Comparison of boron-doped diamond and glassy carbon electrodes for determination of procaine hydrochloride

Min Wei, Yanli Zhou, Jinfang Zhi, Degang Fu, Yasuaki Einaga, Akira Fujishima, Xuemei Wang, Zhongze Gu

Research output: Contribution to journalArticle

19 Citations (Scopus)

Abstract

The electrochemical oxidation of procaine hydrochloride (PC·HCL, 2-diethylaminoethyl 4-aminobenzoate hydrochloride) was investigated at as-deposited boron-doped diamond (ad-BDD) electrode, anodically oxidized BDD (aoBDD) electrode and glassy carbon (GC) electrode using cyclic voltammetry (CV). Well-defined cyclic voltammograms were obtained for PC·HCL oxidation with high signal-to-background (S/B) ratio, low tendency for adsorption, good reproducibility and long-term stability at ad-BDD electrode, demonstrating its superior electrochemical behavior and significant advantages in contrast to ao-BDD and GC electrode. At 100 μM PC·HCL, the voltammetric S/B ratio was nearly one order of magnitude higher at an ad-BDD electrode than that at a GC electrode. In a separate set of experiments for oxidation of 100 μM PC·HCL, 96%, 92% and 84% of the initial oxidation peak current was retained at the ad-BDD, ao-BDD and GC electrode, respectively, by stirring the solution after the tenth cycle. The current response was linearly proportional to the square root of the scan rate within the range 10-1000 mV s-1 in 10 μM PC·HCL solutions, indicating that the oxidation process was diffusion-controlled with negligible adsorption at an ad-BDD surface. The good linearity was observed for a concentration range from 5 to 200 μM with a linear equation of y = 0.03517x + 0.65346 (r = 0.999), and the detection limit was 0.5 μM for oxidation of PC·HCL at the adBDD electrode. The ad-BDD electrode could maintain 100% of its original activity after intermittent use for 3 months.

Original languageEnglish
Pages (from-to)137-143
Number of pages7
JournalElectroanalysis
Volume20
Issue number2
DOIs
Publication statusPublished - 2008 Jan

Fingerprint

Procaine
Diamond
Boron
Glassy carbon
Diamonds
Electrodes
Oxidation
para-Aminobenzoates
Adsorption
Electrochemical oxidation
Linear equations
Cyclic voltammetry

Keywords

  • Boron-doped diamond electrode
  • Cyclic voltammetry
  • Glassy carbon electrode
  • Procaine hydrochloride

ASJC Scopus subject areas

  • Analytical Chemistry

Cite this

Comparison of boron-doped diamond and glassy carbon electrodes for determination of procaine hydrochloride. / Wei, Min; Zhou, Yanli; Zhi, Jinfang; Fu, Degang; Einaga, Yasuaki; Fujishima, Akira; Wang, Xuemei; Gu, Zhongze.

In: Electroanalysis, Vol. 20, No. 2, 01.2008, p. 137-143.

Research output: Contribution to journalArticle

Wei, Min ; Zhou, Yanli ; Zhi, Jinfang ; Fu, Degang ; Einaga, Yasuaki ; Fujishima, Akira ; Wang, Xuemei ; Gu, Zhongze. / Comparison of boron-doped diamond and glassy carbon electrodes for determination of procaine hydrochloride. In: Electroanalysis. 2008 ; Vol. 20, No. 2. pp. 137-143.
@article{540a661191df4a939095a5bbd83d88bd,
title = "Comparison of boron-doped diamond and glassy carbon electrodes for determination of procaine hydrochloride",
abstract = "The electrochemical oxidation of procaine hydrochloride (PC·HCL, 2-diethylaminoethyl 4-aminobenzoate hydrochloride) was investigated at as-deposited boron-doped diamond (ad-BDD) electrode, anodically oxidized BDD (aoBDD) electrode and glassy carbon (GC) electrode using cyclic voltammetry (CV). Well-defined cyclic voltammograms were obtained for PC·HCL oxidation with high signal-to-background (S/B) ratio, low tendency for adsorption, good reproducibility and long-term stability at ad-BDD electrode, demonstrating its superior electrochemical behavior and significant advantages in contrast to ao-BDD and GC electrode. At 100 μM PC·HCL, the voltammetric S/B ratio was nearly one order of magnitude higher at an ad-BDD electrode than that at a GC electrode. In a separate set of experiments for oxidation of 100 μM PC·HCL, 96{\%}, 92{\%} and 84{\%} of the initial oxidation peak current was retained at the ad-BDD, ao-BDD and GC electrode, respectively, by stirring the solution after the tenth cycle. The current response was linearly proportional to the square root of the scan rate within the range 10-1000 mV s-1 in 10 μM PC·HCL solutions, indicating that the oxidation process was diffusion-controlled with negligible adsorption at an ad-BDD surface. The good linearity was observed for a concentration range from 5 to 200 μM with a linear equation of y = 0.03517x + 0.65346 (r = 0.999), and the detection limit was 0.5 μM for oxidation of PC·HCL at the adBDD electrode. The ad-BDD electrode could maintain 100{\%} of its original activity after intermittent use for 3 months.",
keywords = "Boron-doped diamond electrode, Cyclic voltammetry, Glassy carbon electrode, Procaine hydrochloride",
author = "Min Wei and Yanli Zhou and Jinfang Zhi and Degang Fu and Yasuaki Einaga and Akira Fujishima and Xuemei Wang and Zhongze Gu",
year = "2008",
month = "1",
doi = "10.1002/elan.200704024",
language = "English",
volume = "20",
pages = "137--143",
journal = "Electroanalysis",
issn = "1040-0397",
publisher = "Wiley-VCH Verlag",
number = "2",

