Effective fusing method to achieve thermally sprayed steel with ni-based self-fluxing alloy which indicate high fatigue properties

Hiroyuki Akebono, Jun Komotori, Masao Shimizu

Research output: Contribution to journalArticle

Abstract

In order to achieve thermally sprayed steel which indicate higher fatigue properties, ettective fusing methods were performed by using both an induction heating system and a vacuum furnace. In our previous studies, fusing by an induction heating system can form the sprayed coating which was prevented segregation of chromium compound, and fusing by a vacuum furnace can form the thicker diffusion layer which indicates higher adhesive strength. Method of performing pre-heating by a vacuum furnace before fusing by an induction heating system couldn't achieve thermally sprayed steel which indicate higher fatigue properties because delamination between the coating layer and substrate was occurred. However, method of performing re-heating by a vacuum furnace after fusing by an induction heating system could. As the result, thermally sprayed steel indicate 300% higher fatigue strength compare with substrate only.

Original languageEnglish
Pages (from-to)839-845
Number of pages7
JournalNihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A
Volume76
Issue number767
Publication statusPublished - 2010 Jul
Externally publishedYes

Fingerprint

Vacuum furnaces
Induction heating
Steel
Fatigue of materials
Chromium Compounds
Chromium compounds
Heating
Sprayed coatings
Substrates
Delamination
Adhesives
Coatings

Keywords

  • Fatigue
  • Fusing
  • Induction heating system
  • Ni-Based self-fluxing alloy
  • Vacuum furnace

ASJC Scopus subject areas

  • Mechanical Engineering
  • Mechanics of Materials
  • Materials Science(all)

Cite this

@article{f59b3e0541654607ab7d00ce85e7bfc1,
title = "Effective fusing method to achieve thermally sprayed steel with ni-based self-fluxing alloy which indicate high fatigue properties",
abstract = "In order to achieve thermally sprayed steel which indicate higher fatigue properties, ettective fusing methods were performed by using both an induction heating system and a vacuum furnace. In our previous studies, fusing by an induction heating system can form the sprayed coating which was prevented segregation of chromium compound, and fusing by a vacuum furnace can form the thicker diffusion layer which indicates higher adhesive strength. Method of performing pre-heating by a vacuum furnace before fusing by an induction heating system couldn't achieve thermally sprayed steel which indicate higher fatigue properties because delamination between the coating layer and substrate was occurred. However, method of performing re-heating by a vacuum furnace after fusing by an induction heating system could. As the result, thermally sprayed steel indicate 300{\%} higher fatigue strength compare with substrate only.",
keywords = "Fatigue, Fusing, Induction heating system, Ni-Based self-fluxing alloy, Vacuum furnace",
author = "Hiroyuki Akebono and Jun Komotori and Masao Shimizu",
year = "2010",
month = "7",
language = "English",
volume = "76",
pages = "839--845",
journal = "Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A",
issn = "0387-5008",
publisher = "Japan Society of Mechanical Engineers",
number = "767",

}

TY - JOUR

T1 - Effective fusing method to achieve thermally sprayed steel with ni-based self-fluxing alloy which indicate high fatigue properties

AU - Akebono, Hiroyuki

AU - Komotori, Jun

AU - Shimizu, Masao

PY - 2010/7

Y1 - 2010/7

N2 - In order to achieve thermally sprayed steel which indicate higher fatigue properties, ettective fusing methods were performed by using both an induction heating system and a vacuum furnace. In our previous studies, fusing by an induction heating system can form the sprayed coating which was prevented segregation of chromium compound, and fusing by a vacuum furnace can form the thicker diffusion layer which indicates higher adhesive strength. Method of performing pre-heating by a vacuum furnace before fusing by an induction heating system couldn't achieve thermally sprayed steel which indicate higher fatigue properties because delamination between the coating layer and substrate was occurred. However, method of performing re-heating by a vacuum furnace after fusing by an induction heating system could. As the result, thermally sprayed steel indicate 300% higher fatigue strength compare with substrate only.

AB - In order to achieve thermally sprayed steel which indicate higher fatigue properties, ettective fusing methods were performed by using both an induction heating system and a vacuum furnace. In our previous studies, fusing by an induction heating system can form the sprayed coating which was prevented segregation of chromium compound, and fusing by a vacuum furnace can form the thicker diffusion layer which indicates higher adhesive strength. Method of performing pre-heating by a vacuum furnace before fusing by an induction heating system couldn't achieve thermally sprayed steel which indicate higher fatigue properties because delamination between the coating layer and substrate was occurred. However, method of performing re-heating by a vacuum furnace after fusing by an induction heating system could. As the result, thermally sprayed steel indicate 300% higher fatigue strength compare with substrate only.

KW - Fatigue

KW - Fusing

KW - Induction heating system

KW - Ni-Based self-fluxing alloy

KW - Vacuum furnace

UR - http://www.scopus.com/inward/record.url?scp=77957296601&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77957296601&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:77957296601

VL - 76

SP - 839

EP - 845

JO - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

JF - Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A

SN - 0387-5008

IS - 767

ER -