Effects of four different surgical approaches on intra-operative joint gap in posterior-stabilized total knee arthroplasty

Yasuo Niki, Yuki Takeda, Hiroya Kanagawa, Wataru Iwamoto, Hideo Matsumoto, Hiroyuki Enomoto, Yoshiaki Toyama, Yasunori Suda

Research output: Contribution to journalArticle

9 Citations (Scopus)

Abstract

Purpose: The effects of surgical approaches and patellar positions on joint gap measurement during total knee arthroplasty (TKA) remain unclear. We hypothesized that joint gap changes with different knee flexion angles would not be consistent within four different approaches and two different patellar positions. Methods: This study enrolled 80 knees undergoing posterior-stabilized TKA. For 60 varus knees, parapatellar, midvastus, and subvastus approaches were used in 20 knees each. For 20 valgus knees, a lateral subvastus approach was used. Component gap length and inclination were measured intra-operatively using a specific tensor device under 40 lb with the patella reduced or shifted laterally, at 0°, 45°, 90°, and 135° of knee flexion. Results: Mean gap lengths at 45° and 90° of knee flexion were significantly larger with the parapatellar approach than with midvastus or lateral subvastus approaches (P < 0. 05). Regarding gap inclination, varus angle increased linearly through the entire arc of flexion in all four approaches. When the patella was shifted laterally, gap lengths at 45°, 90°, and 135° were significantly reduced compared with those for the patella reduced in the subvastus approach, whereas gap length was constant in the parapatellar approach, regardless of patellar position. Conclusion: Joint gap kinematics was not consistent within four different approaches and two different patellar positions. Relatively large gaps at 45° and 90° were unique features for the parapatellar approach. Surgeons should be aware that the flexion gap is reduced when the patella is shifted laterally in vastus medialis-preserving approaches such as the subvastus approach. Level of evidence: II.

Original languageEnglish
Pages (from-to)2026-2031
Number of pages6
JournalKnee Surgery, Sports Traumatology, Arthroscopy
Volume20
Issue number10
DOIs
Publication statusPublished - 2012

Fingerprint

Knee Replacement Arthroplasties
Knee
Joints
Patella
Quadriceps Muscle
Biomechanical Phenomena
Equipment and Supplies

Keywords

  • Joint gap
  • Soft tissue balance
  • Surgical approach
  • Total knee arthroplasty

ASJC Scopus subject areas

  • Orthopedics and Sports Medicine
  • Surgery

Cite this

Effects of four different surgical approaches on intra-operative joint gap in posterior-stabilized total knee arthroplasty. / Niki, Yasuo; Takeda, Yuki; Kanagawa, Hiroya; Iwamoto, Wataru; Matsumoto, Hideo; Enomoto, Hiroyuki; Toyama, Yoshiaki; Suda, Yasunori.

In: Knee Surgery, Sports Traumatology, Arthroscopy, Vol. 20, No. 10, 2012, p. 2026-2031.

Research output: Contribution to journalArticle

Niki, Yasuo ; Takeda, Yuki ; Kanagawa, Hiroya ; Iwamoto, Wataru ; Matsumoto, Hideo ; Enomoto, Hiroyuki ; Toyama, Yoshiaki ; Suda, Yasunori. / Effects of four different surgical approaches on intra-operative joint gap in posterior-stabilized total knee arthroplasty. In: Knee Surgery, Sports Traumatology, Arthroscopy. 2012 ; Vol. 20, No. 10. pp. 2026-2031.
@article{3dd60026761e4aeea89ce0c93b50596e,
title = "Effects of four different surgical approaches on intra-operative joint gap in posterior-stabilized total knee arthroplasty",
abstract = "Purpose: The effects of surgical approaches and patellar positions on joint gap measurement during total knee arthroplasty (TKA) remain unclear. We hypothesized that joint gap changes with different knee flexion angles would not be consistent within four different approaches and two different patellar positions. Methods: This study enrolled 80 knees undergoing posterior-stabilized TKA. For 60 varus knees, parapatellar, midvastus, and subvastus approaches were used in 20 knees each. For 20 valgus knees, a lateral subvastus approach was used. Component gap length and inclination were measured intra-operatively using a specific tensor device under 40 lb with the patella reduced or shifted laterally, at 0°, 45°, 90°, and 135° of knee flexion. Results: Mean gap lengths at 45° and 90° of knee flexion were significantly larger with the parapatellar approach than with midvastus or lateral subvastus approaches (P < 0. 05). Regarding gap inclination, varus angle increased linearly through the entire arc of flexion in all four approaches. When the patella was shifted laterally, gap lengths at 45°, 90°, and 135° were significantly reduced compared with those for the patella reduced in the subvastus approach, whereas gap length was constant in the parapatellar approach, regardless of patellar position. Conclusion: Joint gap kinematics was not consistent within four different approaches and two different patellar positions. Relatively large gaps at 45° and 90° were unique features for the parapatellar approach. Surgeons should be aware that the flexion gap is reduced when the patella is shifted laterally in vastus medialis-preserving approaches such as the subvastus approach. Level of evidence: II.",
keywords = "Joint gap, Soft tissue balance, Surgical approach, Total knee arthroplasty",
author = "Yasuo Niki and Yuki Takeda and Hiroya Kanagawa and Wataru Iwamoto and Hideo Matsumoto and Hiroyuki Enomoto and Yoshiaki Toyama and Yasunori Suda",
year = "2012",
doi = "10.1007/s00167-011-1813-5",
language = "English",
volume = "20",
pages = "2026--2031",
journal = "Knee Surgery, Sports Traumatology, Arthroscopy",
issn = "0942-2056",
publisher = "Springer Verlag",
number = "10",

