Cell compatibility of Co-Cr-Mo alloy treated with electrolytic in-process dressing grinding/thermal oxidation hybrid process

Ihori Hiraga, Mihoshi Hamada, Jun Komotori, Masayoshi Mizutani

Research output: Contribution to journalArticle

Abstract

In order to improve cell compatibility of the Co-Cr-Mo alloys, an electrolytic in-process dressing (ELID) grinding and thermal oxidation (TO) hybrid process was performed. Surface roughness of specimens was measured by a non-contact type three-dimensional profilometer, and the elemental analysis of the treated surface was performed by a glow discharge optical emission spectrometer (GD-OES). To evaluate cell compatibility, a cell culturing assay was carried out. The surface roughness of all treated specimens was lower than that of the sliding parts of commercially applied artificial hip joints. Elemental analysis showed that the oxygen content from the surface of specimens treated with TO increased significantly with the increase in treating temperature. In particular, a region with a lower content of cobalt was observed at the ELID/TO hybrid-treated specimens with treated temperatures higher than 500°C. Moreover, the ELID/TO hybrid-treated specimens showed better cell compatibility than other specimens. This was because the levels of cobalt ions released from ELID/TO hybrid-treated specimens was lower than that of the others.

Original languageEnglish
Pages (from-to)486-495
Number of pages10
JournalInternational Journal of Nanomanufacturing
Volume9
Issue number5-6
DOIs
Publication statusPublished - 2013

Fingerprint

Oxidation
Cobalt
Surface roughness
Hip prostheses
Glow discharges
Chemical analysis
Spectrometers
Assays
Hot Temperature
Temperature
Oxygen
Ions

Keywords

  • Artificial hip joint
  • Biomaterials
  • Cell compatibility
  • Co-Cr-Mo alloy
  • Electrolytic in-process dressing
  • ELID
  • Grinding
  • Metallic ions
  • Surface hardness
  • Surface modification
  • Surface roughness
  • Thermal oxidation

ASJC Scopus subject areas

  • Industrial and Manufacturing Engineering

Cite this

Cell compatibility of Co-Cr-Mo alloy treated with electrolytic in-process dressing grinding/thermal oxidation hybrid process. / Hiraga, Ihori; Hamada, Mihoshi; Komotori, Jun; Mizutani, Masayoshi.

In: International Journal of Nanomanufacturing, Vol. 9, No. 5-6, 2013, p. 486-495.

Research output: Contribution to journalArticle

@article{e381dbddca7b41b79540c7fc5170d514,
title = "Cell compatibility of Co-Cr-Mo alloy treated with electrolytic in-process dressing grinding/thermal oxidation hybrid process",
abstract = "In order to improve cell compatibility of the Co-Cr-Mo alloys, an electrolytic in-process dressing (ELID) grinding and thermal oxidation (TO) hybrid process was performed. Surface roughness of specimens was measured by a non-contact type three-dimensional profilometer, and the elemental analysis of the treated surface was performed by a glow discharge optical emission spectrometer (GD-OES). To evaluate cell compatibility, a cell culturing assay was carried out. The surface roughness of all treated specimens was lower than that of the sliding parts of commercially applied artificial hip joints. Elemental analysis showed that the oxygen content from the surface of specimens treated with TO increased significantly with the increase in treating temperature. In particular, a region with a lower content of cobalt was observed at the ELID/TO hybrid-treated specimens with treated temperatures higher than 500°C. Moreover, the ELID/TO hybrid-treated specimens showed better cell compatibility than other specimens. This was because the levels of cobalt ions released from ELID/TO hybrid-treated specimens was lower than that of the others.",
keywords = "Artificial hip joint, Biomaterials, Cell compatibility, Co-Cr-Mo alloy, Electrolytic in-process dressing, ELID, Grinding, Metallic ions, Surface hardness, Surface modification, Surface roughness, Thermal oxidation",
author = "Ihori Hiraga and Mihoshi Hamada and Jun Komotori and Masayoshi Mizutani",
year = "2013",
doi = "10.1504/IJNM.2013.057592",
language = "English",
volume = "9",
pages = "486--495",
journal = "International Journal of Nanomanufacturing",
issn = "1746-9392",
publisher = "Inderscience Enterprises Ltd",
number = "5-6",

}

TY - JOUR

T1 - Cell compatibility of Co-Cr-Mo alloy treated with electrolytic in-process dressing grinding/thermal oxidation hybrid process

AU - Hiraga, Ihori

AU - Hamada, Mihoshi

AU - Komotori, Jun

AU - Mizutani, Masayoshi

PY - 2013

Y1 - 2013

N2 - In order to improve cell compatibility of the Co-Cr-Mo alloys, an electrolytic in-process dressing (ELID) grinding and thermal oxidation (TO) hybrid process was performed. Surface roughness of specimens was measured by a non-contact type three-dimensional profilometer, and the elemental analysis of the treated surface was performed by a glow discharge optical emission spectrometer (GD-OES). To evaluate cell compatibility, a cell culturing assay was carried out. The surface roughness of all treated specimens was lower than that of the sliding parts of commercially applied artificial hip joints. Elemental analysis showed that the oxygen content from the surface of specimens treated with TO increased significantly with the increase in treating temperature. In particular, a region with a lower content of cobalt was observed at the ELID/TO hybrid-treated specimens with treated temperatures higher than 500°C. Moreover, the ELID/TO hybrid-treated specimens showed better cell compatibility than other specimens. This was because the levels of cobalt ions released from ELID/TO hybrid-treated specimens was lower than that of the others.

AB - In order to improve cell compatibility of the Co-Cr-Mo alloys, an electrolytic in-process dressing (ELID) grinding and thermal oxidation (TO) hybrid process was performed. Surface roughness of specimens was measured by a non-contact type three-dimensional profilometer, and the elemental analysis of the treated surface was performed by a glow discharge optical emission spectrometer (GD-OES). To evaluate cell compatibility, a cell culturing assay was carried out. The surface roughness of all treated specimens was lower than that of the sliding parts of commercially applied artificial hip joints. Elemental analysis showed that the oxygen content from the surface of specimens treated with TO increased significantly with the increase in treating temperature. In particular, a region with a lower content of cobalt was observed at the ELID/TO hybrid-treated specimens with treated temperatures higher than 500°C. Moreover, the ELID/TO hybrid-treated specimens showed better cell compatibility than other specimens. This was because the levels of cobalt ions released from ELID/TO hybrid-treated specimens was lower than that of the others.

KW - Artificial hip joint

KW - Biomaterials

KW - Cell compatibility

KW - Co-Cr-Mo alloy

KW - Electrolytic in-process dressing

KW - ELID

KW - Grinding

KW - Metallic ions

KW - Surface hardness

KW - Surface modification

KW - Surface roughness

KW - Thermal oxidation

UR - http://www.scopus.com/inward/record.url?scp=84888627906&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84888627906&partnerID=8YFLogxK

U2 - 10.1504/IJNM.2013.057592

DO - 10.1504/IJNM.2013.057592

M3 - Article

AN - SCOPUS:84888627906

VL - 9

SP - 486

EP - 495

JO - International Journal of Nanomanufacturing

JF - International Journal of Nanomanufacturing

SN - 1746-9392

IS - 5-6

ER -