A method for identification of control parameters of NC machine tool and its utilization for high-speed machining and accurate machining time estimation

Yuki Yamamoto, Hideki Aoyama, Noriaki Sano

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

When cutting freeform surface using NC machine tools, two problems occurred. The first arises because the actual feedrate deviates from the command feedrate. The second is the decreasing surface quality due to the large acceleration and deceleration of the control axes. The main cause is the fact that the toolpath of the NC program does not consider control characters. In this paper, an automatic identification method of a sampling time and a generation method of an NC program that considers sampling time are proposed. In addition, a system is proposed to estimate the machining time. The effectiveness of the proposed methods is confirmed by experiments.

Original languageEnglish
Title of host publicationProceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015
PublisherJapan Society of Mechanical Engineers
Publication statusPublished - 2015 Oct 18
Event8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015 - Kyoto, Japan
Duration: 2015 Oct 182015 Oct 22

Other

Other8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015
CountryJapan
CityKyoto
Period15/10/1815/10/22

Fingerprint

Machine tools
Machining
Sampling
Deceleration
Surface properties
Experiments

Keywords

  • CAM system
  • High accuracy machining
  • High speed machining
  • Machine tool controller

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering

Cite this

Yamamoto, Y., Aoyama, H., & Sano, N. (2015). A method for identification of control parameters of NC machine tool and its utilization for high-speed machining and accurate machining time estimation. In Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015 Japan Society of Mechanical Engineers.

A method for identification of control parameters of NC machine tool and its utilization for high-speed machining and accurate machining time estimation. / Yamamoto, Yuki; Aoyama, Hideki; Sano, Noriaki.

Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015. Japan Society of Mechanical Engineers, 2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Yamamoto, Y, Aoyama, H & Sano, N 2015, A method for identification of control parameters of NC machine tool and its utilization for high-speed machining and accurate machining time estimation. in Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015. Japan Society of Mechanical Engineers, 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015, Kyoto, Japan, 15/10/18.
Yamamoto Y, Aoyama H, Sano N. A method for identification of control parameters of NC machine tool and its utilization for high-speed machining and accurate machining time estimation. In Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015. Japan Society of Mechanical Engineers. 2015
Yamamoto, Yuki ; Aoyama, Hideki ; Sano, Noriaki. / A method for identification of control parameters of NC machine tool and its utilization for high-speed machining and accurate machining time estimation. Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015. Japan Society of Mechanical Engineers, 2015.
@inproceedings{1df6c966f0264f71949a5696418582b7,
title = "A method for identification of control parameters of NC machine tool and its utilization for high-speed machining and accurate machining time estimation",
abstract = "When cutting freeform surface using NC machine tools, two problems occurred. The first arises because the actual feedrate deviates from the command feedrate. The second is the decreasing surface quality due to the large acceleration and deceleration of the control axes. The main cause is the fact that the toolpath of the NC program does not consider control characters. In this paper, an automatic identification method of a sampling time and a generation method of an NC program that considers sampling time are proposed. In addition, a system is proposed to estimate the machining time. The effectiveness of the proposed methods is confirmed by experiments.",
keywords = "CAM system, High accuracy machining, High speed machining, Machine tool controller",
author = "Yuki Yamamoto and Hideki Aoyama and Noriaki Sano",
year = "2015",
month = "10",
day = "18",
language = "English",
booktitle = "Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015",
publisher = "Japan Society of Mechanical Engineers",

}

TY - GEN

T1 - A method for identification of control parameters of NC machine tool and its utilization for high-speed machining and accurate machining time estimation

AU - Yamamoto, Yuki

AU - Aoyama, Hideki

AU - Sano, Noriaki

PY - 2015/10/18

Y1 - 2015/10/18

N2 - When cutting freeform surface using NC machine tools, two problems occurred. The first arises because the actual feedrate deviates from the command feedrate. The second is the decreasing surface quality due to the large acceleration and deceleration of the control axes. The main cause is the fact that the toolpath of the NC program does not consider control characters. In this paper, an automatic identification method of a sampling time and a generation method of an NC program that considers sampling time are proposed. In addition, a system is proposed to estimate the machining time. The effectiveness of the proposed methods is confirmed by experiments.

AB - When cutting freeform surface using NC machine tools, two problems occurred. The first arises because the actual feedrate deviates from the command feedrate. The second is the decreasing surface quality due to the large acceleration and deceleration of the control axes. The main cause is the fact that the toolpath of the NC program does not consider control characters. In this paper, an automatic identification method of a sampling time and a generation method of an NC program that considers sampling time are proposed. In addition, a system is proposed to estimate the machining time. The effectiveness of the proposed methods is confirmed by experiments.

KW - CAM system

KW - High accuracy machining

KW - High speed machining

KW - Machine tool controller

UR - http://www.scopus.com/inward/record.url?scp=84974555602&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84974555602&partnerID=8YFLogxK

M3 - Conference contribution

BT - Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015

PB - Japan Society of Mechanical Engineers

ER -