Constraint effects in ductile fracture on J-resistance curve for full-scale cracked pipes and fracture toughness testing specimens

Jae Jun Han, Yun Jae Kim, R. A. Ainsworth

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Abstract

Fracture toughness is an important quantity in structural integrity assessment of pressurised vessels and piping. This paper reports J resistance (J-R) curves for toughness test specimens and full-scale pipes with a circumferential crack in a carbon steel. Full-scale pipes with a circumferential crack subjected to four-point bending are investigated with single edge-notched-tension specimens, SE(T), under fixed grip and pin-loaded conditions and compact tension, C(T), fracture toughness test specimens. Finite element (FE) damage analyses based on a stress-modified fracture strain model are used to simulate ductile fracture. An element-size-dependent critical damage model is introduced and applied to the large-scale components. Fracture parameter J values are calculated using both experimental data and FE analysis. In the first part of this paper, experimental results performed by Battelle Memorial Institute are compared with results from FE simulations to gain confidence in the ductile fracture simulation. Subsequently, different types of fracture toughness tests and thickness variations are considered to address the effect of in-plane and out-of plane constraint, respectively. Also, pipe geometries and crack depth are varied systematically. In conclusion, the transferability of J-R curves from toughness test specimens to full-scale cracked pipes is discussed.

Original languageEnglish
Title of host publicationHigh-Pressure Technology; ASME NDE Division; 22nd Scavuzzo Student Paper Symposium and Competition
PublisherAmerican Society of Mechanical Engineers (ASME)
ISBN (Electronic)9780791846025
DOIs
Publication statusPublished - 2014 Jan 1
Externally publishedYes
EventASME 2014 Pressure Vessels and Piping Conference, PVP 2014 - Anaheim, United States
Duration: 2014 Jul 202014 Jul 24

Publication series

NameAmerican Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP
Volume5
ISSN (Print)0277-027X

Conference

ConferenceASME 2014 Pressure Vessels and Piping Conference, PVP 2014
CountryUnited States
CityAnaheim
Period14/7/2014/7/24

Fingerprint

Ductile fracture
Fracture toughness
Pipe
Testing
Cracks
Toughness
Structural integrity
Carbon steel
Finite element method
Geometry

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Han, J. J., Kim, Y. J., & Ainsworth, R. A. (2014). Constraint effects in ductile fracture on J-resistance curve for full-scale cracked pipes and fracture toughness testing specimens. In High-Pressure Technology; ASME NDE Division; 22nd Scavuzzo Student Paper Symposium and Competition (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; Vol. 5). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/PVP2014-28903

Constraint effects in ductile fracture on J-resistance curve for full-scale cracked pipes and fracture toughness testing specimens. / Han, Jae Jun; Kim, Yun Jae; Ainsworth, R. A.

High-Pressure Technology; ASME NDE Division; 22nd Scavuzzo Student Paper Symposium and Competition. American Society of Mechanical Engineers (ASME), 2014. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; Vol. 5).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Han, JJ, Kim, YJ & Ainsworth, RA 2014, Constraint effects in ductile fracture on J-resistance curve for full-scale cracked pipes and fracture toughness testing specimens. in High-Pressure Technology; ASME NDE Division; 22nd Scavuzzo Student Paper Symposium and Competition. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, vol. 5, American Society of Mechanical Engineers (ASME), ASME 2014 Pressure Vessels and Piping Conference, PVP 2014, Anaheim, United States, 14/7/20. https://doi.org/10.1115/PVP2014-28903
Han JJ, Kim YJ, Ainsworth RA. Constraint effects in ductile fracture on J-resistance curve for full-scale cracked pipes and fracture toughness testing specimens. In High-Pressure Technology; ASME NDE Division; 22nd Scavuzzo Student Paper Symposium and Competition. American Society of Mechanical Engineers (ASME). 2014. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP). https://doi.org/10.1115/PVP2014-28903
Han, Jae Jun ; Kim, Yun Jae ; Ainsworth, R. A. / Constraint effects in ductile fracture on J-resistance curve for full-scale cracked pipes and fracture toughness testing specimens. High-Pressure Technology; ASME NDE Division; 22nd Scavuzzo Student Paper Symposium and Competition. American Society of Mechanical Engineers (ASME), 2014. (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP).
@inproceedings{89f343c8c5da452a8b10c3bb7247edb3,
title = "Constraint effects in ductile fracture on J-resistance curve for full-scale cracked pipes and fracture toughness testing specimens",
abstract = "Fracture toughness is an important quantity in structural integrity assessment of pressurised vessels and piping. This paper reports J resistance (J-R) curves for toughness test specimens and full-scale pipes with a circumferential crack in a carbon steel. Full-scale pipes with a circumferential crack subjected to four-point bending are investigated with single edge-notched-tension specimens, SE(T), under fixed grip and pin-loaded conditions and compact tension, C(T), fracture toughness test specimens. Finite element (FE) damage analyses based on a stress-modified fracture strain model are used to simulate ductile fracture. An element-size-dependent critical damage model is introduced and applied to the large-scale components. Fracture parameter J values are calculated using both experimental data and FE analysis. In the first part of this paper, experimental results performed by Battelle Memorial Institute are compared with results from FE simulations to gain confidence in the ductile fracture simulation. Subsequently, different types of fracture toughness tests and thickness variations are considered to address the effect of in-plane and out-of plane constraint, respectively. Also, pipe geometries and crack depth are varied systematically. In conclusion, the transferability of J-R curves from toughness test specimens to full-scale cracked pipes is discussed.",
author = "Han, {Jae Jun} and Kim, {Yun Jae} and Ainsworth, {R. A.}",
year = "2014",
month = "1",
day = "1",
doi = "10.1115/PVP2014-28903",
language = "English",
series = "American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP",
publisher = "American Society of Mechanical Engineers (ASME)",
booktitle = "High-Pressure Technology; ASME NDE Division; 22nd Scavuzzo Student Paper Symposium and Competition",

