Abstract
Bubbles will be produced in the lubricant film of hydrostatic bearings caused by the hydrodynamically generated negative pressure. The production of bubbles should be avoided because bubbles in lubricant films have undesirable effects on bearing performances. The limit of bubbles production in the sector shaped recesses of hydrostatic thrust bearings is experimentally and theoretically investigated. Effects of the spindle tilt on bubbles production in recesses are also analysed. (from English abstract)
| Original language | English |
|---|---|
| Pages (from-to) | 411-417 |
| Number of pages | 7 |
| Journal | J. JAPAN SOC. PRECIS. ENGNG. |
| Volume | 47 |
| Issue number | 4 , Apr. 1981 |
| Publication status | Published - 1981 |
| Externally published | Yes |
Fingerprint
ASJC Scopus subject areas
- Engineering(all)
Cite this
Limit of bubbles production in hydrostatic thrust bearings. / Aoyama, Tojiro; Inasaki, I.; Yonetsu, S.
In: J. JAPAN SOC. PRECIS. ENGNG., Vol. 47, No. 4 , Apr. 1981, 1981, p. 411-417.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Limit of bubbles production in hydrostatic thrust bearings.
AU - Aoyama, Tojiro
AU - Inasaki, I.
AU - Yonetsu, S.
PY - 1981
Y1 - 1981
N2 - Bubbles will be produced in the lubricant film of hydrostatic bearings caused by the hydrodynamically generated negative pressure. The production of bubbles should be avoided because bubbles in lubricant films have undesirable effects on bearing performances. The limit of bubbles production in the sector shaped recesses of hydrostatic thrust bearings is experimentally and theoretically investigated. Effects of the spindle tilt on bubbles production in recesses are also analysed. (from English abstract)
AB - Bubbles will be produced in the lubricant film of hydrostatic bearings caused by the hydrodynamically generated negative pressure. The production of bubbles should be avoided because bubbles in lubricant films have undesirable effects on bearing performances. The limit of bubbles production in the sector shaped recesses of hydrostatic thrust bearings is experimentally and theoretically investigated. Effects of the spindle tilt on bubbles production in recesses are also analysed. (from English abstract)
UR - http://www.scopus.com/inward/record.url?scp=0019383819&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0019383819&partnerID=8YFLogxK
M3 - Article
AN - SCOPUS:0019383819
VL - 47
SP - 411
EP - 417
JO - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering
JF - Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering
SN - 0912-0289
IS - 4 , Apr. 1981
ER -