An overview of current status of cutting fluids and cooling techniques of turning hard steel

Pay Jun Liew, Ainusyafiqah Shaaroni, Nor Azwadi Che Sidik, Jiwang Yan

Research output: Contribution to journalReview article

34 Citations (Scopus)

Abstract

In the recent years, there has been increasing interest in hard turning over grinding for machining of hardened steels. There are some issues in the process which should be understood and dealt with such as friction and heat generation at the cutting area that can affect the tool life and surface finish apart from other machining results to achieve successful performance. Researchers have worked upon several aspects related to hard turning and came up with their own recommendations to overcome these problems. They have tried to investigate the effects of tool materials, cutting parameters, different cooling type and cooling technique on different machinability responses like tool life, surface roughness, cutting forces, chip morphology, etc. This paper presents a comprehensive literature review on cutting fluids and cooling technique on turning of hardened steels. Type of tools and cutting parameters used by the researchers have been summarized and presented in this paper as well to give proper attention to the various researcher works.

Original languageEnglish
Pages (from-to)380-394
Number of pages15
JournalInternational Journal of Heat and Mass Transfer
Volume114
DOIs
Publication statusPublished - 2017 Nov 1

Fingerprint

Cutting fluids
Steel
steels
Cooling
cooling
fluids
Machining
machining
Machinability
Heat generation
heat generation
grinding
recommendations
Surface roughness
Friction
surface roughness
friction
chips

Keywords

  • Cooling techniques
  • Cutting fluid
  • Hard turning
  • Nanofluids

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanical Engineering
  • Fluid Flow and Transfer Processes

Cite this

An overview of current status of cutting fluids and cooling techniques of turning hard steel. / Liew, Pay Jun; Shaaroni, Ainusyafiqah; Sidik, Nor Azwadi Che; Yan, Jiwang.

In: International Journal of Heat and Mass Transfer, Vol. 114, 01.11.2017, p. 380-394.

Research output: Contribution to journalReview article

Liew, Pay Jun ; Shaaroni, Ainusyafiqah ; Sidik, Nor Azwadi Che ; Yan, Jiwang. / An overview of current status of cutting fluids and cooling techniques of turning hard steel. In: International Journal of Heat and Mass Transfer. 2017 ; Vol. 114. pp. 380-394.
@article{5f62ba7c955e47cfa1abed03dcf33cbc,
title = "An overview of current status of cutting fluids and cooling techniques of turning hard steel",
abstract = "In the recent years, there has been increasing interest in hard turning over grinding for machining of hardened steels. There are some issues in the process which should be understood and dealt with such as friction and heat generation at the cutting area that can affect the tool life and surface finish apart from other machining results to achieve successful performance. Researchers have worked upon several aspects related to hard turning and came up with their own recommendations to overcome these problems. They have tried to investigate the effects of tool materials, cutting parameters, different cooling type and cooling technique on different machinability responses like tool life, surface roughness, cutting forces, chip morphology, etc. This paper presents a comprehensive literature review on cutting fluids and cooling technique on turning of hardened steels. Type of tools and cutting parameters used by the researchers have been summarized and presented in this paper as well to give proper attention to the various researcher works.",
keywords = "Cooling techniques, Cutting fluid, Hard turning, Nanofluids",
author = "Liew, {Pay Jun} and Ainusyafiqah Shaaroni and Sidik, {Nor Azwadi Che} and Jiwang Yan",
year = "2017",
month = "11",
day = "1",
doi = "10.1016/j.ijheatmasstransfer.2017.06.077",
language = "English",
volume = "114",
pages = "380--394",
journal = "International Journal of Heat and Mass Transfer",
issn = "0017-9310",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - An overview of current status of cutting fluids and cooling techniques of turning hard steel

AU - Liew, Pay Jun

AU - Shaaroni, Ainusyafiqah

AU - Sidik, Nor Azwadi Che

AU - Yan, Jiwang

PY - 2017/11/1

Y1 - 2017/11/1

N2 - In the recent years, there has been increasing interest in hard turning over grinding for machining of hardened steels. There are some issues in the process which should be understood and dealt with such as friction and heat generation at the cutting area that can affect the tool life and surface finish apart from other machining results to achieve successful performance. Researchers have worked upon several aspects related to hard turning and came up with their own recommendations to overcome these problems. They have tried to investigate the effects of tool materials, cutting parameters, different cooling type and cooling technique on different machinability responses like tool life, surface roughness, cutting forces, chip morphology, etc. This paper presents a comprehensive literature review on cutting fluids and cooling technique on turning of hardened steels. Type of tools and cutting parameters used by the researchers have been summarized and presented in this paper as well to give proper attention to the various researcher works.

AB - In the recent years, there has been increasing interest in hard turning over grinding for machining of hardened steels. There are some issues in the process which should be understood and dealt with such as friction and heat generation at the cutting area that can affect the tool life and surface finish apart from other machining results to achieve successful performance. Researchers have worked upon several aspects related to hard turning and came up with their own recommendations to overcome these problems. They have tried to investigate the effects of tool materials, cutting parameters, different cooling type and cooling technique on different machinability responses like tool life, surface roughness, cutting forces, chip morphology, etc. This paper presents a comprehensive literature review on cutting fluids and cooling technique on turning of hardened steels. Type of tools and cutting parameters used by the researchers have been summarized and presented in this paper as well to give proper attention to the various researcher works.

KW - Cooling techniques

KW - Cutting fluid

KW - Hard turning

KW - Nanofluids

UR - http://www.scopus.com/inward/record.url?scp=85021180044&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85021180044&partnerID=8YFLogxK

U2 - 10.1016/j.ijheatmasstransfer.2017.06.077

DO - 10.1016/j.ijheatmasstransfer.2017.06.077

M3 - Review article

AN - SCOPUS:85021180044

VL - 114

SP - 380

EP - 394

JO - International Journal of Heat and Mass Transfer

JF - International Journal of Heat and Mass Transfer

SN - 0017-9310

ER -