Abstract
The timing jitter measurement scheme for low repetition rate pulse train is proposed. Measuring a spectrum of upconverted light generated from frequency mixing with a transform limited reference pulse and a linear-chirped amplified pulse, a relative time lag between two pulses can be obtained. The measurable range and resolution with this method are discussed.
| Original language | English |
|---|---|
| Title of host publication | Proceedings of SPIE - The International Society for Optical Engineering |
| Publisher | Society of Photo-Optical Instrumentation Engineers |
| Pages | 165-172 |
| Number of pages | 8 |
| Volume | 3616 |
| Publication status | Published - 1999 |
| Event | Proceedings of the 1999 Commercial and Biomedical Applications of Ultrafast Lasers - San Jose, CA, USA Duration: 1999 Jan 28 → 1999 Jan 29 |
Other
| Other | Proceedings of the 1999 Commercial and Biomedical Applications of Ultrafast Lasers |
|---|---|
| City | San Jose, CA, USA |
| Period | 99/1/28 → 99/1/29 |
Fingerprint
ASJC Scopus subject areas
- Electrical and Electronic Engineering
- Condensed Matter Physics
Cite this
Measurement of the timing jitter in a kHz regenerative amplifier system. / Miura, Taisuke; Kobayashi, Katsuyuki; Zhang, Zhigang; Torizuka, Kenji; Kannari, Fumihiko.
Proceedings of SPIE - The International Society for Optical Engineering. Vol. 3616 Society of Photo-Optical Instrumentation Engineers, 1999. p. 165-172.Research output: Chapter in Book/Report/Conference proceeding › Chapter
}
TY - CHAP
T1 - Measurement of the timing jitter in a kHz regenerative amplifier system
AU - Miura, Taisuke
AU - Kobayashi, Katsuyuki
AU - Zhang, Zhigang
AU - Torizuka, Kenji
AU - Kannari, Fumihiko
PY - 1999
Y1 - 1999
N2 - The timing jitter measurement scheme for low repetition rate pulse train is proposed. Measuring a spectrum of upconverted light generated from frequency mixing with a transform limited reference pulse and a linear-chirped amplified pulse, a relative time lag between two pulses can be obtained. The measurable range and resolution with this method are discussed.
AB - The timing jitter measurement scheme for low repetition rate pulse train is proposed. Measuring a spectrum of upconverted light generated from frequency mixing with a transform limited reference pulse and a linear-chirped amplified pulse, a relative time lag between two pulses can be obtained. The measurable range and resolution with this method are discussed.
UR - http://www.scopus.com/inward/record.url?scp=0032627461&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0032627461&partnerID=8YFLogxK
M3 - Chapter
AN - SCOPUS:0032627461
VL - 3616
SP - 165
EP - 172
BT - Proceedings of SPIE - The International Society for Optical Engineering
PB - Society of Photo-Optical Instrumentation Engineers
ER -