Abstract
Wear characteristics of monocrystalline and sintered CBN grains were experimentally studied. Two different kinds of wear tests were carried out, i.e. continuous wear test and cluster overcut fly grinding test. It was confirmed through the wear tests that there was considerable difference in the wear characteristics among CBN grains, depending on the difference in manufacturing processes and that the wear process of CBN grains was considerably affected by micro fracture of grain edges. Grinding performance of CBN grains were evaluated using the toughness and the wear performance measured in this series of tests. (English abstract)
| Original language | English |
|---|---|
| Pages (from-to) | 922-925 |
| Number of pages | 4 |
| Journal | J. JAPAN SOC. PRECIS. ENGNG. |
| Volume | 50 |
| Issue number | 6 , Jun. 1984 |
| Publication status | Published - 1984 |
| Externally published | Yes |
Fingerprint
ASJC Scopus subject areas
- Engineering(all)
Cite this
A study on grinding performance of CBN grains. (2nd report). Wear characteristics. / Takahashi, M.; Ishimura, A.; Aoyama, Tojiro; Inasaki, I.; Sato, J.
In: J. JAPAN SOC. PRECIS. ENGNG., Vol. 50, No. 6 , Jun. 1984, 1984, p. 922-925.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - A study on grinding performance of CBN grains. (2nd report). Wear characteristics.
AU - Takahashi, M.
AU - Ishimura, A.
AU - Aoyama, Tojiro
AU - Inasaki, I.
AU - Sato, J.
PY - 1984
Y1 - 1984
N2 - Wear characteristics of monocrystalline and sintered CBN grains were experimentally studied. Two different kinds of wear tests were carried out, i.e. continuous wear test and cluster overcut fly grinding test. It was confirmed through the wear tests that there was considerable difference in the wear characteristics among CBN grains, depending on the difference in manufacturing processes and that the wear process of CBN grains was considerably affected by micro fracture of grain edges. Grinding performance of CBN grains were evaluated using the toughness and the wear performance measured in this series of tests. (English abstract)
AB - Wear characteristics of monocrystalline and sintered CBN grains were experimentally studied. Two different kinds of wear tests were carried out, i.e. continuous wear test and cluster overcut fly grinding test. It was confirmed through the wear tests that there was considerable difference in the wear characteristics among CBN grains, depending on the difference in manufacturing processes and that the wear process of CBN grains was considerably affected by micro fracture of grain edges. Grinding performance of CBN grains were evaluated using the toughness and the wear performance measured in this series of tests. (English abstract)
UR - http://www.scopus.com/inward/record.url?scp=0021218636&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0021218636&partnerID=8YFLogxK
M3 - Article
VL - 50
SP - 922
EP - 925
JO - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering
JF - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering
SN - 0912-0289
IS - 6 , Jun. 1984
ER -