}

TY - JOUR

T1 - Comparison of boron-doped diamond and glassy carbon electrodes for determination of procaine hydrochloride

AU - Wei, Min

AU - Zhou, Yanli

AU - Zhi, Jinfang

AU - Fu, Degang

AU - Einaga, Yasuaki

AU - Fujishima, Akira

AU - Wang, Xuemei

AU - Gu, Zhongze

PY - 2008/1

Y1 - 2008/1

N2 - The electrochemical oxidation of procaine hydrochloride (PC·HCL, 2-diethylaminoethyl 4-aminobenzoate hydrochloride) was investigated at as-deposited boron-doped diamond (ad-BDD) electrode, anodically oxidized BDD (aoBDD) electrode and glassy carbon (GC) electrode using cyclic voltammetry (CV). Well-defined cyclic voltammograms were obtained for PC·HCL oxidation with high signal-to-background (S/B) ratio, low tendency for adsorption, good reproducibility and long-term stability at ad-BDD electrode, demonstrating its superior electrochemical behavior and significant advantages in contrast to ao-BDD and GC electrode. At 100 μM PC·HCL, the voltammetric S/B ratio was nearly one order of magnitude higher at an ad-BDD electrode than that at a GC electrode. In a separate set of experiments for oxidation of 100 μM PC·HCL, 96%, 92% and 84% of the initial oxidation peak current was retained at the ad-BDD, ao-BDD and GC electrode, respectively, by stirring the solution after the tenth cycle. The current response was linearly proportional to the square root of the scan rate within the range 10-1000 mV s-1 in 10 μM PC·HCL solutions, indicating that the oxidation process was diffusion-controlled with negligible adsorption at an ad-BDD surface. The good linearity was observed for a concentration range from 5 to 200 μM with a linear equation of y = 0.03517x + 0.65346 (r = 0.999), and the detection limit was 0.5 μM for oxidation of PC·HCL at the adBDD electrode. The ad-BDD electrode could maintain 100% of its original activity after intermittent use for 3 months.

AB - The electrochemical oxidation of procaine hydrochloride (PC·HCL, 2-diethylaminoethyl 4-aminobenzoate hydrochloride) was investigated at as-deposited boron-doped diamond (ad-BDD) electrode, anodically oxidized BDD (aoBDD) electrode and glassy carbon (GC) electrode using cyclic voltammetry (CV). Well-defined cyclic voltammograms were obtained for PC·HCL oxidation with high signal-to-background (S/B) ratio, low tendency for adsorption, good reproducibility and long-term stability at ad-BDD electrode, demonstrating its superior electrochemical behavior and significant advantages in contrast to ao-BDD and GC electrode. At 100 μM PC·HCL, the voltammetric S/B ratio was nearly one order of magnitude higher at an ad-BDD electrode than that at a GC electrode. In a separate set of experiments for oxidation of 100 μM PC·HCL, 96%, 92% and 84% of the initial oxidation peak current was retained at the ad-BDD, ao-BDD and GC electrode, respectively, by stirring the solution after the tenth cycle. The current response was linearly proportional to the square root of the scan rate within the range 10-1000 mV s-1 in 10 μM PC·HCL solutions, indicating that the oxidation process was diffusion-controlled with negligible adsorption at an ad-BDD surface. The good linearity was observed for a concentration range from 5 to 200 μM with a linear equation of y = 0.03517x + 0.65346 (r = 0.999), and the detection limit was 0.5 μM for oxidation of PC·HCL at the adBDD electrode. The ad-BDD electrode could maintain 100% of its original activity after intermittent use for 3 months.

KW - Boron-doped diamond electrode

KW - Cyclic voltammetry

KW - Glassy carbon electrode

KW - Procaine hydrochloride

UR - http://www.scopus.com/inward/record.url?scp=38849174360&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=38849174360&partnerID=8YFLogxK

U2 - 10.1002/elan.200704024

DO - 10.1002/elan.200704024

M3 - Article

VL - 20

SP - 137

EP - 143

JO - Electroanalysis

JF - Electroanalysis

SN - 1040-0397

IS - 2

ER -