}

TY - JOUR

T1 - Effects of four different surgical approaches on intra-operative joint gap in posterior-stabilized total knee arthroplasty

AU - Niki, Yasuo

AU - Takeda, Yuki

AU - Kanagawa, Hiroya

AU - Iwamoto, Wataru

AU - Matsumoto, Hideo

AU - Enomoto, Hiroyuki

AU - Toyama, Yoshiaki

AU - Suda, Yasunori

PY - 2012

Y1 - 2012

N2 - Purpose: The effects of surgical approaches and patellar positions on joint gap measurement during total knee arthroplasty (TKA) remain unclear. We hypothesized that joint gap changes with different knee flexion angles would not be consistent within four different approaches and two different patellar positions. Methods: This study enrolled 80 knees undergoing posterior-stabilized TKA. For 60 varus knees, parapatellar, midvastus, and subvastus approaches were used in 20 knees each. For 20 valgus knees, a lateral subvastus approach was used. Component gap length and inclination were measured intra-operatively using a specific tensor device under 40 lb with the patella reduced or shifted laterally, at 0°, 45°, 90°, and 135° of knee flexion. Results: Mean gap lengths at 45° and 90° of knee flexion were significantly larger with the parapatellar approach than with midvastus or lateral subvastus approaches (P < 0. 05). Regarding gap inclination, varus angle increased linearly through the entire arc of flexion in all four approaches. When the patella was shifted laterally, gap lengths at 45°, 90°, and 135° were significantly reduced compared with those for the patella reduced in the subvastus approach, whereas gap length was constant in the parapatellar approach, regardless of patellar position. Conclusion: Joint gap kinematics was not consistent within four different approaches and two different patellar positions. Relatively large gaps at 45° and 90° were unique features for the parapatellar approach. Surgeons should be aware that the flexion gap is reduced when the patella is shifted laterally in vastus medialis-preserving approaches such as the subvastus approach. Level of evidence: II.

AB - Purpose: The effects of surgical approaches and patellar positions on joint gap measurement during total knee arthroplasty (TKA) remain unclear. We hypothesized that joint gap changes with different knee flexion angles would not be consistent within four different approaches and two different patellar positions. Methods: This study enrolled 80 knees undergoing posterior-stabilized TKA. For 60 varus knees, parapatellar, midvastus, and subvastus approaches were used in 20 knees each. For 20 valgus knees, a lateral subvastus approach was used. Component gap length and inclination were measured intra-operatively using a specific tensor device under 40 lb with the patella reduced or shifted laterally, at 0°, 45°, 90°, and 135° of knee flexion. Results: Mean gap lengths at 45° and 90° of knee flexion were significantly larger with the parapatellar approach than with midvastus or lateral subvastus approaches (P < 0. 05). Regarding gap inclination, varus angle increased linearly through the entire arc of flexion in all four approaches. When the patella was shifted laterally, gap lengths at 45°, 90°, and 135° were significantly reduced compared with those for the patella reduced in the subvastus approach, whereas gap length was constant in the parapatellar approach, regardless of patellar position. Conclusion: Joint gap kinematics was not consistent within four different approaches and two different patellar positions. Relatively large gaps at 45° and 90° were unique features for the parapatellar approach. Surgeons should be aware that the flexion gap is reduced when the patella is shifted laterally in vastus medialis-preserving approaches such as the subvastus approach. Level of evidence: II.

KW - Joint gap

KW - Soft tissue balance

KW - Surgical approach

KW - Total knee arthroplasty

UR - http://www.scopus.com/inward/record.url?scp=84866934915&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84866934915&partnerID=8YFLogxK

U2 - 10.1007/s00167-011-1813-5

DO - 10.1007/s00167-011-1813-5

M3 - Article

C2 - 22159521

AN - SCOPUS:84866934915

VL - 20

SP - 2026

EP - 2031

JO - Knee Surgery, Sports Traumatology, Arthroscopy

JF - Knee Surgery, Sports Traumatology, Arthroscopy

SN - 0942-2056

IS - 10

ER -