Anisotropic polymerization of a long-chain diacetylene derivative Langmuir-Blodgett film on a step-bunched SiO2/Si surface

Ryo Onoki, Keiji Ueno, Hiroo Nakahara, Genki Yoshikawa, Susumu Ikeda, Shiro Entani, Tetsuhiko Miyadera, Ikuyo Nakai, Hiroshi Kondoh, Toshiaki Ohta, Manabu Kiguchi, Koichiro Saiki

Research output: Contribution to journalArticle

5 Citations (Scopus)

Abstract

Alternating facet/terrace nanostructures were fabricated on a SiO 2 surface by step-bunching and thermal oxidation of a vicinal Si(111) substrate, and their influence upon the polymerization direction of a long-chain diacetylene derivative monolayer film was investigated by angle-dependent polarized near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. It was found that the peak intensity of the C 1s-π* transition was stronger when the electric vector plane of the incident X-ray was parallel to the direction of the periodic facet/terrace structures rather than perpendicular to them. On the contrary, a polymer film fabricated on a flat SiO2 surface showed no in-plane anisotropy of the peak intensity. These results indicate that the diacetylene groups in the diacetylene derivative monolayer are preferentially photopolymerized in the direction not across but along the periodic one-dimensional structures on the step-bunched and thermally oxidized SiO2/Si(111) surface.

Original languageEnglish
Pages (from-to)5742-5747
Number of pages6
JournalLangmuir
Volume22
Issue number13
DOIs
Publication statusPublished - 2006 Jun 20
Externally publishedYes

Fingerprint

Langmuir Blodgett films
Langmuir-Blodgett films
flat surfaces
polymerization
Polymerization
Derivatives
Monolayers
X ray absorption near edge structure spectroscopy
bunching
Polymer films
Nanostructures
Anisotropy
x rays
fine structure
X rays
Oxidation
oxidation
anisotropy
polymers
Substrates

ASJC Scopus subject areas

  • Physical and Theoretical Chemistry
  • Colloid and Surface Chemistry

Cite this

Onoki, R., Ueno, K., Nakahara, H., Yoshikawa, G., Ikeda, S., Entani, S., ... Saiki, K. (2006). Anisotropic polymerization of a long-chain diacetylene derivative Langmuir-Blodgett film on a step-bunched SiO2/Si surface. Langmuir, 22(13), 5742-5747. https://doi.org/10.1021/la060482d

Anisotropic polymerization of a long-chain diacetylene derivative Langmuir-Blodgett film on a step-bunched SiO2/Si surface. / Onoki, Ryo; Ueno, Keiji; Nakahara, Hiroo; Yoshikawa, Genki; Ikeda, Susumu; Entani, Shiro; Miyadera, Tetsuhiko; Nakai, Ikuyo; Kondoh, Hiroshi; Ohta, Toshiaki; Kiguchi, Manabu; Saiki, Koichiro.

In: Langmuir, Vol. 22, No. 13, 20.06.2006, p. 5742-5747.

