Development and evaluation of capacitance detection ASIC for three-axis common electrode type capacitive accelerometer

Yoshinori Matsumoto, Shoji Kawahito, Makoto Ishida

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

A capacitance detection CMOS ASIC has been developed for three-axis common electrode type capacitive accelerometers. The ASIC contains an analog output switched capacitor circuit and a digital output 2nd order delta-sigma modulator. The circuits were driven by three or six phase clocks for three-axis detection. The characteristics of the circuits were evaluated by a variable capacitor and a three-axis capacitive accelerometer. A novel compensation method was proposed to reduce the sensitivity dependence on Z-axis acceleration. The three-axis output voltages of the switched capacitor circuits were proportional to three-axis accelerations. The offset and sensitivity of the 2nd order delta-sigma modulator can be calibrated by outer voltages. The sensitivities of 1.5V/G and 20kHz/G were obtained respectively when the circuits were combined with a commercial available three-axis capacitive accelerometer.

Original languageEnglish
Pages (from-to)135-141
Number of pages7
Journalieej transactions on sensors and micromachines
Volume121
Issue number3
DOIs
Publication statusPublished - 2001 Jan 1

    Fingerprint

Keywords

  • CMOS
  • delta-sigma modulator
  • detection circuit
  • switched capacitor
  • three-axis accelerometer

ASJC Scopus subject areas

  • Mechanical Engineering
  • Electrical and Electronic Engineering

Cite this