Influence of carbon concentration on the electrochemical behavior of CrCN coatings in simulated body fluid

Qianzhi Wang, Fei Zhou, Zhifeng Zhou, Lawrence Kwok Yan Li, Jiwang Yan

Research output: Contribution to journalArticle

15 Citations (Scopus)

Abstract

CrCN coatings with various carbon contents were deposited on 316L stainless steel disks by unbalanced magnetron sputtering via adjusting carbon target current, and their relevant microstructure was characterized by Raman spectrum and X-ray photoelectron spectroscopy, respectively. The influence of carbon content on the electrochemical properties of CrCN coatings in simulated body fluid (SBF) was investigated using open circuit potential (OCP), electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization tests. It turned out that the CrCN-coated 316L disks performed better electrochemical properties than uncoated 316L disk. All CrCN coatings contained a-CNx, but the bonding structure converted from N-C bonds to NC bonds as carbon content increased. As a result, the CrCN coatings (52.6-75.0at.% C) with NC bonds were prone to be easily degraded by breakage of π bond. In contrast, the CrCN coatings (15.4at.% C) with N-C bond alone exhibited relatively higher charge transfer resistance (Rct), and was able to prolong the longevity of prosthesis.

Original languageEnglish
Pages (from-to)16-23
Number of pages8
JournalSurface and Coatings Technology
Volume265
DOIs
Publication statusPublished - 2015 Mar 15

    Fingerprint

Keywords

  • CrCN coatings
  • EIS
  • Electrochemical properties
  • Polarization
  • Simulated body fluid

ASJC Scopus subject areas

  • Chemistry(all)
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

Cite this