1109/ISIE.2012.6237338

M3 - Conference contribution

AN - SCOPUS:84864835496

SN - 9781467301589

SP - 1650

EP - 1655

BT - IEEE International Symposium on Industrial Electronics

ER -