Basic study on parameters to quantitatively evaluate shape impression

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Manufacturing trends are gradually changing from mass production and mass consumption to "production of diverse products in small quantities". For this reason, design is recognized as an important element with which a customer judges value. In order to employ the designer/s sensitivity and realize high quality designs, CAD systems which can carry out analysis evaluation of design properties quantitatively, and improve design based on the results is required. In the initial stage of designing, designers embody image form by repeating a sketch. In this process, if the form image of a sketch curve can be evaluated quantitatively and the design form image can be controlled based on the evaluation parameters, this will provide effective design support. In this research, we proposed parameters by which the image of sketch form can be evaluated quantitatively, and investigate the tendencies of various curves and curved surface form. We also developed a system which reconstructs design form using the proposed evaluation parameters.

Original languageEnglish
Title of host publicationASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008
Pages851-858
Number of pages8
EditionPARTS A AND B
DOIs
Publication statusPublished - 2008 Dec 1
EventASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008 - Brooklyn, NY, United States
Duration: 2008 Aug 32008 Aug 6

Publication series

NameProceedings of the ASME Design Engineering Technical Conference
NumberPARTS A AND B
Volume3

Other

OtherASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008
CountryUnited States
CityBrooklyn, NY
Period08/8/308/8/6

    Fingerprint

ASJC Scopus subject areas

  • Modelling and Simulation
  • Mechanical Engineering
  • Computer Science Applications
  • Computer Graphics and Computer-Aided Design

Cite this

Takeda, K., & Aoyama, H. (2008). Basic study on parameters to quantitatively evaluate shape impression. In ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008 (PARTS A AND B ed., pp. 851-858). (Proceedings of the ASME Design Engineering Technical Conference; Vol. 3, No. PARTS A AND B). https://doi.org/10.1115/DETC2008-49569