Enhancement of bending formability of brittle sheet metal in multilayer metallic sheets

J. Yanagimoto, Tetsuo Oya, S. Kawanishi, N. Tiesler, T. Koseki

Research output: Contribution to journalArticle

34 Citations (Scopus)

Abstract

The formability of multilayer metallic sheets is evaluated by tensile, V-bending, hat bending and hemming tests. A monolithic type-420J2 stainless steel sheet cannot be formed because of poor elongation as small as 1.7%. Marked enhancement of the bending formability was observed in the bending of type-420J2 stainless steel sheets when they are layered by type-304 stainless steel sheets and composed into a multilayer metallic sheet. The mechanism of the enhancement of the formability of type-420J2 stainless steel in a multilayer metallic sheet is investigated analytically by focusing on the delay of the initiation of necking, and by performing stress analysis by finite element method (FEM).

Original languageEnglish
Pages (from-to)287-290
Number of pages4
JournalCIRP Annals - Manufacturing Technology
Volume59
Issue number1
DOIs
Publication statusPublished - 2010
Externally publishedYes

Fingerprint

Formability
Sheet metal
Multilayers
Steel sheet
Stainless steel
Stress analysis
Elongation
Finite element method

Keywords

  • Enhanced formability
  • Multilayer metallic sheet
  • Sheet metal forming

ASJC Scopus subject areas

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering

Cite this

Enhancement of bending formability of brittle sheet metal in multilayer metallic sheets. / Yanagimoto, J.; Oya, Tetsuo; Kawanishi, S.; Tiesler, N.; Koseki, T.

In: CIRP Annals - Manufacturing Technology, Vol. 59, No. 1, 2010, p. 287-290.

Research output: Contribution to journalArticle

Yanagimoto, J. ; Oya, Tetsuo ; Kawanishi, S. ; Tiesler, N. ; Koseki, T. / Enhancement of bending formability of brittle sheet metal in multilayer metallic sheets. In: CIRP Annals - Manufacturing Technology. 2010 ; Vol. 59, No. 1. pp. 287-290.
@article{c8c23fc0bdc84800a7f6f605e23c9037,
title = "Enhancement of bending formability of brittle sheet metal in multilayer metallic sheets",
abstract = "The formability of multilayer metallic sheets is evaluated by tensile, V-bending, hat bending and hemming tests. A monolithic type-420J2 stainless steel sheet cannot be formed because of poor elongation as small as 1.7{\%}. Marked enhancement of the bending formability was observed in the bending of type-420J2 stainless steel sheets when they are layered by type-304 stainless steel sheets and composed into a multilayer metallic sheet. The mechanism of the enhancement of the formability of type-420J2 stainless steel in a multilayer metallic sheet is investigated analytically by focusing on the delay of the initiation of necking, and by performing stress analysis by finite element method (FEM).",
keywords = "Enhanced formability, Multilayer metallic sheet, Sheet metal forming",
author = "J. Yanagimoto and Tetsuo Oya and S. Kawanishi and N. Tiesler and T. Koseki",
year = "2010",
doi = "10.1016/j.cirp.2010.03.109",
language = "English",
volume = "59",
pages = "287--290",
journal = "CIRP Annals - Manufacturing Technology",
issn = "0007-8506",
publisher = "Elsevier USA",
number = "1",

}

TY - JOUR

T1 - Enhancement of bending formability of brittle sheet metal in multilayer metallic sheets

AU - Yanagimoto, J.

AU - Oya, Tetsuo

AU - Kawanishi, S.

AU - Tiesler, N.

AU - Koseki, T.

PY - 2010

Y1 - 2010

N2 - The formability of multilayer metallic sheets is evaluated by tensile, V-bending, hat bending and hemming tests. A monolithic type-420J2 stainless steel sheet cannot be formed because of poor elongation as small as 1.7%. Marked enhancement of the bending formability was observed in the bending of type-420J2 stainless steel sheets when they are layered by type-304 stainless steel sheets and composed into a multilayer metallic sheet. The mechanism of the enhancement of the formability of type-420J2 stainless steel in a multilayer metallic sheet is investigated analytically by focusing on the delay of the initiation of necking, and by performing stress analysis by finite element method (FEM).

AB - The formability of multilayer metallic sheets is evaluated by tensile, V-bending, hat bending and hemming tests. A monolithic type-420J2 stainless steel sheet cannot be formed because of poor elongation as small as 1.7%. Marked enhancement of the bending formability was observed in the bending of type-420J2 stainless steel sheets when they are layered by type-304 stainless steel sheets and composed into a multilayer metallic sheet. The mechanism of the enhancement of the formability of type-420J2 stainless steel in a multilayer metallic sheet is investigated analytically by focusing on the delay of the initiation of necking, and by performing stress analysis by finite element method (FEM).

KW - Enhanced formability

KW - Multilayer metallic sheet

KW - Sheet metal forming

UR - http://www.scopus.com/inward/record.url?scp=77955325182&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77955325182&partnerID=8YFLogxK

U2 - 10.1016/j.cirp.2010.03.109

DO - 10.1016/j.cirp.2010.03.109

M3 - Article

AN - SCOPUS:77955325182

VL - 59

SP - 287

EP - 290

JO - CIRP Annals - Manufacturing Technology

JF - CIRP Annals - Manufacturing Technology

SN - 0007-8506

IS - 1

ER -