Influence of spark discharge characteristics on ignition and combustion process and the lean operation limit in a spark ignition engine

Seima Tsuboi, Shinji Miyokawa, Masayoshi Matsuda, Takeshi Yokomori, Norimasa Iida

Research output: Contribution to journalArticle

2 Citations (Scopus)

Abstract

Lean combustion technologies have been investigated to decrease the heat loss of spark ignition engines. However, as the excess air ratio approaches the lean operation limit, the cycle-to-cycle variation of combustion becomes an obstacle to improving thermal efficiency. This paper discusses the influences of spark discharge characteristics, such as discharge current and spark-shortening phenomena, on the ignition and combustion process under lean conditions (excess air ratio (λ) of 1.8–2.3) to suppress the cycle-to-cycle variation of combustion and extend the lean operation limit. In this study, a customized inductive ignition system equipped with 20 conventional ignition coils was applied to enhance the ignition energy. The discharge interval between each coil unit was controlled to change the discharge current and duration. The results show that the in-cylinder discharged energy increased with the discharge interval. The cycle-to-cycle variation of combustion was minimized when the discharge interval was 0.4 ms, and consequently, the lean operation limit was extended to an excess air ratio (λ) of 2.1. The discharge waveforms indicated that the longer discharge interval could promote spark-shortening phenomena such as re-strike due to the lower discharge current. Finally, in-cylinder photographs of ignition and combustion process showed that the flame kernel formation could be promoted by the repetition of spark-shortening phenomena such as re-strike, as well as by the high elongation of the spark channel.

Original languageEnglish
Pages (from-to)617-632
Number of pages16
JournalApplied Energy
Volume250
DOIs
Publication statusPublished - 2019 Sep 15

Fingerprint

Internal combustion engines
Electric sparks
Ignition
engine
combustion
Engine cylinders
Air
Ignition systems
air
Heat losses
Discharge (fluid mechanics)
Elongation
photograph
energy

Keywords

  • Flame kernel
  • Ignition
  • Lean burn
  • Multiple spark discharge
  • SI combustion
  • Spark discharge energy

ASJC Scopus subject areas

  • Building and Construction
  • Energy(all)
  • Mechanical Engineering
  • Management, Monitoring, Policy and Law

Cite this

Influence of spark discharge characteristics on ignition and combustion process and the lean operation limit in a spark ignition engine. / Tsuboi, Seima; Miyokawa, Shinji; Matsuda, Masayoshi; Yokomori, Takeshi; Iida, Norimasa.

In: Applied Energy, Vol. 250, 15.09.2019, p. 617-632.

Research output: Contribution to journalArticle

@article{bf99d8124a5a4f9eb89695a4a5123e62,
title = "Influence of spark discharge characteristics on ignition and combustion process and the lean operation limit in a spark ignition engine",
abstract = "Lean combustion technologies have been investigated to decrease the heat loss of spark ignition engines. However, as the excess air ratio approaches the lean operation limit, the cycle-to-cycle variation of combustion becomes an obstacle to improving thermal efficiency. This paper discusses the influences of spark discharge characteristics, such as discharge current and spark-shortening phenomena, on the ignition and combustion process under lean conditions (excess air ratio (λ) of 1.8–2.3) to suppress the cycle-to-cycle variation of combustion and extend the lean operation limit. In this study, a customized inductive ignition system equipped with 20 conventional ignition coils was applied to enhance the ignition energy. The discharge interval between each coil unit was controlled to change the discharge current and duration. The results show that the in-cylinder discharged energy increased with the discharge interval. The cycle-to-cycle variation of combustion was minimized when the discharge interval was 0.4 ms, and consequently, the lean operation limit was extended to an excess air ratio (λ) of 2.1. The discharge waveforms indicated that the longer discharge interval could promote spark-shortening phenomena such as re-strike due to the lower discharge current. Finally, in-cylinder photographs of ignition and combustion process showed that the flame kernel formation could be promoted by the repetition of spark-shortening phenomena such as re-strike, as well as by the high elongation of the spark channel.",
keywords = "Flame kernel, Ignition, Lean burn, Multiple spark discharge, SI combustion, Spark discharge energy",
author = "Seima Tsuboi and Shinji Miyokawa and Masayoshi Matsuda and Takeshi Yokomori and Norimasa Iida",
year = "2019",
month = "9",
day = "15",
doi = "10.1016/j.apenergy.2019.05.036",
language = "English",
volume = "250",
pages = "617--632",
journal = "Applied Energy",
issn = "0306-2619",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Influence of spark discharge characteristics on ignition and combustion process and the lean operation limit in a spark ignition engine

