Microprocessor-Controlled DC Motor for Load-Insensitive Position Servo System

Kiyoshi Ohishi, Masato Nakao, Kouhei Ohnishi, Kunio Miyachi

Research output: Contribution to journalArticle

Abstract

The conventional proportional P controller has been often used as the position controller of the dc servo motor. When the unknown and inaccessible load torque, such as the coulomb friction, the gravity, and so on, is imposed on the dc servo motor, this control system has the steady- and/or transient-state error. This error will be reduced by a new method in the paper, which is based on the observer theory and programmed in the microprocessor. The deadbeat observer in this paper can estimate the sum of all the external forces quickly with a very simple structure. The new torque regulator based on this observer is expected to realize no steady-state-error and little transient-state-error position control even in employing only the P controller, whether various types of external force are imposed or not. Moreover, according to the observer theory, this system has merit in that this response to the external force can be determined independently of the response to the position reference. Numerical and experimental results are also shown.

Original languageEnglish
Pages (from-to)44-49
Number of pages6
JournalIEEE Transactions on Industrial Electronics
VolumeIE-34
Issue number1
DOIs
Publication statusPublished - 1987

Fingerprint

DC motors
Servomechanisms
Microprocessor chips
Controllers
Torque
Position control
System theory
Loads (forces)
Gravitation
Friction
Control systems

ASJC Scopus subject areas

  • Computer Science Applications
  • Control and Systems Engineering
  • Electrical and Electronic Engineering

Cite this

Microprocessor-Controlled DC Motor for Load-Insensitive Position Servo System. / Ohishi, Kiyoshi; Nakao, Masato; Ohnishi, Kouhei; Miyachi, Kunio.

In: IEEE Transactions on Industrial Electronics, Vol. IE-34, No. 1, 1987, p. 44-49.

Research output: Contribution to journalArticle

Ohishi, Kiyoshi ; Nakao, Masato ; Ohnishi, Kouhei ; Miyachi, Kunio. / Microprocessor-Controlled DC Motor for Load-Insensitive Position Servo System. In: IEEE Transactions on Industrial Electronics. 1987 ; Vol. IE-34, No. 1. pp. 44-49.
@article{faeb9de5f41443ec9e178408459ead64,
title = "Microprocessor-Controlled DC Motor for Load-Insensitive Position Servo System",
abstract = "The conventional proportional P controller has been often used as the position controller of the dc servo motor. When the unknown and inaccessible load torque, such as the coulomb friction, the gravity, and so on, is imposed on the dc servo motor, this control system has the steady- and/or transient-state error. This error will be reduced by a new method in the paper, which is based on the observer theory and programmed in the microprocessor. The deadbeat observer in this paper can estimate the sum of all the external forces quickly with a very simple structure. The new torque regulator based on this observer is expected to realize no steady-state-error and little transient-state-error position control even in employing only the P controller, whether various types of external force are imposed or not. Moreover, according to the observer theory, this system has merit in that this response to the external force can be determined independently of the response to the position reference. Numerical and experimental results are also shown.",
author = "Kiyoshi Ohishi and Masato Nakao and Kouhei Ohnishi and Kunio Miyachi",
year = "1987",
doi = "10.1109/TIE.1987.350923",
language = "English",
volume = "IE-34",
pages = "44--49",
journal = "IEEE Transactions on Industrial Electronics",
issn = "0278-0046",
publisher = "IEEE Industrial Electronics Society",
number = "1",

}

TY - JOUR

T1 - Microprocessor-Controlled DC Motor for Load-Insensitive Position Servo System

AU - Ohishi, Kiyoshi

AU - Nakao, Masato

AU - Ohnishi, Kouhei

AU - Miyachi, Kunio

PY - 1987

Y1 - 1987

N2 - The conventional proportional P controller has been often used as the position controller of the dc servo motor. When the unknown and inaccessible load torque, such as the coulomb friction, the gravity, and so on, is imposed on the dc servo motor, this control system has the steady- and/or transient-state error. This error will be reduced by a new method in the paper, which is based on the observer theory and programmed in the microprocessor. The deadbeat observer in this paper can estimate the sum of all the external forces quickly with a very simple structure. The new torque regulator based on this observer is expected to realize no steady-state-error and little transient-state-error position control even in employing only the P controller, whether various types of external force are imposed or not. Moreover, according to the observer theory, this system has merit in that this response to the external force can be determined independently of the response to the position reference. Numerical and experimental results are also shown.

AB - The conventional proportional P controller has been often used as the position controller of the dc servo motor. When the unknown and inaccessible load torque, such as the coulomb friction, the gravity, and so on, is imposed on the dc servo motor, this control system has the steady- and/or transient-state error. This error will be reduced by a new method in the paper, which is based on the observer theory and programmed in the microprocessor. The deadbeat observer in this paper can estimate the sum of all the external forces quickly with a very simple structure. The new torque regulator based on this observer is expected to realize no steady-state-error and little transient-state-error position control even in employing only the P controller, whether various types of external force are imposed or not. Moreover, according to the observer theory, this system has merit in that this response to the external force can be determined independently of the response to the position reference. Numerical and experimental results are also shown.

UR - http://www.scopus.com/inward/record.url?scp=84939334317&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84939334317&partnerID=8YFLogxK

U2 - 10.1109/TIE.1987.350923

DO - 10.1109/TIE.1987.350923

M3 - Article

VL - IE-34

SP - 44

EP - 49

JO - IEEE Transactions on Industrial Electronics

JF - IEEE Transactions on Industrial Electronics

SN - 0278-0046

IS - 1

ER -