DEVELOPMENT OF THE ELLIPTIC BALL-END-MILL.

Hideki Aoyama, Takeshi Kishinami, Katsumasa Saito

Research output: Contribution to journalArticle

17 Citations (Scopus)

Abstract

A new type of the elliptic ball-end-mill is proposed to simplify the regrinding operation of the cutting edge. This ball-end-mill has an elliptic surface as a rake face and a suitable inclination plane as a clearance face or a rake face. This article reports the method of forming this ball-end-mill and some experiments to test its performance in terms of cutting force and chip formation.

Original languageEnglish
Pages (from-to)291-293
Number of pages3
JournalBulletin of the Japan Society of Precision Engineering
Volume20
Issue number4
Publication statusPublished - 1986 Dec
Externally publishedYes

Fingerprint

Experiments

ASJC Scopus subject areas

  • Engineering(all)

Cite this

DEVELOPMENT OF THE ELLIPTIC BALL-END-MILL. / Aoyama, Hideki; Kishinami, Takeshi; Saito, Katsumasa.

In: Bulletin of the Japan Society of Precision Engineering, Vol. 20, No. 4, 12.1986, p. 291-293.

Research output: Contribution to journalArticle

Aoyama, Hideki ; Kishinami, Takeshi ; Saito, Katsumasa. / DEVELOPMENT OF THE ELLIPTIC BALL-END-MILL. In: Bulletin of the Japan Society of Precision Engineering. 1986 ; Vol. 20, No. 4. pp. 291-293.
@article{0bb09db0e7224e0cb66cfc053a5e42a7,
title = "DEVELOPMENT OF THE ELLIPTIC BALL-END-MILL.",
abstract = "A new type of the elliptic ball-end-mill is proposed to simplify the regrinding operation of the cutting edge. This ball-end-mill has an elliptic surface as a rake face and a suitable inclination plane as a clearance face or a rake face. This article reports the method of forming this ball-end-mill and some experiments to test its performance in terms of cutting force and chip formation.",
author = "Hideki Aoyama and Takeshi Kishinami and Katsumasa Saito",
year = "1986",
month = "12",
language = "English",
volume = "20",
pages = "291--293",
journal = "Bulletin of the Japan Society of Precision Engineering",
issn = "0582-4206",
publisher = "Japan Society for Precision Engineering",
number = "4",

}

TY - JOUR

T1 - DEVELOPMENT OF THE ELLIPTIC BALL-END-MILL.

AU - Aoyama, Hideki

AU - Kishinami, Takeshi

AU - Saito, Katsumasa

PY - 1986/12

Y1 - 1986/12

N2 - A new type of the elliptic ball-end-mill is proposed to simplify the regrinding operation of the cutting edge. This ball-end-mill has an elliptic surface as a rake face and a suitable inclination plane as a clearance face or a rake face. This article reports the method of forming this ball-end-mill and some experiments to test its performance in terms of cutting force and chip formation.

AB - A new type of the elliptic ball-end-mill is proposed to simplify the regrinding operation of the cutting edge. This ball-end-mill has an elliptic surface as a rake face and a suitable inclination plane as a clearance face or a rake face. This article reports the method of forming this ball-end-mill and some experiments to test its performance in terms of cutting force and chip formation.

UR - http://www.scopus.com/inward/record.url?scp=0022929104&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0022929104&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0022929104

VL - 20

SP - 291

EP - 293

JO - Bulletin of the Japan Society of Precision Engineering

JF - Bulletin of the Japan Society of Precision Engineering

SN - 0582-4206

IS - 4

ER -