Control design based on reachability matrix for realization of independent operation in multilateral system

Tomoki Kono, Seiichiro Katsura

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

This paper proposes a design method of multilateral system based on reachability matrix for independent operation. A multilateral system is a one of the haptic transmission control, which is extended structure of bilateral control. If the multilateral system consists of many master system and one slave system, many human can obtain the haptic information of an environment through a slave system. However, a conventional multilateral system is that independent operation of master system is difficult because of same response of all master system. Therefore, the proposed method is focused on direct and indirect connection of subsystem. Specifically, design of subsystem connection which is satisfied desired performance is based on a reachability matrix and a digraph is derived by the reachability matrix. This research aims to construct multilateral system realizing independent operation and to transmit a haptic information from slave system. By using proposed method, the desired multilateral control that many human can operate independently can be realized. The validity of the proposed method is confirmed through the experiments.

Original languageEnglish
Title of host publication2016 IEEE 14th International Workshop on Advanced Motion Control, AMC 2016
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages85-90
Number of pages6
ISBN (Electronic)9781479984640
DOIs
Publication statusPublished - 2016 Jun 20
Event14th IEEE International Workshop on Advanced Motion Control, AMC 2016 - Auckland, New Zealand
Duration: 2016 Apr 222016 Apr 24

Other

Other14th IEEE International Workshop on Advanced Motion Control, AMC 2016
CountryNew Zealand
CityAuckland
Period16/4/2216/4/24

ASJC Scopus subject areas

  • Control and Systems Engineering

Fingerprint Dive into the research topics of 'Control design based on reachability matrix for realization of independent operation in multilateral system'. Together they form a unique fingerprint.

  • Cite this

    Kono, T., & Katsura, S. (2016). Control design based on reachability matrix for realization of independent operation in multilateral system. In 2016 IEEE 14th International Workshop on Advanced Motion Control, AMC 2016 (pp. 85-90). [7496332] Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/AMC.2016.7496332