Connection design for motion control system

Mitsuharu Morisawa, Kouhei Ohnishi

Research output: Contribution to conferencePaper

4 Citations (Scopus)

Abstract

Up to now, much effort has been concentrated on the control of a single control of motion system. However future machine or robots will be spread out in our society and they will make their motion in an open environment. Since such an environment has a lot of modes, a design methodology of motion controller for such motion system is required. At first, the paper shows a novel viewpoint to abstract the modes from environment. Two examples of an abstraction using Hadamard matrix are shown. One is a friction-free drive and the other is a control of a paddle foot. Modal transmission from environment to the final motion should change adaptively according to the situation. If the system becomes complex, it is necessary to design the variable network from the modes to the motion via motion controllers. The paper secondarily shows a methodology to design the network of the motion system based on the hard real-time manner. Connection matrix and reachable matrix are used for the design of variable network. Since the total performance of the motion system depends on the performance of a single motion controller, thirdly a design method for the robust control with the feedforward loop is proposed. There are numerical and experimental examples in the paper. They show the viability of novel approach to the complex motion.

Original languageEnglish
Pages28-33
Number of pages6
Publication statusPublished - 2002 Dec 1
Event7th International Workshop on Advanced Motion Control, AMC '02 - Proceedings - Maribor, Slovenia
Duration: 2002 Jul 32002 Jul 5

Other

Other7th International Workshop on Advanced Motion Control, AMC '02 - Proceedings
CountrySlovenia
CityMaribor
Period02/7/302/7/5

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Modelling and Simulation
  • Computer Science Applications
  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'Connection design for motion control system'. Together they form a unique fingerprint.

  • Cite this

    Morisawa, M., & Ohnishi, K. (2002). Connection design for motion control system. 28-33. Paper presented at 7th International Workshop on Advanced Motion Control, AMC '02 - Proceedings, Maribor, Slovenia.