Dynamic modeling and in-process parametric compensation for fabricating micro straight thin walls by micromilling

Yang Li, Xiang Cheng, Guangming Zheng, Jiwang Yan, Huanbao Liu, Xuewei Li

Research output: Contribution to journalArticlepeer-review

Abstract

A comprehensive dynamic model is introduced try to further reduce dimensional errors of micromilled micro straight thin walls based on an in-process cutting parameter compensation device. First, a mathematical model is established to predict the dynamic elastic deformation of the thin walls in the micromilling process. Next, the radial deformation and the runout of the cutter are modeled. Then, the comprehensive in-process parametric compensation model and strategy are established. Finally, a real-time in-process cutting force measurement and cutting parameter compensation device is applied to the micromilling system and thin wall fabrication experiments have been conducted. It shows that the comprehensive dimensional error model and iterative compensation method are effective, and the dimension and shape precision of the micro straight thin wall has been obviously improved after the compensation of the radial cutting depth. The average relative errors have been reduced from 6.86% to 1.10%∼1.70%. The in-process compensation method introduced in this study is efficient and convenient as long as compensation strategies are integrated in the controlling unit for a specific micromilling process.

Original languageEnglish
Pages (from-to)2480-2493
Number of pages14
JournalJournal of Materials Research and Technology
Volume18
DOIs
Publication statusPublished - 2022 May

Keywords

  • Dimensional error
  • Dynamic modeling
  • Elastic deformation
  • In-process iterative compensation
  • Micromilling
  • Thin wall

ASJC Scopus subject areas

  • Ceramics and Composites
  • Biomaterials
  • Surfaces, Coatings and Films
  • Metals and Alloys

Fingerprint

Dive into the research topics of 'Dynamic modeling and in-process parametric compensation for fabricating micro straight thin walls by micromilling'. Together they form a unique fingerprint.

Cite this