Research output: Contribution to journalArticle

Onoki, R, Ueno, K, Nakahara, H, Yoshikawa, G, Ikeda, S, Entani, S, Miyadera, T, Nakai, I, Kondoh, H, Ohta, T, Kiguchi, M & Saiki, K 2006, 'Anisotropic polymerization of a long-chain diacetylene derivative Langmuir-Blodgett film on a step-bunched SiO2/Si surface', Langmuir, vol. 22, no. 13, pp. 5742-5747. https://doi.org/10.1021/la060482d
Onoki, Ryo ; Ueno, Keiji ; Nakahara, Hiroo ; Yoshikawa, Genki ; Ikeda, Susumu ; Entani, Shiro ; Miyadera, Tetsuhiko ; Nakai, Ikuyo ; Kondoh, Hiroshi ; Ohta, Toshiaki ; Kiguchi, Manabu ; Saiki, Koichiro. / Anisotropic polymerization of a long-chain diacetylene derivative Langmuir-Blodgett film on a step-bunched SiO2/Si surface. In: Langmuir. 2006 ; Vol. 22, No. 13. pp. 5742-5747.
@article{473d67a025154bf580df1f2d313f2429,
title = "Anisotropic polymerization of a long-chain diacetylene derivative Langmuir-Blodgett film on a step-bunched SiO2/Si surface",
abstract = "Alternating facet/terrace nanostructures were fabricated on a SiO 2 surface by step-bunching and thermal oxidation of a vicinal Si(111) substrate, and their influence upon the polymerization direction of a long-chain diacetylene derivative monolayer film was investigated by angle-dependent polarized near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. It was found that the peak intensity of the C 1s-π* transition was stronger when the electric vector plane of the incident X-ray was parallel to the direction of the periodic facet/terrace structures rather than perpendicular to them. On the contrary, a polymer film fabricated on a flat SiO2 surface showed no in-plane anisotropy of the peak intensity. These results indicate that the diacetylene groups in the diacetylene derivative monolayer are preferentially photopolymerized in the direction not across but along the periodic one-dimensional structures on the step-bunched and thermally oxidized SiO2/Si(111) surface.",
author = "Ryo Onoki and Keiji Ueno and Hiroo Nakahara and Genki Yoshikawa and Susumu Ikeda and Shiro Entani and Tetsuhiko Miyadera and Ikuyo Nakai and Hiroshi Kondoh and Toshiaki Ohta and Manabu Kiguchi and Koichiro Saiki",
year = "2006",
month = "6",
day = "20",
doi = "10.1021/la060482d",
language = "English",
volume = "22",
pages = "5742--5747",
journal = "Langmuir",
issn = "0743-7463",
publisher = "American Chemical Society",
number = "13",

}

TY - JOUR

T1 - Anisotropic polymerization of a long-chain diacetylene derivative Langmuir-Blodgett film on a step-bunched SiO2/Si surface

AU - Onoki, Ryo

AU - Ueno, Keiji

AU - Nakahara, Hiroo

AU - Yoshikawa, Genki

AU - Ikeda, Susumu

AU - Entani, Shiro

AU - Miyadera, Tetsuhiko

AU - Nakai, Ikuyo

AU - Kondoh, Hiroshi

AU - Ohta, Toshiaki

AU - Kiguchi, Manabu

AU - Saiki, Koichiro

PY - 2006/6/20

Y1 - 2006/6/20

N2 - Alternating facet/terrace nanostructures were fabricated on a SiO 2 surface by step-bunching and thermal oxidation of a vicinal Si(111) substrate, and their influence upon the polymerization direction of a long-chain diacetylene derivative monolayer film was investigated by angle-dependent polarized near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. It was found that the peak intensity of the C 1s-π* transition was stronger when the electric vector plane of the incident X-ray was parallel to the direction of the periodic facet/terrace structures rather than perpendicular to them. On the contrary, a polymer film fabricated on a flat SiO2 surface showed no in-plane anisotropy of the peak intensity. These results indicate that the diacetylene groups in the diacetylene derivative monolayer are preferentially photopolymerized in the direction not across but along the periodic one-dimensional structures on the step-bunched and thermally oxidized SiO2/Si(111) surface.

AB - Alternating facet/terrace nanostructures were fabricated on a SiO 2 surface by step-bunching and thermal oxidation of a vicinal Si(111) substrate, and their influence upon the polymerization direction of a long-chain diacetylene derivative monolayer film was investigated by angle-dependent polarized near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. It was found that the peak intensity of the C 1s-π* transition was stronger when the electric vector plane of the incident X-ray was parallel to the direction of the periodic facet/terrace structures rather than perpendicular to them. On the contrary, a polymer film fabricated on a flat SiO2 surface showed no in-plane anisotropy of the peak intensity. These results indicate that the diacetylene groups in the diacetylene derivative monolayer are preferentially photopolymerized in the direction not across but along the periodic one-dimensional structures on the step-bunched and thermally oxidized SiO2/Si(111) surface.

UR - http://www.scopus.com/inward/record.url?scp=33745746059&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33745746059&partnerID=8YFLogxK

U2 - 10.1021/la060482d

DO - 10.1021/la060482d

M3 - Article

C2 - 16768503

AN - SCOPUS:33745746059

VL - 22

SP - 5742

EP - 5747

JO - Langmuir

JF - Langmuir

SN - 0743-7463

IS - 13

ER -