Automatic Estimation of Natural Frequencies and Damping Ratios of Building Structures

T. Mimura, Akira Mita

Research output: Contribution to journalArticle

Abstract

Our laboratory has been working on developing a practical structural health monitoring (SHM) system consisting of digital sensor network and a cloud server. The usefulness of such a system has been recognized by real estate companies, construction companies and design firms. We estimate the number of systems exceeded one hundred. In the SHM system, modal parameters such as natural frequency and damping ratio are important damage indicators to diagnose the condition of structures. However, existing conventional methods require the knowledge of expert to select the proper modal parameters. This is the barrier for promoting the system. Under an emergency event, we will not be able to have immediate help from the experts as they will be very busy to take care of so many buildings. In this paper, we propose an automatic estimation method to extract fundamental modal frequencies and damping ratios under the assumption we have information on mass distribution and mode shapes. We use these information to filter out the necessary modal information only so that any system identification methods that are applicable to single-degree-of-freedom systems will work well. To test the method, 40 story steel and RC building structural models were developed. They were simplified to tri-linear skeleton type nonlinear model to show the feasibility of the proposed method to nonlinear level as well. Finally, the method is applied to real tall buildings near Shinjuku Station. The building is 29 story and made of steel. It suffered nonstructural damage during Tohoku Earthquake of March 11, 2011.

Original languageEnglish
Pages (from-to)163-169
Number of pages7
JournalProcedia Engineering
Volume188
DOIs
Publication statusPublished - 2017

Fingerprint

Structural health monitoring
Natural frequencies
Damping
Tall buildings
Steel
Information use
Sensor networks
Industry
Earthquakes
Identification (control systems)
Servers

Keywords

  • ARX model
  • Inverse of mode matrix
  • Modal estimation
  • Nonlinear analysis
  • Structural Health Monitoring

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Automatic Estimation of Natural Frequencies and Damping Ratios of Building Structures. / Mimura, T.; Mita, Akira.

In: Procedia Engineering, Vol. 188, 2017, p. 163-169.

Research output: Contribution to journalArticle

@article{7d4208f4283e4f33b62700b042a60987,
title = "Automatic Estimation of Natural Frequencies and Damping Ratios of Building Structures",
abstract = "Our laboratory has been working on developing a practical structural health monitoring (SHM) system consisting of digital sensor network and a cloud server. The usefulness of such a system has been recognized by real estate companies, construction companies and design firms. We estimate the number of systems exceeded one hundred. In the SHM system, modal parameters such as natural frequency and damping ratio are important damage indicators to diagnose the condition of structures. However, existing conventional methods require the knowledge of expert to select the proper modal parameters. This is the barrier for promoting the system. Under an emergency event, we will not be able to have immediate help from the experts as they will be very busy to take care of so many buildings. In this paper, we propose an automatic estimation method to extract fundamental modal frequencies and damping ratios under the assumption we have information on mass distribution and mode shapes. We use these information to filter out the necessary modal information only so that any system identification methods that are applicable to single-degree-of-freedom systems will work well. To test the method, 40 story steel and RC building structural models were developed. They were simplified to tri-linear skeleton type nonlinear model to show the feasibility of the proposed method to nonlinear level as well. Finally, the method is applied to real tall buildings near Shinjuku Station. The building is 29 story and made of steel. It suffered nonstructural damage during Tohoku Earthquake of March 11, 2011.",
keywords = "ARX model, Inverse of mode matrix, Modal estimation, Nonlinear analysis, Structural Health Monitoring",
author = "T. Mimura and Akira Mita",
year = "2017",
doi = "10.1016/j.proeng.2017.04.470",
language = "English",
volume = "188",
pages = "163--169",
journal = "Procedia Engineering",
issn = "1877-7058",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Automatic Estimation of Natural Frequencies and Damping Ratios of Building Structures

AU - Mimura, T.

AU - Mita, Akira

PY - 2017

Y1 - 2017

N2 - Our laboratory has been working on developing a practical structural health monitoring (SHM) system consisting of digital sensor network and a cloud server. The usefulness of such a system has been recognized by real estate companies, construction companies and design firms. We estimate the number of systems exceeded one hundred. In the SHM system, modal parameters such as natural frequency and damping ratio are important damage indicators to diagnose the condition of structures. However, existing conventional methods require the knowledge of expert to select the proper modal parameters. This is the barrier for promoting the system. Under an emergency event, we will not be able to have immediate help from the experts as they will be very busy to take care of so many buildings. In this paper, we propose an automatic estimation method to extract fundamental modal frequencies and damping ratios under the assumption we have information on mass distribution and mode shapes. We use these information to filter out the necessary modal information only so that any system identification methods that are applicable to single-degree-of-freedom systems will work well. To test the method, 40 story steel and RC building structural models were developed. They were simplified to tri-linear skeleton type nonlinear model to show the feasibility of the proposed method to nonlinear level as well. Finally, the method is applied to real tall buildings near Shinjuku Station. The building is 29 story and made of steel. It suffered nonstructural damage during Tohoku Earthquake of March 11, 2011.

AB - Our laboratory has been working on developing a practical structural health monitoring (SHM) system consisting of digital sensor network and a cloud server. The usefulness of such a system has been recognized by real estate companies, construction companies and design firms. We estimate the number of systems exceeded one hundred. In the SHM system, modal parameters such as natural frequency and damping ratio are important damage indicators to diagnose the condition of structures. However, existing conventional methods require the knowledge of expert to select the proper modal parameters. This is the barrier for promoting the system. Under an emergency event, we will not be able to have immediate help from the experts as they will be very busy to take care of so many buildings. In this paper, we propose an automatic estimation method to extract fundamental modal frequencies and damping ratios under the assumption we have information on mass distribution and mode shapes. We use these information to filter out the necessary modal information only so that any system identification methods that are applicable to single-degree-of-freedom systems will work well. To test the method, 40 story steel and RC building structural models were developed. They were simplified to tri-linear skeleton type nonlinear model to show the feasibility of the proposed method to nonlinear level as well. Finally, the method is applied to real tall buildings near Shinjuku Station. The building is 29 story and made of steel. It suffered nonstructural damage during Tohoku Earthquake of March 11, 2011.

KW - ARX model

KW - Inverse of mode matrix

KW - Modal estimation

KW - Nonlinear analysis

KW - Structural Health Monitoring

UR - http://www.scopus.com/inward/record.url?scp=85020429202&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85020429202&partnerID=8YFLogxK

U2 - 10.1016/j.proeng.2017.04.470

DO - 10.1016/j.proeng.2017.04.470

M3 - Article

VL - 188

SP - 163

EP - 169

JO - Procedia Engineering

JF - Procedia Engineering

SN - 1877-7058

ER -