AU - Tsuboi, Seima

AU - Miyokawa, Shinji

AU - Matsuda, Masayoshi

AU - Yokomori, Takeshi

AU - Iida, Norimasa

PY - 2019/9/15

Y1 - 2019/9/15

N2 - Lean combustion technologies have been investigated to decrease the heat loss of spark ignition engines. However, as the excess air ratio approaches the lean operation limit, the cycle-to-cycle variation of combustion becomes an obstacle to improving thermal efficiency. This paper discusses the influences of spark discharge characteristics, such as discharge current and spark-shortening phenomena, on the ignition and combustion process under lean conditions (excess air ratio (λ) of 1.8–2.3) to suppress the cycle-to-cycle variation of combustion and extend the lean operation limit. In this study, a customized inductive ignition system equipped with 20 conventional ignition coils was applied to enhance the ignition energy. The discharge interval between each coil unit was controlled to change the discharge current and duration. The results show that the in-cylinder discharged energy increased with the discharge interval. The cycle-to-cycle variation of combustion was minimized when the discharge interval was 0.4 ms, and consequently, the lean operation limit was extended to an excess air ratio (λ) of 2.1. The discharge waveforms indicated that the longer discharge interval could promote spark-shortening phenomena such as re-strike due to the lower discharge current. Finally, in-cylinder photographs of ignition and combustion process showed that the flame kernel formation could be promoted by the repetition of spark-shortening phenomena such as re-strike, as well as by the high elongation of the spark channel.

AB - Lean combustion technologies have been investigated to decrease the heat loss of spark ignition engines. However, as the excess air ratio approaches the lean operation limit, the cycle-to-cycle variation of combustion becomes an obstacle to improving thermal efficiency. This paper discusses the influences of spark discharge characteristics, such as discharge current and spark-shortening phenomena, on the ignition and combustion process under lean conditions (excess air ratio (λ) of 1.8–2.3) to suppress the cycle-to-cycle variation of combustion and extend the lean operation limit. In this study, a customized inductive ignition system equipped with 20 conventional ignition coils was applied to enhance the ignition energy. The discharge interval between each coil unit was controlled to change the discharge current and duration. The results show that the in-cylinder discharged energy increased with the discharge interval. The cycle-to-cycle variation of combustion was minimized when the discharge interval was 0.4 ms, and consequently, the lean operation limit was extended to an excess air ratio (λ) of 2.1. The discharge waveforms indicated that the longer discharge interval could promote spark-shortening phenomena such as re-strike due to the lower discharge current. Finally, in-cylinder photographs of ignition and combustion process showed that the flame kernel formation could be promoted by the repetition of spark-shortening phenomena such as re-strike, as well as by the high elongation of the spark channel.

KW - Flame kernel

KW - Ignition

KW - Lean burn

KW - Multiple spark discharge

KW - SI combustion

KW - Spark discharge energy

UR - http://www.scopus.com/inward/record.url?scp=85065429568&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85065429568&partnerID=8YFLogxK

U2 - 10.1016/j.apenergy.2019.05.036

DO - 10.1016/j.apenergy.2019.05.036

M3 - Article

VL - 250

SP - 617

EP - 632

JO - Applied Energy

JF - Applied Energy

SN - 0306-2619

ER -