Enhancement of cutting force observer by identification of position and force-amplitude dependent model parameters

Shuntaro Yamato, Akihiro Sugiyama, Norikazu Suzuki, Naruhiro Irino, Yasuhiro Imabeppu, Yasuhiro Kakinuma

Research output: Contribution to journalArticle

Abstract

External sensor-less cutting force estimation has good potential in terms of its sustainability. However, its accuracy will deteriorate due to variation of machine dynamics depending on the stage position and cutting force amplitude. In the conventional methods, the physical model parameters such as the axial stiffness and viscous damping coefficient are regarded as constant values identified at a certain condition. As a result, the estimation accuracy decreases because the above parameter variation is not considered. To tackle this issue, a simple parameter identification method in time domain by employing the least-squares method (LSM) and a cutting force estimation by a load-side disturbance observer (LDOB) are proposed for a full-closed controlled ball-screw-driven stage. A series of excitation tests were conducted at different stage positions and various excitation amplitudes in order to capture the position and force-amplitude dependent model parameters. The difference of model behavior in the moving and stopped condition of the stage was also investigated. The position and force-amplitude dependent model parameters captured by the proposed method are installed into the observer. The validity of the proposed method was evaluated through end-milling tests. The experimental results clearly showed that the estimation accuracy of cutting force can be greatly improved in both feed and cross-feed directions by taking into account the position and force-amplitude dependency of physical model parameters.

Original languageEnglish
JournalInternational Journal of Advanced Manufacturing Technology
DOIs
Publication statusPublished - 2019 Jan 1

Fingerprint

Identification (control systems)
Ball screws
Sustainable development
Damping
Stiffness
Sensors

Keywords

  • Ball-screw-driven stage
  • Disturbance observer
  • Parameter identification
  • Process monitoring
  • Sensor-less

ASJC Scopus subject areas

  • Control and Systems Engineering
  • Software
  • Mechanical Engineering
  • Computer Science Applications
  • Industrial and Manufacturing Engineering

Cite this

Enhancement of cutting force observer by identification of position and force-amplitude dependent model parameters. / Yamato, Shuntaro; Sugiyama, Akihiro; Suzuki, Norikazu; Irino, Naruhiro; Imabeppu, Yasuhiro; Kakinuma, Yasuhiro.

In: International Journal of Advanced Manufacturing Technology, 01.01.2019.

Research output: Contribution to journalArticle

@article{a0567c8262cb4834b659490db3f7a47a,
title = "Enhancement of cutting force observer by identification of position and force-amplitude dependent model parameters",
abstract = "External sensor-less cutting force estimation has good potential in terms of its sustainability. However, its accuracy will deteriorate due to variation of machine dynamics depending on the stage position and cutting force amplitude. In the conventional methods, the physical model parameters such as the axial stiffness and viscous damping coefficient are regarded as constant values identified at a certain condition. As a result, the estimation accuracy decreases because the above parameter variation is not considered. To tackle this issue, a simple parameter identification method in time domain by employing the least-squares method (LSM) and a cutting force estimation by a load-side disturbance observer (LDOB) are proposed for a full-closed controlled ball-screw-driven stage. A series of excitation tests were conducted at different stage positions and various excitation amplitudes in order to capture the position and force-amplitude dependent model parameters. The difference of model behavior in the moving and stopped condition of the stage was also investigated. The position and force-amplitude dependent model parameters captured by the proposed method are installed into the observer. The validity of the proposed method was evaluated through end-milling tests. The experimental results clearly showed that the estimation accuracy of cutting force can be greatly improved in both feed and cross-feed directions by taking into account the position and force-amplitude dependency of physical model parameters.",
keywords = "Ball-screw-driven stage, Disturbance observer, Parameter identification, Process monitoring, Sensor-less",
author = "Shuntaro Yamato and Akihiro Sugiyama and Norikazu Suzuki and Naruhiro Irino and Yasuhiro Imabeppu and Yasuhiro Kakinuma",
year = "2019",
month = "1",
day = "1",
doi = "10.1007/s00170-019-04080-8",
language = "English",
journal = "International Journal of Advanced Manufacturing Technology",
issn = "0268-3768",
publisher = "Springer London",

}

TY - JOUR

T1 - Enhancement of cutting force observer by identification of position and force-amplitude dependent model parameters

AU - Yamato, Shuntaro

AU - Sugiyama, Akihiro

AU - Suzuki, Norikazu

AU - Irino, Naruhiro

AU - Imabeppu, Yasuhiro

AU - Kakinuma, Yasuhiro

PY - 2019/1/1

Y1 - 2019/1/1

N2 - External sensor-less cutting force estimation has good potential in terms of its sustainability. However, its accuracy will deteriorate due to variation of machine dynamics depending on the stage position and cutting force amplitude. In the conventional methods, the physical model parameters such as the axial stiffness and viscous damping coefficient are regarded as constant values identified at a certain condition. As a result, the estimation accuracy decreases because the above parameter variation is not considered. To tackle this issue, a simple parameter identification method in time domain by employing the least-squares method (LSM) and a cutting force estimation by a load-side disturbance observer (LDOB) are proposed for a full-closed controlled ball-screw-driven stage. A series of excitation tests were conducted at different stage positions and various excitation amplitudes in order to capture the position and force-amplitude dependent model parameters. The difference of model behavior in the moving and stopped condition of the stage was also investigated. The position and force-amplitude dependent model parameters captured by the proposed method are installed into the observer. The validity of the proposed method was evaluated through end-milling tests. The experimental results clearly showed that the estimation accuracy of cutting force can be greatly improved in both feed and cross-feed directions by taking into account the position and force-amplitude dependency of physical model parameters.

AB - External sensor-less cutting force estimation has good potential in terms of its sustainability. However, its accuracy will deteriorate due to variation of machine dynamics depending on the stage position and cutting force amplitude. In the conventional methods, the physical model parameters such as the axial stiffness and viscous damping coefficient are regarded as constant values identified at a certain condition. As a result, the estimation accuracy decreases because the above parameter variation is not considered. To tackle this issue, a simple parameter identification method in time domain by employing the least-squares method (LSM) and a cutting force estimation by a load-side disturbance observer (LDOB) are proposed for a full-closed controlled ball-screw-driven stage. A series of excitation tests were conducted at different stage positions and various excitation amplitudes in order to capture the position and force-amplitude dependent model parameters. The difference of model behavior in the moving and stopped condition of the stage was also investigated. The position and force-amplitude dependent model parameters captured by the proposed method are installed into the observer. The validity of the proposed method was evaluated through end-milling tests. The experimental results clearly showed that the estimation accuracy of cutting force can be greatly improved in both feed and cross-feed directions by taking into account the position and force-amplitude dependency of physical model parameters.

KW - Ball-screw-driven stage

KW - Disturbance observer

KW - Parameter identification

KW - Process monitoring

KW - Sensor-less

UR - http://www.scopus.com/inward/record.url?scp=85068962700&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85068962700&partnerID=8YFLogxK

U2 - 10.1007/s00170-019-04080-8

DO - 10.1007/s00170-019-04080-8

M3 - Article

AN - SCOPUS:85068962700

JO - International Journal of Advanced Manufacturing Technology

JF - International Journal of Advanced Manufacturing Technology

SN - 0268-3768

ER -