Digital quasi-impulse shaping for multi-level QAM and QPRS systems

Iwao Sasase, Li Jinxing, Kamilo Feher

Research output: Contribution to journalArticle

Abstract

Digital quasi-impulse-shaped signals for the transmission of Nyquist-shaped raised-cosine filtered signals and partial response signals are considered. Quasi-impulse signals do not require conventionally used phase-equalized x/sin(x)-shaped aperture equalizers. A simple logic circuit reduces the pulse-width of the conventional NRZ format, binary or multi-level input data. The finite pulse-width duration of these signals, as compared with the theoretically infinite impulse duration, permits a practical realization with negligible performance degradation. Experimental and computer simulation results demonstrate that pulse-widths of 25% for 225-QPRS class I, 18.75% for 64-QAM and 12.5% for 256-QAM lead to a performance degradation of only 0.2 dB at a Pe = 10-8.

Original languageEnglish
Pages (from-to)31-34
Number of pages4
JournalCanadian Journal of Electrical and Computer Engineering
Volume14
Issue number1
Publication statusPublished - 1989

Fingerprint

Quadrature amplitude modulation
Degradation
Logic circuits
Equalizers
Computer simulation

ASJC Scopus subject areas

  • Hardware and Architecture
  • Electrical and Electronic Engineering

Cite this

Digital quasi-impulse shaping for multi-level QAM and QPRS systems. / Sasase, Iwao; Jinxing, Li; Feher, Kamilo.

In: Canadian Journal of Electrical and Computer Engineering, Vol. 14, No. 1, 1989, p. 31-34.

Research output: Contribution to journalArticle

@article{194db8f74180435d98da315a76e69322,
title = "Digital quasi-impulse shaping for multi-level QAM and QPRS systems",
abstract = "Digital quasi-impulse-shaped signals for the transmission of Nyquist-shaped raised-cosine filtered signals and partial response signals are considered. Quasi-impulse signals do not require conventionally used phase-equalized x/sin(x)-shaped aperture equalizers. A simple logic circuit reduces the pulse-width of the conventional NRZ format, binary or multi-level input data. The finite pulse-width duration of these signals, as compared with the theoretically infinite impulse duration, permits a practical realization with negligible performance degradation. Experimental and computer simulation results demonstrate that pulse-widths of 25{\%} for 225-QPRS class I, 18.75{\%} for 64-QAM and 12.5{\%} for 256-QAM lead to a performance degradation of only 0.2 dB at a Pe = 10-8.",
author = "Iwao Sasase and Li Jinxing and Kamilo Feher",
year = "1989",
language = "English",
volume = "14",
pages = "31--34",
journal = "Canadian Journal of Electrical and Computer Engineering",
issn = "0840-8688",
publisher = "IEEE Canada",
number = "1",

}

TY - JOUR

T1 - Digital quasi-impulse shaping for multi-level QAM and QPRS systems

AU - Sasase, Iwao

AU - Jinxing, Li

AU - Feher, Kamilo

PY - 1989

Y1 - 1989

N2 - Digital quasi-impulse-shaped signals for the transmission of Nyquist-shaped raised-cosine filtered signals and partial response signals are considered. Quasi-impulse signals do not require conventionally used phase-equalized x/sin(x)-shaped aperture equalizers. A simple logic circuit reduces the pulse-width of the conventional NRZ format, binary or multi-level input data. The finite pulse-width duration of these signals, as compared with the theoretically infinite impulse duration, permits a practical realization with negligible performance degradation. Experimental and computer simulation results demonstrate that pulse-widths of 25% for 225-QPRS class I, 18.75% for 64-QAM and 12.5% for 256-QAM lead to a performance degradation of only 0.2 dB at a Pe = 10-8.

AB - Digital quasi-impulse-shaped signals for the transmission of Nyquist-shaped raised-cosine filtered signals and partial response signals are considered. Quasi-impulse signals do not require conventionally used phase-equalized x/sin(x)-shaped aperture equalizers. A simple logic circuit reduces the pulse-width of the conventional NRZ format, binary or multi-level input data. The finite pulse-width duration of these signals, as compared with the theoretically infinite impulse duration, permits a practical realization with negligible performance degradation. Experimental and computer simulation results demonstrate that pulse-widths of 25% for 225-QPRS class I, 18.75% for 64-QAM and 12.5% for 256-QAM lead to a performance degradation of only 0.2 dB at a Pe = 10-8.

UR - http://www.scopus.com/inward/record.url?scp=0024865371&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0024865371&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:0024865371

VL - 14

SP - 31

EP - 34

JO - Canadian Journal of Electrical and Computer Engineering

JF - Canadian Journal of Electrical and Computer Engineering

SN - 0840-8688

IS - 1

ER -