Comparison of various cyclic hardening models for notched C(T) specimen simulation under cyclic loading

Jong Min Lee, Hune Tae Kim, Yun Jae Kim, Jin Weon Kim

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

In this paper, simulations using various cyclic hardening models are performed to determine the effect of the hardening model that is used in a finite element analysis. Bi-linear, Armstrong-Frederick kinematic hardening model and Chaboche (third order non-linear) combined hardening model are used in finite element (FE) analysis to simulate material behavior under cyclic loading condition. Hardening parameters included in bilinear and non-linear hardening models are determined from monotonic stress-strain curve obtained from monotonic tensile test and parameters in Chaboche hardening model are determined from hysteresis loop obtained from cyclic tensile test. Simulation of notched C(T) test under cyclic loading is performed using three hardening models. Plastic strain, stress and plastic strain energy at notch tip of specimen are extracted from FE analysis results. Using energy based fatigue analysis, cycle to failure, the cycle at which crack initiation occurs at notch tip, are predicted and compared with experimental results. Through the comparisons, the effect of hardening model on the simulation result under cyclic load is confirmed.

Original languageEnglish
Title of host publicationDesign and Analysis
PublisherAmerican Society of Mechanical Engineers (ASME)
ISBN (Electronic)9780791851623
DOIs
Publication statusPublished - 2018 Jan 1
Externally publishedYes
EventASME 2018 Pressure Vessels and Piping Conference, PVP 2018 - Prague, Czech Republic
Duration: 2018 Jul 152018 Jul 20

Publication series

NameAmerican Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP
Volume3A
ISSN (Print)0277-027X

Conference

ConferenceASME 2018 Pressure Vessels and Piping Conference, PVP 2018
CountryCzech Republic
CityPrague
Period18/7/1518/7/20

Fingerprint

Hardening
Finite element method
Plastic deformation
Cyclic loads
Stress-strain curves
Hysteresis loops
Strain energy
Crack initiation
Kinematics
Fatigue of materials

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Lee, J. M., Kim, H. T., Kim, Y. J., & Kim, J. W. (2018). Comparison of various cyclic hardening models for notched C(T) specimen simulation under cyclic loading. In Design and Analysis (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; Vol. 3A). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/PVP2018-84579

Comparison of various cyclic hardening models for notched C(T) specimen simulation under cyclic loading. / Lee, Jong Min; Kim, Hune Tae; Kim, Yun Jae; Kim, Jin Weon.

Design and Analysis. American Society of Mechanical Engineers (ASME), 2018. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; Vol. 3A).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lee, JM, Kim, HT, Kim, YJ & Kim, JW 2018, Comparison of various cyclic hardening models for notched C(T) specimen simulation under cyclic loading. in Design and Analysis. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, vol. 3A, American Society of Mechanical Engineers (ASME), ASME 2018 Pressure Vessels and Piping Conference, PVP 2018, Prague, Czech Republic, 18/7/15. https://doi.org/10.1115/PVP2018-84579
Lee JM, Kim HT, Kim YJ, Kim JW. Comparison of various cyclic hardening models for notched C(T) specimen simulation under cyclic loading. In Design and Analysis. American Society of Mechanical Engineers (ASME). 2018. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP). https://doi.org/10.1115/PVP2018-84579
Lee, Jong Min ; Kim, Hune Tae ; Kim, Yun Jae ; Kim, Jin Weon. / Comparison of various cyclic hardening models for notched C(T) specimen simulation under cyclic loading. Design and Analysis. American Society of Mechanical Engineers (ASME), 2018. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP).
@inproceedings{a5773885a69244d5afdbb791052e015a,
title = "Comparison of various cyclic hardening models for notched C(T) specimen simulation under cyclic loading",
abstract = "In this paper, simulations using various cyclic hardening models are performed to determine the effect of the hardening model that is used in a finite element analysis. Bi-linear, Armstrong-Frederick kinematic hardening model and Chaboche (third order non-linear) combined hardening model are used in finite element (FE) analysis to simulate material behavior under cyclic loading condition. Hardening parameters included in bilinear and non-linear hardening models are determined from monotonic stress-strain curve obtained from monotonic tensile test and parameters in Chaboche hardening model are determined from hysteresis loop obtained from cyclic tensile test. Simulation of notched C(T) test under cyclic loading is performed using three hardening models. Plastic strain, stress and plastic strain energy at notch tip of specimen are extracted from FE analysis results. Using energy based fatigue analysis, cycle to failure, the cycle at which crack initiation occurs at notch tip, are predicted and compared with experimental results. Through the comparisons, the effect of hardening model on the simulation result under cyclic load is confirmed.",
author = "Lee, {Jong Min} and Kim, {Hune Tae} and Kim, {Yun Jae} and Kim, {Jin Weon}",
year = "2018",
month = "1",
day = "1",
doi = "10.1115/PVP2018-84579",
language = "English",
series = "American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP",
publisher = "American Society of Mechanical Engineers (ASME)",
booktitle = "Design and Analysis",

}

TY - GEN

T1 - Comparison of various cyclic hardening models for notched C(T) specimen simulation under cyclic loading

AU - Lee, Jong Min

AU - Kim, Hune Tae

AU - Kim, Yun Jae

AU - Kim, Jin Weon

PY - 2018/1/1

Y1 - 2018/1/1

N2 - In this paper, simulations using various cyclic hardening models are performed to determine the effect of the hardening model that is used in a finite element analysis. Bi-linear, Armstrong-Frederick kinematic hardening model and Chaboche (third order non-linear) combined hardening model are used in finite element (FE) analysis to simulate material behavior under cyclic loading condition. Hardening parameters included in bilinear and non-linear hardening models are determined from monotonic stress-strain curve obtained from monotonic tensile test and parameters in Chaboche hardening model are determined from hysteresis loop obtained from cyclic tensile test. Simulation of notched C(T) test under cyclic loading is performed using three hardening models. Plastic strain, stress and plastic strain energy at notch tip of specimen are extracted from FE analysis results. Using energy based fatigue analysis, cycle to failure, the cycle at which crack initiation occurs at notch tip, are predicted and compared with experimental results. Through the comparisons, the effect of hardening model on the simulation result under cyclic load is confirmed.

AB - In this paper, simulations using various cyclic hardening models are performed to determine the effect of the hardening model that is used in a finite element analysis. Bi-linear, Armstrong-Frederick kinematic hardening model and Chaboche (third order non-linear) combined hardening model are used in finite element (FE) analysis to simulate material behavior under cyclic loading condition. Hardening parameters included in bilinear and non-linear hardening models are determined from monotonic stress-strain curve obtained from monotonic tensile test and parameters in Chaboche hardening model are determined from hysteresis loop obtained from cyclic tensile test. Simulation of notched C(T) test under cyclic loading is performed using three hardening models. Plastic strain, stress and plastic strain energy at notch tip of specimen are extracted from FE analysis results. Using energy based fatigue analysis, cycle to failure, the cycle at which crack initiation occurs at notch tip, are predicted and compared with experimental results. Through the comparisons, the effect of hardening model on the simulation result under cyclic load is confirmed.

UR - http://www.scopus.com/inward/record.url?scp=85056889575&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85056889575&partnerID=8YFLogxK

U2 - 10.1115/PVP2018-84579

DO - 10.1115/PVP2018-84579

M3 - Conference contribution

T3 - American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

BT - Design and Analysis

PB - American Society of Mechanical Engineers (ASME)

ER -