Crystallization and sintering behavior of PZT prepared from metal alkoxides

S. Tursiloadi, Hiroaki Imai, H. Hirashima

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Powder precipitates and monolithic gels of lead zirconate-titanate (PZT) were prepared by hydrolysis of metal alkoxides in 1-propanol and acetylacetone/1-propanol solutions, respectively. The as-dried precipitates and gels were amorphous. Deposition of pyrochlore and perovskite at a relatively low temperature, 450°C, was observed for both the precipitate and gel. However, crystalline PbO was found in the gels heated at 300°C. The results showed that the homogeneity of the powder precipitate was better than that of the gel. After heating at 600°C, the diffraction peaks of only perovskite were found for both samples. Powder-compacts and gel compacts were sintered at temperatures higher than 900°C. The shrinkage of the gel-compacts after sintering was greater than that of the powder-compacts because of its small particle size.

Original languageEnglish
Pages (from-to)1069-1072
Number of pages4
JournalYogyo Kyokai Shi/Journal of the Ceramic Society of Japan
Volume103
Issue number10
Publication statusPublished - 1995

Fingerprint

alkoxides
Crystallization
sintering
Sintering
Gels
Metals
gels
crystallization
Powders
Precipitates
precipitates
metals
1-Propanol
Propanol
Perovskite
acetylacetone
shrinkage
homogeneity
hydrolysis
Hydrolysis

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Crystallization and sintering behavior of PZT prepared from metal alkoxides. / Tursiloadi, S.; Imai, Hiroaki; Hirashima, H.

In: Yogyo Kyokai Shi/Journal of the Ceramic Society of Japan, Vol. 103, No. 10, 1995, p. 1069-1072.

Research output: Contribution to journalArticle

@article{56e0e4022bb040ce93acb2e959916e69,
title = "Crystallization and sintering behavior of PZT prepared from metal alkoxides",
abstract = "Powder precipitates and monolithic gels of lead zirconate-titanate (PZT) were prepared by hydrolysis of metal alkoxides in 1-propanol and acetylacetone/1-propanol solutions, respectively. The as-dried precipitates and gels were amorphous. Deposition of pyrochlore and perovskite at a relatively low temperature, 450°C, was observed for both the precipitate and gel. However, crystalline PbO was found in the gels heated at 300°C. The results showed that the homogeneity of the powder precipitate was better than that of the gel. After heating at 600°C, the diffraction peaks of only perovskite were found for both samples. Powder-compacts and gel compacts were sintered at temperatures higher than 900°C. The shrinkage of the gel-compacts after sintering was greater than that of the powder-compacts because of its small particle size.",
author = "S. Tursiloadi and Hiroaki Imai and H. Hirashima",
year = "1995",
language = "English",
volume = "103",
pages = "1069--1072",
journal = "Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan",
issn = "0914-5400",
publisher = "Ceramic Society of Japan/Nippon Seramikkusu Kyokai",
number = "10",

}

TY - JOUR

T1 - Crystallization and sintering behavior of PZT prepared from metal alkoxides

AU - Tursiloadi, S.

AU - Imai, Hiroaki

AU - Hirashima, H.

PY - 1995

Y1 - 1995

N2 - Powder precipitates and monolithic gels of lead zirconate-titanate (PZT) were prepared by hydrolysis of metal alkoxides in 1-propanol and acetylacetone/1-propanol solutions, respectively. The as-dried precipitates and gels were amorphous. Deposition of pyrochlore and perovskite at a relatively low temperature, 450°C, was observed for both the precipitate and gel. However, crystalline PbO was found in the gels heated at 300°C. The results showed that the homogeneity of the powder precipitate was better than that of the gel. After heating at 600°C, the diffraction peaks of only perovskite were found for both samples. Powder-compacts and gel compacts were sintered at temperatures higher than 900°C. The shrinkage of the gel-compacts after sintering was greater than that of the powder-compacts because of its small particle size.

AB - Powder precipitates and monolithic gels of lead zirconate-titanate (PZT) were prepared by hydrolysis of metal alkoxides in 1-propanol and acetylacetone/1-propanol solutions, respectively. The as-dried precipitates and gels were amorphous. Deposition of pyrochlore and perovskite at a relatively low temperature, 450°C, was observed for both the precipitate and gel. However, crystalline PbO was found in the gels heated at 300°C. The results showed that the homogeneity of the powder precipitate was better than that of the gel. After heating at 600°C, the diffraction peaks of only perovskite were found for both samples. Powder-compacts and gel compacts were sintered at temperatures higher than 900°C. The shrinkage of the gel-compacts after sintering was greater than that of the powder-compacts because of its small particle size.

UR - http://www.scopus.com/inward/record.url?scp=0029425693&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0029425693&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0029425693

VL - 103

SP - 1069

EP - 1072

JO - Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan

JF - Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan

SN - 0914-5400

IS - 10

ER -