Distributed autonomic tool management method based on intelligent cutting tools

Hideki Aoyama, Takeshi Kishinami, Katasumasa Saito, Makoto Sato, Kazuo Yamazaki

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

This paper clarifies some of the problems of a traditional management method in a flexible manufacturing system (FMS) or a computer integrated manufacturing system (CIM) and suggests a distributed autonomic management method to solve such problems. In particular, a discussion of the proposed method focuses on tool management. Then, an intelligent cutting tool that is constructed using memory, sensors, and a processor is proposed. Also a distributed autonomic tool management method based on intelligent cutting tools is presented. In the proposition of the intelligent cutting tool, the concept of the cutting tool, the functions of the three parts constructing the cutting tool, and a tool information model are described.

Original languageEnglish
Title of host publicationFlexible Automation 1992
PublisherPubl by ASME
Pages1723-1728
Number of pages6
Publication statusPublished - 1992
Externally publishedYes
EventProceedings of the 1992 Japan - USA Symposium on Flexible Automation Part 2 (of 2) - San Francisco, CA, USA
Duration: 1992 Jul 131992 Jul 15

Other

OtherProceedings of the 1992 Japan - USA Symposium on Flexible Automation Part 2 (of 2)
CitySan Francisco, CA, USA
Period92/7/1392/7/15

Fingerprint

Cutting tools
Computer integrated manufacturing
Flexible manufacturing systems
Data storage equipment
Sensors

ASJC Scopus subject areas

  • Engineering(all)

Cite this

Aoyama, H., Kishinami, T., Saito, K., Sato, M., & Yamazaki, K. (1992). Distributed autonomic tool management method based on intelligent cutting tools. In Flexible Automation 1992 (pp. 1723-1728). Publ by ASME.

Distributed autonomic tool management method based on intelligent cutting tools. / Aoyama, Hideki; Kishinami, Takeshi; Saito, Katasumasa; Sato, Makoto; Yamazaki, Kazuo.

Flexible Automation 1992. Publ by ASME, 1992. p. 1723-1728.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aoyama, H, Kishinami, T, Saito, K, Sato, M & Yamazaki, K 1992, Distributed autonomic tool management method based on intelligent cutting tools. in Flexible Automation 1992. Publ by ASME, pp. 1723-1728, Proceedings of the 1992 Japan - USA Symposium on Flexible Automation Part 2 (of 2), San Francisco, CA, USA, 92/7/13.
Aoyama H, Kishinami T, Saito K, Sato M, Yamazaki K. Distributed autonomic tool management method based on intelligent cutting tools. In Flexible Automation 1992. Publ by ASME. 1992. p. 1723-1728
Aoyama, Hideki ; Kishinami, Takeshi ; Saito, Katasumasa ; Sato, Makoto ; Yamazaki, Kazuo. / Distributed autonomic tool management method based on intelligent cutting tools. Flexible Automation 1992. Publ by ASME, 1992. pp. 1723-1728
@inproceedings{94a8966bb1f848669a3f2299368f3aad,
title = "Distributed autonomic tool management method based on intelligent cutting tools",
abstract = "This paper clarifies some of the problems of a traditional management method in a flexible manufacturing system (FMS) or a computer integrated manufacturing system (CIM) and suggests a distributed autonomic management method to solve such problems. In particular, a discussion of the proposed method focuses on tool management. Then, an intelligent cutting tool that is constructed using memory, sensors, and a processor is proposed. Also a distributed autonomic tool management method based on intelligent cutting tools is presented. In the proposition of the intelligent cutting tool, the concept of the cutting tool, the functions of the three parts constructing the cutting tool, and a tool information model are described.",
author = "Hideki Aoyama and Takeshi Kishinami and Katasumasa Saito and Makoto Sato and Kazuo Yamazaki",
year = "1992",
language = "English",
pages = "1723--1728",
booktitle = "Flexible Automation 1992",
publisher = "Publ by ASME",

}

TY - GEN

T1 - Distributed autonomic tool management method based on intelligent cutting tools

AU - Aoyama, Hideki

AU - Kishinami, Takeshi

AU - Saito, Katasumasa

AU - Sato, Makoto

AU - Yamazaki, Kazuo

PY - 1992

Y1 - 1992

N2 - This paper clarifies some of the problems of a traditional management method in a flexible manufacturing system (FMS) or a computer integrated manufacturing system (CIM) and suggests a distributed autonomic management method to solve such problems. In particular, a discussion of the proposed method focuses on tool management. Then, an intelligent cutting tool that is constructed using memory, sensors, and a processor is proposed. Also a distributed autonomic tool management method based on intelligent cutting tools is presented. In the proposition of the intelligent cutting tool, the concept of the cutting tool, the functions of the three parts constructing the cutting tool, and a tool information model are described.

AB - This paper clarifies some of the problems of a traditional management method in a flexible manufacturing system (FMS) or a computer integrated manufacturing system (CIM) and suggests a distributed autonomic management method to solve such problems. In particular, a discussion of the proposed method focuses on tool management. Then, an intelligent cutting tool that is constructed using memory, sensors, and a processor is proposed. Also a distributed autonomic tool management method based on intelligent cutting tools is presented. In the proposition of the intelligent cutting tool, the concept of the cutting tool, the functions of the three parts constructing the cutting tool, and a tool information model are described.

UR - http://www.scopus.com/inward/record.url?scp=0027035636&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027035636&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0027035636

SP - 1723

EP - 1728

BT - Flexible Automation 1992

PB - Publ by ASME

ER -