Analysis of power generation system on gasification of coal and solid wastes using high temperature air

Hiromichi Kobayashi, Kunio Yoshikawa, Susumu Shioda

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A new concept of gasification power generation systems fueled by coal, RDF and various kinds of wastes using high temperature air is proposed. Cycle analyses of these IGCC and boiler systems are done. The calculation shows that calorific value of syngas almost doubles when we increase the gasification air temperature from 25°C to 1000°C. More than 45% thermal efficiency is obtainable for both coal and RDF by employing the new high temperature air blown IGCC system. This IGCC system is applicable to various wastes including low grade wastes such as sludge.

Original languageEnglish
Title of host publicationAmerican Society of Mechanical Engineers, Fuels and Combustion Technologies Division (Publication) FACT
PublisherASME
Pages49-54
Number of pages6
Volume23
Edition1
Publication statusPublished - 1999
Externally publishedYes
EventThe 1999 International Joint Power Generation Conference and ICOPE'99 - Burlingame, CA, USA
Duration: 1999 Jul 251999 Jul 28

Other

OtherThe 1999 International Joint Power Generation Conference and ICOPE'99
CityBurlingame, CA, USA
Period99/7/2599/7/28

Fingerprint

Solid wastes
Gasification
Power generation
Coal
Air
Calorific value
Temperature
Boilers

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Kobayashi, H., Yoshikawa, K., & Shioda, S. (1999). Analysis of power generation system on gasification of coal and solid wastes using high temperature air. In American Society of Mechanical Engineers, Fuels and Combustion Technologies Division (Publication) FACT (1 ed., Vol. 23, pp. 49-54). ASME.

Analysis of power generation system on gasification of coal and solid wastes using high temperature air. / Kobayashi, Hiromichi; Yoshikawa, Kunio; Shioda, Susumu.

American Society of Mechanical Engineers, Fuels and Combustion Technologies Division (Publication) FACT. Vol. 23 1. ed. ASME, 1999. p. 49-54.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kobayashi, H, Yoshikawa, K & Shioda, S 1999, Analysis of power generation system on gasification of coal and solid wastes using high temperature air. in American Society of Mechanical Engineers, Fuels and Combustion Technologies Division (Publication) FACT. 1 edn, vol. 23, ASME, pp. 49-54, The 1999 International Joint Power Generation Conference and ICOPE'99, Burlingame, CA, USA, 99/7/25.
Kobayashi H, Yoshikawa K, Shioda S. Analysis of power generation system on gasification of coal and solid wastes using high temperature air. In American Society of Mechanical Engineers, Fuels and Combustion Technologies Division (Publication) FACT. 1 ed. Vol. 23. ASME. 1999. p. 49-54
Kobayashi, Hiromichi ; Yoshikawa, Kunio ; Shioda, Susumu. / Analysis of power generation system on gasification of coal and solid wastes using high temperature air. American Society of Mechanical Engineers, Fuels and Combustion Technologies Division (Publication) FACT. Vol. 23 1. ed. ASME, 1999. pp. 49-54
@inproceedings{d20e244e6a5345cfbfa558962bdfec38,
title = "Analysis of power generation system on gasification of coal and solid wastes using high temperature air",
abstract = "A new concept of gasification power generation systems fueled by coal, RDF and various kinds of wastes using high temperature air is proposed. Cycle analyses of these IGCC and boiler systems are done. The calculation shows that calorific value of syngas almost doubles when we increase the gasification air temperature from 25°C to 1000°C. More than 45{\%} thermal efficiency is obtainable for both coal and RDF by employing the new high temperature air blown IGCC system. This IGCC system is applicable to various wastes including low grade wastes such as sludge.",
author = "Hiromichi Kobayashi and Kunio Yoshikawa and Susumu Shioda",
year = "1999",
language = "English",
volume = "23",
pages = "49--54",
booktitle = "American Society of Mechanical Engineers, Fuels and Combustion Technologies Division (Publication) FACT",
publisher = "ASME",
edition = "1",

}

TY - GEN

T1 - Analysis of power generation system on gasification of coal and solid wastes using high temperature air

AU - Kobayashi, Hiromichi

AU - Yoshikawa, Kunio

AU - Shioda, Susumu

PY - 1999

Y1 - 1999

N2 - A new concept of gasification power generation systems fueled by coal, RDF and various kinds of wastes using high temperature air is proposed. Cycle analyses of these IGCC and boiler systems are done. The calculation shows that calorific value of syngas almost doubles when we increase the gasification air temperature from 25°C to 1000°C. More than 45% thermal efficiency is obtainable for both coal and RDF by employing the new high temperature air blown IGCC system. This IGCC system is applicable to various wastes including low grade wastes such as sludge.

AB - A new concept of gasification power generation systems fueled by coal, RDF and various kinds of wastes using high temperature air is proposed. Cycle analyses of these IGCC and boiler systems are done. The calculation shows that calorific value of syngas almost doubles when we increase the gasification air temperature from 25°C to 1000°C. More than 45% thermal efficiency is obtainable for both coal and RDF by employing the new high temperature air blown IGCC system. This IGCC system is applicable to various wastes including low grade wastes such as sludge.

UR - http://www.scopus.com/inward/record.url?scp=0033298989&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0033298989&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0033298989

VL - 23

SP - 49

EP - 54

BT - American Society of Mechanical Engineers, Fuels and Combustion Technologies Division (Publication) FACT

PB - ASME

ER -