Evaluation of the effect of fracture resistance curve change owing to the presence or absence of side groove in C(T) specimen on finite element failure model parameter determination

Hune Tae Kim, Ho Wan Ryu, Yun Jae Kim, Jong Sung Kim, Myung Rak Choi, Jin Weon Kim

Research output: Contribution to journalArticle

Abstract

In this paper, the effect of J-R curve changes on the determination of parameters in a failure model owing to the presence or absence of a side groove in a C(T) specimen is investigated. A stress-modified fracture strain model is implemented for FE damage simulations. C(T) specimens were taken from SA508 grade 1a low-alloy steel piping material, and some of them were processed with a side groove. Fracture toughness tests were performed at room temperature and at 316°C. The parameters of the failure model were determined by damage simulations using the J-R curves obtained from the tests. Finally, the results show that the determination of failure model parameters is not affected by variations in J-R curves owing to the presence or absence of a side groove.

Original languageEnglish
Pages (from-to)539-546
Number of pages8
JournalTransactions of the Korean Society of Mechanical Engineers, A
Volume40
Issue number6
DOIs
Publication statusPublished - 2016 Jun 1
Externally publishedYes

    Fingerprint

Keywords

  • Damage simulation
  • Finite element analysis
  • J-R fracture toughness test
  • Side groove
  • Stress-modified fracture strain model

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this