Decoupling strategy for position and force control based on modal space disturbance observer

Takahiro Nozaki, Takahiro Mizoguchi, Kouhei Ohnishi

Research output: Contribution to journalArticle

42 Citations (Scopus)

Abstract

This paper extends the diagonalization method on the basis of the modal space disturbance observer (MDOB) for application to a multidegree-of-freedom (DOF) system. The aim of this method is to suppress the interference between the position and force control systems and realize a bilateral control system. The utility of the proposed method is experimentally verified by using a multi-DOF manipulator. It is confirmed that the MDOB-based decoupling method has better performance than oblique coordinate control. Conventional oblique coordinate control causes oscillation in cases where the modeling error is large and the cutoff frequency of an observer is not high enough to change the system dynamics. On the other hand, the MDOB-based decoupling method becomes unstable when the difference in mass is large.

Original languageEnglish
Article number6519317
Pages (from-to)1022-1032
Number of pages11
JournalIEEE Transactions on Industrial Electronics
Volume61
Issue number2
DOIs
Publication statusPublished - 2014

Fingerprint

Force control
Position control
Control systems
Cutoff frequency
Manipulators
Dynamical systems

Keywords

  • Acceleration control
  • bilateral control
  • disturbance observer (DOB)
  • haptics
  • master-slave robot system
  • motion control

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Control and Systems Engineering
  • Computer Science Applications

Cite this

Decoupling strategy for position and force control based on modal space disturbance observer. / Nozaki, Takahiro; Mizoguchi, Takahiro; Ohnishi, Kouhei.

In: IEEE Transactions on Industrial Electronics, Vol. 61, No. 2, 6519317, 2014, p. 1022-1032.

Research output: Contribution to journalArticle

@article{f782661ab972410d8e5952b3fdd0add7,
title = "Decoupling strategy for position and force control based on modal space disturbance observer",
abstract = "This paper extends the diagonalization method on the basis of the modal space disturbance observer (MDOB) for application to a multidegree-of-freedom (DOF) system. The aim of this method is to suppress the interference between the position and force control systems and realize a bilateral control system. The utility of the proposed method is experimentally verified by using a multi-DOF manipulator. It is confirmed that the MDOB-based decoupling method has better performance than oblique coordinate control. Conventional oblique coordinate control causes oscillation in cases where the modeling error is large and the cutoff frequency of an observer is not high enough to change the system dynamics. On the other hand, the MDOB-based decoupling method becomes unstable when the difference in mass is large.",
keywords = "Acceleration control, bilateral control, disturbance observer (DOB), haptics, master-slave robot system, motion control",
author = "Takahiro Nozaki and Takahiro Mizoguchi and Kouhei Ohnishi",
year = "2014",
doi = "10.1109/TIE.2013.2264788",
language = "English",
volume = "61",
pages = "1022--1032",
journal = "IEEE Transactions on Industrial Electronics",
issn = "0278-0046",
publisher = "IEEE Industrial Electronics Society",
number = "2",

}

TY - JOUR

T1 - Decoupling strategy for position and force control based on modal space disturbance observer

AU - Nozaki, Takahiro

AU - Mizoguchi, Takahiro

AU - Ohnishi, Kouhei

PY - 2014

Y1 - 2014

N2 - This paper extends the diagonalization method on the basis of the modal space disturbance observer (MDOB) for application to a multidegree-of-freedom (DOF) system. The aim of this method is to suppress the interference between the position and force control systems and realize a bilateral control system. The utility of the proposed method is experimentally verified by using a multi-DOF manipulator. It is confirmed that the MDOB-based decoupling method has better performance than oblique coordinate control. Conventional oblique coordinate control causes oscillation in cases where the modeling error is large and the cutoff frequency of an observer is not high enough to change the system dynamics. On the other hand, the MDOB-based decoupling method becomes unstable when the difference in mass is large.

AB - This paper extends the diagonalization method on the basis of the modal space disturbance observer (MDOB) for application to a multidegree-of-freedom (DOF) system. The aim of this method is to suppress the interference between the position and force control systems and realize a bilateral control system. The utility of the proposed method is experimentally verified by using a multi-DOF manipulator. It is confirmed that the MDOB-based decoupling method has better performance than oblique coordinate control. Conventional oblique coordinate control causes oscillation in cases where the modeling error is large and the cutoff frequency of an observer is not high enough to change the system dynamics. On the other hand, the MDOB-based decoupling method becomes unstable when the difference in mass is large.

KW - Acceleration control

KW - bilateral control

KW - disturbance observer (DOB)

KW - haptics

KW - master-slave robot system

KW - motion control

UR - http://www.scopus.com/inward/record.url?scp=84882932904&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84882932904&partnerID=8YFLogxK

U2 - 10.1109/TIE.2013.2264788

DO - 10.1109/TIE.2013.2264788

M3 - Article

VL - 61

SP - 1022

EP - 1032

JO - IEEE Transactions on Industrial Electronics

JF - IEEE Transactions on Industrial Electronics

SN - 0278-0046

IS - 2

M1 - 6519317

ER -