Evaluating microscopic hardness in ferritic steel based on crystallographic measurements via electron backscatter diffraction

Mamoru Hayakawa, Kota Tomatsu, Eisuke Nakayama, Kazuo Okamura, Miyuki Yamamoto, Kazuyuki Shizawa

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Many researchers have investigated the relationship between hardness and crystallographic texture, including the Hall–Petch effect, crystal anisotropic-plasticity, dislocation strengthening, and strengthening by solutions. However, few studies have considered these effects simultaneously. This paper reports a method for estimating the impact of these multiple effects on the microscopic hardness of ferritic steel solely via electron backscatter diffraction (EBSD). Additionally, the correlation between the estimated hardness and fatigue damage is evaluated. The estimation method is based on the experimental correlation between the crystallographic texture obtained via EBSD and the hardness measured using nanoindenters. Three types of extra-low-carbon steel with different grain sizes were evaluated. First, a micro-Vickers test was conducted for each grain and the hardness distributions in the steel were evaluated. Second, EBSD measurements and nanoindentation tests were conducted at same locations to evaluate the relationship between the hardness obtained via nanoindentation and individual factors such as grain size, Taylor factor in the loading direction of indentation, kernel average misorientation (KAM), and indentation load. Each crystallographic factor had a rather low correlation with hardness, even though these low correlations were analogous to those of previous studies. Thus, we presume that the low correlations are due to the multiple effects of these factors, and a multiple-effect relational equation based on the strengthening mechanism is proposed with constants based on fitted data. The predicted and experimental hardness distributions were similar. Moreover, the grains with lower predicted hardness tended to be damaged after the fatigue test. These results suggest that the proposed equation can be used to predict the location of the lowest hardness in a material.

Original languageEnglish
Pages (from-to)281-290
Number of pages10
JournalMaterials Science and Engineering A
Volume700
DOIs
Publication statusPublished - 2017 Jul 17

Fingerprint

Ferritic steel
Electron diffraction
hardness
Hardness
steels
diffraction
electrons
Nanoindentation
nanoindentation
indentation
Indentation
textures
Textures
grain size
low carbon steels
fatigue tests
Steel
Low carbon steel
Fatigue damage
Dislocations (crystals)

Keywords

  • Electron backscatter diffraction
  • Hardening
  • Hardness measurement
  • Nanoindentation
  • Steel

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Evaluating microscopic hardness in ferritic steel based on crystallographic measurements via electron backscatter diffraction. / Hayakawa, Mamoru; Tomatsu, Kota; Nakayama, Eisuke; Okamura, Kazuo; Yamamoto, Miyuki; Shizawa, Kazuyuki.

In: Materials Science and Engineering A, Vol. 700, 17.07.2017, p. 281-290.

Research output: Contribution to journalArticle

Hayakawa, Mamoru ; Tomatsu, Kota ; Nakayama, Eisuke ; Okamura, Kazuo ; Yamamoto, Miyuki ; Shizawa, Kazuyuki. / Evaluating microscopic hardness in ferritic steel based on crystallographic measurements via electron backscatter diffraction. In: Materials Science and Engineering A. 2017 ; Vol. 700. pp. 281-290.
@article{be6b74e5607b42a1bd3565fa4d302a36,
title = "Evaluating microscopic hardness in ferritic steel based on crystallographic measurements via electron backscatter diffraction",
abstract = "Many researchers have investigated the relationship between hardness and crystallographic texture, including the Hall–Petch effect, crystal anisotropic-plasticity, dislocation strengthening, and strengthening by solutions. However, few studies have considered these effects simultaneously. This paper reports a method for estimating the impact of these multiple effects on the microscopic hardness of ferritic steel solely via electron backscatter diffraction (EBSD). Additionally, the correlation between the estimated hardness and fatigue damage is evaluated. The estimation method is based on the experimental correlation between the crystallographic texture obtained via EBSD and the hardness measured using nanoindenters. Three types of extra-low-carbon steel with different grain sizes were evaluated. First, a micro-Vickers test was conducted for each grain and the hardness distributions in the steel were evaluated. Second, EBSD measurements and nanoindentation tests were conducted at same locations to evaluate the relationship between the hardness obtained via nanoindentation and individual factors such as grain size, Taylor factor in the loading direction of indentation, kernel average misorientation (KAM), and indentation load. Each crystallographic factor had a rather low correlation with hardness, even though these low correlations were analogous to those of previous studies. Thus, we presume that the low correlations are due to the multiple effects of these factors, and a multiple-effect relational equation based on the strengthening mechanism is proposed with constants based on fitted data. The predicted and experimental hardness distributions were similar. Moreover, the grains with lower predicted hardness tended to be damaged after the fatigue test. These results suggest that the proposed equation can be used to predict the location of the lowest hardness in a material.",
keywords = "Electron backscatter diffraction, Hardening, Hardness measurement, Nanoindentation, Steel",
author = "Mamoru Hayakawa and Kota Tomatsu and Eisuke Nakayama and Kazuo Okamura and Miyuki Yamamoto and Kazuyuki Shizawa",
year = "2017",
month = "7",
day = "17",
doi = "10.1016/j.msea.2017.05.081",
language = "English",
volume = "700",
pages = "281--290",
journal = "Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing",
issn = "0921-5093",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Evaluating microscopic hardness in ferritic steel based on crystallographic measurements via electron backscatter diffraction

