Hybrid motion reproduction using master/slave type motion-copying system

Satoshi Nishimura, Seiichiro Katsura

Research output: Contribution to journalArticle

Abstract

This paper proposes a hybrid motion reproduction structure using a master-slave structure manipulator based on a motion-copying system. Data-driven control will be an important technique in the near future. Learning from Demonstration (LfD) using a robot manipulator is already used in manufacturing. Unlike other motion observation methods based on visual or trajectory responses, a motion-copying system can obtain not only trajectory response but also force response during contact motion, which is necessary to realize contact tasks. A motion-copying system has two phases, the motion saving phase and motion reproduction phase. In the motion reproduction phase, the motion stored in the motion saving phase obtained from the bilateral control can be used to reproduce specific motion. Existing control methods for a motion-copying system have only one system in the reproduction phase, a slave system. It is necessary to consider the case where there are two systems in the phase to widen the application of a motion-copying system. The additional system can provide flexibility to the reproduced motion. In this case, data, human, and a robot are involved in reproducing the motion. In this paper, the control structure is proposed when there are two systems in the motion reproduction phase. Because there are two systems, it is necessary to design the controllers for each system. The proposed method uses a coordinate transformation technique to design two motions in each system separately. The paper also introduces a novel index called the reproduction ratio. It determines the motion to be reproduced in the motion reproduction phase. The ratio is used as an element of a coordinate transformation matrix. The experimental results show the validity of the proposed method.

Original languageEnglish
Pages (from-to)967-974
Number of pages8
JournalIEEJ Journal of Industry Applications
Volume8
Issue number6
DOIs
Publication statusPublished - 2019 Jan 1

Fingerprint

Copying
Manipulators
Trajectories
Robots
Demonstrations
Controllers

Keywords

  • Acceleration control
  • Force control
  • Modal transformation
  • Motion-copying system
  • Position control

ASJC Scopus subject areas

  • Automotive Engineering
  • Energy Engineering and Power Technology
  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Electrical and Electronic Engineering

Cite this

Hybrid motion reproduction using master/slave type motion-copying system. / Nishimura, Satoshi; Katsura, Seiichiro.

In: IEEJ Journal of Industry Applications, Vol. 8, No. 6, 01.01.2019, p. 967-974.

Research output: Contribution to journalArticle

@article{c4c49b546a2d4a1d85379a03398e66c8,
title = "Hybrid motion reproduction using master/slave type motion-copying system",
abstract = "This paper proposes a hybrid motion reproduction structure using a master-slave structure manipulator based on a motion-copying system. Data-driven control will be an important technique in the near future. Learning from Demonstration (LfD) using a robot manipulator is already used in manufacturing. Unlike other motion observation methods based on visual or trajectory responses, a motion-copying system can obtain not only trajectory response but also force response during contact motion, which is necessary to realize contact tasks. A motion-copying system has two phases, the motion saving phase and motion reproduction phase. In the motion reproduction phase, the motion stored in the motion saving phase obtained from the bilateral control can be used to reproduce specific motion. Existing control methods for a motion-copying system have only one system in the reproduction phase, a slave system. It is necessary to consider the case where there are two systems in the phase to widen the application of a motion-copying system. The additional system can provide flexibility to the reproduced motion. In this case, data, human, and a robot are involved in reproducing the motion. In this paper, the control structure is proposed when there are two systems in the motion reproduction phase. Because there are two systems, it is necessary to design the controllers for each system. The proposed method uses a coordinate transformation technique to design two motions in each system separately. The paper also introduces a novel index called the reproduction ratio. It determines the motion to be reproduced in the motion reproduction phase. The ratio is used as an element of a coordinate transformation matrix. The experimental results show the validity of the proposed method.",
keywords = "Acceleration control, Force control, Modal transformation, Motion-copying system, Position control",
author = "Satoshi Nishimura and Seiichiro Katsura",
year = "2019",
month = "1",
day = "1",
doi = "10.1541/ieejjia.8.967",
language = "English",
volume = "8",
pages = "967--974",
journal = "IEEJ Journal of Industry Applications",
issn = "2187-1094",
publisher = "The Institute of Electrical Engineers of Japan",
number = "6",

}

TY - JOUR

T1 - Hybrid motion reproduction using master/slave type motion-copying system

AU - Nishimura, Satoshi

AU - Katsura, Seiichiro

PY - 2019/1/1

Y1 - 2019/1/1

N2 - This paper proposes a hybrid motion reproduction structure using a master-slave structure manipulator based on a motion-copying system. Data-driven control will be an important technique in the near future. Learning from Demonstration (LfD) using a robot manipulator is already used in manufacturing. Unlike other motion observation methods based on visual or trajectory responses, a motion-copying system can obtain not only trajectory response but also force response during contact motion, which is necessary to realize contact tasks. A motion-copying system has two phases, the motion saving phase and motion reproduction phase. In the motion reproduction phase, the motion stored in the motion saving phase obtained from the bilateral control can be used to reproduce specific motion. Existing control methods for a motion-copying system have only one system in the reproduction phase, a slave system. It is necessary to consider the case where there are two systems in the phase to widen the application of a motion-copying system. The additional system can provide flexibility to the reproduced motion. In this case, data, human, and a robot are involved in reproducing the motion. In this paper, the control structure is proposed when there are two systems in the motion reproduction phase. Because there are two systems, it is necessary to design the controllers for each system. The proposed method uses a coordinate transformation technique to design two motions in each system separately. The paper also introduces a novel index called the reproduction ratio. It determines the motion to be reproduced in the motion reproduction phase. The ratio is used as an element of a coordinate transformation matrix. The experimental results show the validity of the proposed method.

AB - This paper proposes a hybrid motion reproduction structure using a master-slave structure manipulator based on a motion-copying system. Data-driven control will be an important technique in the near future. Learning from Demonstration (LfD) using a robot manipulator is already used in manufacturing. Unlike other motion observation methods based on visual or trajectory responses, a motion-copying system can obtain not only trajectory response but also force response during contact motion, which is necessary to realize contact tasks. A motion-copying system has two phases, the motion saving phase and motion reproduction phase. In the motion reproduction phase, the motion stored in the motion saving phase obtained from the bilateral control can be used to reproduce specific motion. Existing control methods for a motion-copying system have only one system in the reproduction phase, a slave system. It is necessary to consider the case where there are two systems in the phase to widen the application of a motion-copying system. The additional system can provide flexibility to the reproduced motion. In this case, data, human, and a robot are involved in reproducing the motion. In this paper, the control structure is proposed when there are two systems in the motion reproduction phase. Because there are two systems, it is necessary to design the controllers for each system. The proposed method uses a coordinate transformation technique to design two motions in each system separately. The paper also introduces a novel index called the reproduction ratio. It determines the motion to be reproduced in the motion reproduction phase. The ratio is used as an element of a coordinate transformation matrix. The experimental results show the validity of the proposed method.

KW - Acceleration control

KW - Force control

KW - Modal transformation

KW - Motion-copying system

KW - Position control

UR - http://www.scopus.com/inward/record.url?scp=85077807244&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85077807244&partnerID=8YFLogxK

U2 - 10.1541/ieejjia.8.967

DO - 10.1541/ieejjia.8.967

M3 - Article

AN - SCOPUS:85077807244

VL - 8

SP - 967

EP - 974

JO - IEEJ Journal of Industry Applications

JF - IEEJ Journal of Industry Applications

SN - 2187-1094

IS - 6

ER -