Enhancement and control of local heat transfer in a gas flow containing soft magnetic particles

Koichi Hishida, Hiroshi Kishizawa, Tsutomu Tominaga, Masanobu Maeda

Research output: Contribution to journalArticle

Abstract

A novel technique for enhancing and controlling local heat transfer coefficients from the hot wall to the cooling gas flow using soft magnetic solid particles has been proposed in order to eliminate the disadvantages of inefficient gas-solid two-phase flow. The characteristics of the flow and local heat transfer were examined in a vertical rectangular channel flow involving ferrite particles of 145 μm in diameter. The Reynolds number of the channel flow was set at approximately 104 and the particle mass loading ratio was varied up to 1.6. The result indicated 60 percent enhancement of heat transfer downstream from the location of the magnet at a mass loading ratio of about 1.6. Further enhancement in heat transfer is provided by increasing the particle mass loading ratio and the magnetic field intensity. The mechanism of heat transfer enhancement can be clarified by considering the increase in the local heat capacity near the heated plate.

Original languageEnglish
Pages (from-to)3919-3924
Number of pages6
JournalNippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B
Volume59
Issue number568
Publication statusPublished - 1993 Dec
Externally publishedYes

Fingerprint

gas flow
Flow of gases
heat transfer
Heat transfer
augmentation
particle mass
channel flow
Channel flow
two phase flow
heat transfer coefficients
Two phase flow
Heat transfer coefficients
Specific heat
Magnets
Ferrite
magnetic flux
ferrites
Reynolds number
magnets
specific heat

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Enhancement and control of local heat transfer in a gas flow containing soft magnetic particles. / Hishida, Koichi; Kishizawa, Hiroshi; Tominaga, Tsutomu; Maeda, Masanobu.

In: Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, Vol. 59, No. 568, 12.1993, p. 3919-3924.

Research output: Contribution to journalArticle

@article{7a7bdc33a5454ba596f6afee662c60d4,
title = "Enhancement and control of local heat transfer in a gas flow containing soft magnetic particles",
abstract = "A novel technique for enhancing and controlling local heat transfer coefficients from the hot wall to the cooling gas flow using soft magnetic solid particles has been proposed in order to eliminate the disadvantages of inefficient gas-solid two-phase flow. The characteristics of the flow and local heat transfer were examined in a vertical rectangular channel flow involving ferrite particles of 145 μm in diameter. The Reynolds number of the channel flow was set at approximately 104 and the particle mass loading ratio was varied up to 1.6. The result indicated 60 percent enhancement of heat transfer downstream from the location of the magnet at a mass loading ratio of about 1.6. Further enhancement in heat transfer is provided by increasing the particle mass loading ratio and the magnetic field intensity. The mechanism of heat transfer enhancement can be clarified by considering the increase in the local heat capacity near the heated plate.",
author = "Koichi Hishida and Hiroshi Kishizawa and Tsutomu Tominaga and Masanobu Maeda",
year = "1993",
month = "12",
language = "English",
volume = "59",
pages = "3919--3924",
journal = "Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B",
issn = "0387-5016",
publisher = "Japan Society of Mechanical Engineers",
number = "568",

}

TY - JOUR

T1 - Enhancement and control of local heat transfer in a gas flow containing soft magnetic particles

AU - Hishida, Koichi

AU - Kishizawa, Hiroshi

AU - Tominaga, Tsutomu

AU - Maeda, Masanobu

PY - 1993/12

Y1 - 1993/12

N2 - A novel technique for enhancing and controlling local heat transfer coefficients from the hot wall to the cooling gas flow using soft magnetic solid particles has been proposed in order to eliminate the disadvantages of inefficient gas-solid two-phase flow. The characteristics of the flow and local heat transfer were examined in a vertical rectangular channel flow involving ferrite particles of 145 μm in diameter. The Reynolds number of the channel flow was set at approximately 104 and the particle mass loading ratio was varied up to 1.6. The result indicated 60 percent enhancement of heat transfer downstream from the location of the magnet at a mass loading ratio of about 1.6. Further enhancement in heat transfer is provided by increasing the particle mass loading ratio and the magnetic field intensity. The mechanism of heat transfer enhancement can be clarified by considering the increase in the local heat capacity near the heated plate.

AB - A novel technique for enhancing and controlling local heat transfer coefficients from the hot wall to the cooling gas flow using soft magnetic solid particles has been proposed in order to eliminate the disadvantages of inefficient gas-solid two-phase flow. The characteristics of the flow and local heat transfer were examined in a vertical rectangular channel flow involving ferrite particles of 145 μm in diameter. The Reynolds number of the channel flow was set at approximately 104 and the particle mass loading ratio was varied up to 1.6. The result indicated 60 percent enhancement of heat transfer downstream from the location of the magnet at a mass loading ratio of about 1.6. Further enhancement in heat transfer is provided by increasing the particle mass loading ratio and the magnetic field intensity. The mechanism of heat transfer enhancement can be clarified by considering the increase in the local heat capacity near the heated plate.

UR - http://www.scopus.com/inward/record.url?scp=0027809275&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0027809275&partnerID=8YFLogxK

M3 - Article

VL - 59

SP - 3919

EP - 3924

JO - Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B

JF - Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B

SN - 0387-5016

IS - 568

ER -