AU - Hayakawa, Mamoru

AU - Tomatsu, Kota

AU - Nakayama, Eisuke

AU - Okamura, Kazuo

AU - Yamamoto, Miyuki

AU - Shizawa, Kazuyuki

PY - 2017/7/17

Y1 - 2017/7/17

N2 - Many researchers have investigated the relationship between hardness and crystallographic texture, including the Hall–Petch effect, crystal anisotropic-plasticity, dislocation strengthening, and strengthening by solutions. However, few studies have considered these effects simultaneously. This paper reports a method for estimating the impact of these multiple effects on the microscopic hardness of ferritic steel solely via electron backscatter diffraction (EBSD). Additionally, the correlation between the estimated hardness and fatigue damage is evaluated. The estimation method is based on the experimental correlation between the crystallographic texture obtained via EBSD and the hardness measured using nanoindenters. Three types of extra-low-carbon steel with different grain sizes were evaluated. First, a micro-Vickers test was conducted for each grain and the hardness distributions in the steel were evaluated. Second, EBSD measurements and nanoindentation tests were conducted at same locations to evaluate the relationship between the hardness obtained via nanoindentation and individual factors such as grain size, Taylor factor in the loading direction of indentation, kernel average misorientation (KAM), and indentation load. Each crystallographic factor had a rather low correlation with hardness, even though these low correlations were analogous to those of previous studies. Thus, we presume that the low correlations are due to the multiple effects of these factors, and a multiple-effect relational equation based on the strengthening mechanism is proposed with constants based on fitted data. The predicted and experimental hardness distributions were similar. Moreover, the grains with lower predicted hardness tended to be damaged after the fatigue test. These results suggest that the proposed equation can be used to predict the location of the lowest hardness in a material.

AB - Many researchers have investigated the relationship between hardness and crystallographic texture, including the Hall–Petch effect, crystal anisotropic-plasticity, dislocation strengthening, and strengthening by solutions. However, few studies have considered these effects simultaneously. This paper reports a method for estimating the impact of these multiple effects on the microscopic hardness of ferritic steel solely via electron backscatter diffraction (EBSD). Additionally, the correlation between the estimated hardness and fatigue damage is evaluated. The estimation method is based on the experimental correlation between the crystallographic texture obtained via EBSD and the hardness measured using nanoindenters. Three types of extra-low-carbon steel with different grain sizes were evaluated. First, a micro-Vickers test was conducted for each grain and the hardness distributions in the steel were evaluated. Second, EBSD measurements and nanoindentation tests were conducted at same locations to evaluate the relationship between the hardness obtained via nanoindentation and individual factors such as grain size, Taylor factor in the loading direction of indentation, kernel average misorientation (KAM), and indentation load. Each crystallographic factor had a rather low correlation with hardness, even though these low correlations were analogous to those of previous studies. Thus, we presume that the low correlations are due to the multiple effects of these factors, and a multiple-effect relational equation based on the strengthening mechanism is proposed with constants based on fitted data. The predicted and experimental hardness distributions were similar. Moreover, the grains with lower predicted hardness tended to be damaged after the fatigue test. These results suggest that the proposed equation can be used to predict the location of the lowest hardness in a material.

KW - Electron backscatter diffraction

KW - Hardening

KW - Hardness measurement

KW - Nanoindentation

KW - Steel

UR - http://www.scopus.com/inward/record.url?scp=85020238130&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85020238130&partnerID=8YFLogxK

U2 - 10.1016/j.msea.2017.05.081

DO - 10.1016/j.msea.2017.05.081

M3 - Article

AN - SCOPUS:85020238130

VL - 700

SP - 281

EP - 290

JO - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

JF - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

SN - 0921-5093

ER -