Control of thermal conductance with detection of single contacting part for rendering thermal sensation

Yukiko Osawa, Hidetaka Morimitsu, Seiichiro Katsura

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

The rendering of tactile sensations has recently been attracting attention in the fields of multimedia and communication. This study focuses on thermal sensation, which is one of the important elements for rendering a tactile sensation. Humans feel an object by hand movements such as tracing, grasping, and stroking. In response to such movements, it is necessary to take into account the change in the contacting point on the system. However, most conventional studies on thermal rendering did not take such situations into account in their system design. This study aims to fill this gap by proposing a control method for reproducing thermal conductance with the detection of a single contacting part. In this study, a copper plate attached to a Peltier device is regarded as a thermal system, and the system is modeled with three parts. Heat disturbance observers and heat inflow observers are then allocated to each part, and the thermal conductance at any single part is virtually reproduced. Moreover, a detection method of single contacting part is introduced in the proposed system. Combining the detection method with the controller enables different thermal sensations to be rendered depending on the contacting part.

Original languageEnglish
Pages (from-to)101-107
Number of pages7
JournalIEEJ Journal of Industry Applications
Volume5
Issue number2
DOIs
Publication statusPublished - 2016

Fingerprint

Hot Temperature
Systems analysis
Copper
Controllers
Communication

Keywords

  • Haptics
  • Peltier device
  • Temperature distribution
  • Thermal sensation

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Automotive Engineering
  • Electrical and Electronic Engineering
  • Industrial and Manufacturing Engineering
  • Mechanical Engineering

Cite this

Control of thermal conductance with detection of single contacting part for rendering thermal sensation. / Osawa, Yukiko; Morimitsu, Hidetaka; Katsura, Seiichiro.

In: IEEJ Journal of Industry Applications, Vol. 5, No. 2, 2016, p. 101-107.

Research output: Contribution to journalArticle

@article{06b3510e0d21440ead260450ffc81f2e,
title = "Control of thermal conductance with detection of single contacting part for rendering thermal sensation",
abstract = "The rendering of tactile sensations has recently been attracting attention in the fields of multimedia and communication. This study focuses on thermal sensation, which is one of the important elements for rendering a tactile sensation. Humans feel an object by hand movements such as tracing, grasping, and stroking. In response to such movements, it is necessary to take into account the change in the contacting point on the system. However, most conventional studies on thermal rendering did not take such situations into account in their system design. This study aims to fill this gap by proposing a control method for reproducing thermal conductance with the detection of a single contacting part. In this study, a copper plate attached to a Peltier device is regarded as a thermal system, and the system is modeled with three parts. Heat disturbance observers and heat inflow observers are then allocated to each part, and the thermal conductance at any single part is virtually reproduced. Moreover, a detection method of single contacting part is introduced in the proposed system. Combining the detection method with the controller enables different thermal sensations to be rendered depending on the contacting part.",
keywords = "Haptics, Peltier device, Temperature distribution, Thermal sensation",
author = "Yukiko Osawa and Hidetaka Morimitsu and Seiichiro Katsura",
year = "2016",
doi = "10.1541/ieejjia.5.101",
language = "English",
volume = "5",
pages = "101--107",
journal = "IEEJ Journal of Industry Applications",
issn = "2187-1094",
publisher = "The Institute of Electrical Engineers of Japan",
number = "2",

}

TY - JOUR

T1 - Control of thermal conductance with detection of single contacting part for rendering thermal sensation

AU - Osawa, Yukiko

AU - Morimitsu, Hidetaka

AU - Katsura, Seiichiro

PY - 2016

Y1 - 2016

N2 - The rendering of tactile sensations has recently been attracting attention in the fields of multimedia and communication. This study focuses on thermal sensation, which is one of the important elements for rendering a tactile sensation. Humans feel an object by hand movements such as tracing, grasping, and stroking. In response to such movements, it is necessary to take into account the change in the contacting point on the system. However, most conventional studies on thermal rendering did not take such situations into account in their system design. This study aims to fill this gap by proposing a control method for reproducing thermal conductance with the detection of a single contacting part. In this study, a copper plate attached to a Peltier device is regarded as a thermal system, and the system is modeled with three parts. Heat disturbance observers and heat inflow observers are then allocated to each part, and the thermal conductance at any single part is virtually reproduced. Moreover, a detection method of single contacting part is introduced in the proposed system. Combining the detection method with the controller enables different thermal sensations to be rendered depending on the contacting part.

AB - The rendering of tactile sensations has recently been attracting attention in the fields of multimedia and communication. This study focuses on thermal sensation, which is one of the important elements for rendering a tactile sensation. Humans feel an object by hand movements such as tracing, grasping, and stroking. In response to such movements, it is necessary to take into account the change in the contacting point on the system. However, most conventional studies on thermal rendering did not take such situations into account in their system design. This study aims to fill this gap by proposing a control method for reproducing thermal conductance with the detection of a single contacting part. In this study, a copper plate attached to a Peltier device is regarded as a thermal system, and the system is modeled with three parts. Heat disturbance observers and heat inflow observers are then allocated to each part, and the thermal conductance at any single part is virtually reproduced. Moreover, a detection method of single contacting part is introduced in the proposed system. Combining the detection method with the controller enables different thermal sensations to be rendered depending on the contacting part.

KW - Haptics

KW - Peltier device

KW - Temperature distribution

KW - Thermal sensation

UR - http://www.scopus.com/inward/record.url?scp=85010041078&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85010041078&partnerID=8YFLogxK

U2 - 10.1541/ieejjia.5.101

DO - 10.1541/ieejjia.5.101

M3 - Article

VL - 5

SP - 101

EP - 107

JO - IEEJ Journal of Industry Applications

JF - IEEJ Journal of Industry Applications

SN - 2187-1094

IS - 2

ER -