Influence of ZIF-8 modification on performance of ZnO-based dye-sensitized solar cells

Research output: Contribution to journalArticlepeer-review

Abstract

Metal–organic frameworks (MOFs) were used to modify the surface of nanoparticulate ZnO electrodes, aiming at enhancing the performance of dye-sensitized solar cells (DSSCs). Zeolitic imidazolate framework-8 (ZIF-8) consisting of Zn2+ ions and 2-methylimidazolates was chosen and their concentrations in precursor solutions were set as experimental conditions for the MOF-modification. A thin ZIF-8 layer with a thickness of 3 nm could be formed on the ZnO surface by immersing the ZnO film in a high-concentration precursor solution at room temperature, as confirmed by field-emission transmission electron microscopy, X-ray diffraction analysis, and X-ray photoelectron spectroscopy. However, both short-circuit photocurrent density (JSC) and open-circuit photovoltage of the cell using the above ZIF-8-modified electrode were decreased probably because of the inhibition of the electron injection from photoexcited dyes. In contrast, the immersion of the ZnO film in a low-concentration precursor solution was found to be effective in enhancing JSC, which was explained by the improved charge transfer through the surface passivation of the ZnO electrode. Another positive effect was the improved durability observed in the cell using the modified electrode.

Original languageEnglish
Pages (from-to)75-83
Number of pages9
JournalJournal of Solid State Electrochemistry
Volume27
Issue number1
DOIs
Publication statusPublished - 2023 Jan

Keywords

  • Dye-sensitized solar cells
  • Metal–organic frameworks
  • Surface modification
  • ZIF-8
  • ZnO

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Electrochemistry
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Influence of ZIF-8 modification on performance of ZnO-based dye-sensitized solar cells'. Together they form a unique fingerprint.

Cite this