Bolometric ferromagnetic resonance techniques for characterising spin-Hall effect at high temperatures

P. Phu, Kazuto Yamanoi, K. Ohnishi, J. Hyodo, K. Rogdakis, Y. Yamazaki, T. Kimura, H. Kurebayashi

Research output: Contribution to journalArticle

Abstract

We report on current-induced ferromagnetic resonance techniques to characterise spin-Hall effect at high temperatures. A microwave current was injected into a patterned CoFeB/Pt bi-layer grown on a glass substrate, simultaneously exerting spin-transfer torques through the spin-Hall effect and also causing Joule heating enabling the control of the device temperature. We measured the device temperature by using the device itself as a local temperature sensor. A clear reduction of CoFeB magnetisation was observed as the device temperature was increased allowing us to estimate the Curie temperature of our CoFeB film to be 920 K. The spin-Hall angle of Pt was quantified as (1.72 ± 0.03) × 10 −2 at 300 K and was slightly increased to (1.75 ± 0.02) × 10 −2 at 410 K. This simple method can be widely used for quantifying the spin-Hall angle of a large variety of materials at high temperatures.

Original languageEnglish
Pages (from-to)304-307
Number of pages4
JournalJournal of Magnetism and Magnetic Materials
Volume485
DOIs
Publication statusPublished - 2019 Sep 1
Externally publishedYes

Fingerprint

Spin Hall effect
Ferromagnetic resonance
ferromagnetic resonance
Hall effect
Temperature
Joule heating
Induced currents
temperature sensors
Temperature sensors
Curie temperature
temperature
torque
Magnetization
Torque
Microwaves
microwaves
Glass
magnetization
glass
Substrates

Keywords

  • High-temperature-measurement
  • Magnetisation dynamics
  • Spin-Hall-angle
  • Spin-transfer-torque

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics

Cite this

Bolometric ferromagnetic resonance techniques for characterising spin-Hall effect at high temperatures. / Phu, P.; Yamanoi, Kazuto; Ohnishi, K.; Hyodo, J.; Rogdakis, K.; Yamazaki, Y.; Kimura, T.; Kurebayashi, H.

In: Journal of Magnetism and Magnetic Materials, Vol. 485, 01.09.2019, p. 304-307.

Research output: Contribution to journalArticle

Phu, P. ; Yamanoi, Kazuto ; Ohnishi, K. ; Hyodo, J. ; Rogdakis, K. ; Yamazaki, Y. ; Kimura, T. ; Kurebayashi, H. / Bolometric ferromagnetic resonance techniques for characterising spin-Hall effect at high temperatures. In: Journal of Magnetism and Magnetic Materials. 2019 ; Vol. 485. pp. 304-307.
@article{22d60d2f9c3045ccb0da46893bfde686,
title = "Bolometric ferromagnetic resonance techniques for characterising spin-Hall effect at high temperatures",
abstract = "We report on current-induced ferromagnetic resonance techniques to characterise spin-Hall effect at high temperatures. A microwave current was injected into a patterned CoFeB/Pt bi-layer grown on a glass substrate, simultaneously exerting spin-transfer torques through the spin-Hall effect and also causing Joule heating enabling the control of the device temperature. We measured the device temperature by using the device itself as a local temperature sensor. A clear reduction of CoFeB magnetisation was observed as the device temperature was increased allowing us to estimate the Curie temperature of our CoFeB film to be 920 K. The spin-Hall angle of Pt was quantified as (1.72 ± 0.03) × 10 −2 at 300 K and was slightly increased to (1.75 ± 0.02) × 10 −2 at 410 K. This simple method can be widely used for quantifying the spin-Hall angle of a large variety of materials at high temperatures.",
keywords = "High-temperature-measurement, Magnetisation dynamics, Spin-Hall-angle, Spin-transfer-torque",
author = "P. Phu and Kazuto Yamanoi and K. Ohnishi and J. Hyodo and K. Rogdakis and Y. Yamazaki and T. Kimura and H. Kurebayashi",
year = "2019",
month = "9",
day = "1",
doi = "10.1016/j.jmmm.2019.04.070",
language = "English",
volume = "485",
pages = "304--307",
journal = "Journal of Magnetism and Magnetic Materials",
issn = "0304-8853",
publisher = "Elsevier",

}

TY - JOUR

T1 - Bolometric ferromagnetic resonance techniques for characterising spin-Hall effect at high temperatures

AU - Phu, P.

AU - Yamanoi, Kazuto

AU - Ohnishi, K.

AU - Hyodo, J.

AU - Rogdakis, K.

AU - Yamazaki, Y.

AU - Kimura, T.

AU - Kurebayashi, H.

PY - 2019/9/1

Y1 - 2019/9/1

N2 - We report on current-induced ferromagnetic resonance techniques to characterise spin-Hall effect at high temperatures. A microwave current was injected into a patterned CoFeB/Pt bi-layer grown on a glass substrate, simultaneously exerting spin-transfer torques through the spin-Hall effect and also causing Joule heating enabling the control of the device temperature. We measured the device temperature by using the device itself as a local temperature sensor. A clear reduction of CoFeB magnetisation was observed as the device temperature was increased allowing us to estimate the Curie temperature of our CoFeB film to be 920 K. The spin-Hall angle of Pt was quantified as (1.72 ± 0.03) × 10 −2 at 300 K and was slightly increased to (1.75 ± 0.02) × 10 −2 at 410 K. This simple method can be widely used for quantifying the spin-Hall angle of a large variety of materials at high temperatures.

AB - We report on current-induced ferromagnetic resonance techniques to characterise spin-Hall effect at high temperatures. A microwave current was injected into a patterned CoFeB/Pt bi-layer grown on a glass substrate, simultaneously exerting spin-transfer torques through the spin-Hall effect and also causing Joule heating enabling the control of the device temperature. We measured the device temperature by using the device itself as a local temperature sensor. A clear reduction of CoFeB magnetisation was observed as the device temperature was increased allowing us to estimate the Curie temperature of our CoFeB film to be 920 K. The spin-Hall angle of Pt was quantified as (1.72 ± 0.03) × 10 −2 at 300 K and was slightly increased to (1.75 ± 0.02) × 10 −2 at 410 K. This simple method can be widely used for quantifying the spin-Hall angle of a large variety of materials at high temperatures.

KW - High-temperature-measurement

KW - Magnetisation dynamics

KW - Spin-Hall-angle

KW - Spin-transfer-torque

UR - http://www.scopus.com/inward/record.url?scp=85065476311&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85065476311&partnerID=8YFLogxK

U2 - 10.1016/j.jmmm.2019.04.070

DO - 10.1016/j.jmmm.2019.04.070

M3 - Article

VL - 485

SP - 304

EP - 307

JO - Journal of Magnetism and Magnetic Materials

JF - Journal of Magnetism and Magnetic Materials

SN - 0304-8853

ER -