}

TY - GEN

T1 - Constraint effects in ductile fracture on J-resistance curve for full-scale cracked pipes and fracture toughness testing specimens

AU - Han, Jae Jun

AU - Kim, Yun Jae

AU - Ainsworth, R. A.

PY - 2014/1/1

Y1 - 2014/1/1

N2 - Fracture toughness is an important quantity in structural integrity assessment of pressurised vessels and piping. This paper reports J resistance (J-R) curves for toughness test specimens and full-scale pipes with a circumferential crack in a carbon steel. Full-scale pipes with a circumferential crack subjected to four-point bending are investigated with single edge-notched-tension specimens, SE(T), under fixed grip and pin-loaded conditions and compact tension, C(T), fracture toughness test specimens. Finite element (FE) damage analyses based on a stress-modified fracture strain model are used to simulate ductile fracture. An element-size-dependent critical damage model is introduced and applied to the large-scale components. Fracture parameter J values are calculated using both experimental data and FE analysis. In the first part of this paper, experimental results performed by Battelle Memorial Institute are compared with results from FE simulations to gain confidence in the ductile fracture simulation. Subsequently, different types of fracture toughness tests and thickness variations are considered to address the effect of in-plane and out-of plane constraint, respectively. Also, pipe geometries and crack depth are varied systematically. In conclusion, the transferability of J-R curves from toughness test specimens to full-scale cracked pipes is discussed.

AB - Fracture toughness is an important quantity in structural integrity assessment of pressurised vessels and piping. This paper reports J resistance (J-R) curves for toughness test specimens and full-scale pipes with a circumferential crack in a carbon steel. Full-scale pipes with a circumferential crack subjected to four-point bending are investigated with single edge-notched-tension specimens, SE(T), under fixed grip and pin-loaded conditions and compact tension, C(T), fracture toughness test specimens. Finite element (FE) damage analyses based on a stress-modified fracture strain model are used to simulate ductile fracture. An element-size-dependent critical damage model is introduced and applied to the large-scale components. Fracture parameter J values are calculated using both experimental data and FE analysis. In the first part of this paper, experimental results performed by Battelle Memorial Institute are compared with results from FE simulations to gain confidence in the ductile fracture simulation. Subsequently, different types of fracture toughness tests and thickness variations are considered to address the effect of in-plane and out-of plane constraint, respectively. Also, pipe geometries and crack depth are varied systematically. In conclusion, the transferability of J-R curves from toughness test specimens to full-scale cracked pipes is discussed.

UR - http://www.scopus.com/inward/record.url?scp=84911882942&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84911882942&partnerID=8YFLogxK

U2 - 10.1115/PVP2014-28903

DO - 10.1115/PVP2014-28903

M3 - Conference contribution

AN - SCOPUS:84911882942

T3 - American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP

BT - High-Pressure Technology; ASME NDE Division; 22nd Scavuzzo Student Paper Symposium and Competition

PB - American Society of Mechanical Engineers (ASME)

ER -