Modal system design of multirobot systems by interaction mode control

Seiichiro Katsura, Kiyoshi Ohishi

Research output: Contribution to journalArticle

170 Citations (Scopus)

Abstract

Motion control technology in an open environment will be more important. Future motion systems should interact with other systems or environments. To adapt to complicated environments and do tasks, a realization of multi-degree-of-freedom motion is necessary for human cooperating motion. This paper proposes a unified control approach for multirobot systems by interaction mode control. The proposed interaction mode control considers only interactions between systems. The interactions are abstracted by using mode quarry matrices. Since the transformed modes are independent of each other, it is possible to design a controller in decoupled modal space. This paper also proposes a novel control index named "hybrid ratio." Hybrid ratio is defined as the influence of external acceleration input on the acceleration response of a system. Since it is possible to realize the assigned hybrid ratio in each mode according to the task, the motion command with hybrid ratio is represented as task code. Thus, the interaction mode control is able to be treated as task kinematics. The proposed interaction mode control is applied for grasping motion by multirobot systems. The numerical and experimental results show the viability of the proposed method.

Original languageEnglish
Pages (from-to)1537-1546
Number of pages10
JournalIEEE Transactions on Industrial Electronics
Volume54
Issue number3
DOIs
Publication statusPublished - 2007 Jun
Externally publishedYes

Fingerprint

Systems analysis
Quarries
Motion control
Kinematics
Controllers

Keywords

  • Acceleration control
  • Disturbance observer
  • Haptics
  • Hybrid control
  • Interaction mode control
  • Modal decomposition
  • Motion control
  • Multirobot systems

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Control and Systems Engineering
  • Computer Science Applications

Cite this

Modal system design of multirobot systems by interaction mode control. / Katsura, Seiichiro; Ohishi, Kiyoshi.

In: IEEE Transactions on Industrial Electronics, Vol. 54, No. 3, 06.2007, p. 1537-1546.

Research output: Contribution to journalArticle

@article{849664f12b3b45238f4a8cd46a8144ac,
title = "Modal system design of multirobot systems by interaction mode control",
abstract = "Motion control technology in an open environment will be more important. Future motion systems should interact with other systems or environments. To adapt to complicated environments and do tasks, a realization of multi-degree-of-freedom motion is necessary for human cooperating motion. This paper proposes a unified control approach for multirobot systems by interaction mode control. The proposed interaction mode control considers only interactions between systems. The interactions are abstracted by using mode quarry matrices. Since the transformed modes are independent of each other, it is possible to design a controller in decoupled modal space. This paper also proposes a novel control index named {"}hybrid ratio.{"} Hybrid ratio is defined as the influence of external acceleration input on the acceleration response of a system. Since it is possible to realize the assigned hybrid ratio in each mode according to the task, the motion command with hybrid ratio is represented as task code. Thus, the interaction mode control is able to be treated as task kinematics. The proposed interaction mode control is applied for grasping motion by multirobot systems. The numerical and experimental results show the viability of the proposed method.",
keywords = "Acceleration control, Disturbance observer, Haptics, Hybrid control, Interaction mode control, Modal decomposition, Motion control, Multirobot systems",
author = "Seiichiro Katsura and Kiyoshi Ohishi",
year = "2007",
month = "6",
doi = "10.1109/TIE.2007.894704",
language = "English",
volume = "54",
pages = "1537--1546",
journal = "IEEE Transactions on Industrial Electronics",
issn = "0278-0046",
publisher = "IEEE Industrial Electronics Society",
number = "3",

}

TY - JOUR

T1 - Modal system design of multirobot systems by interaction mode control

AU - Katsura, Seiichiro

AU - Ohishi, Kiyoshi

PY - 2007/6

Y1 - 2007/6

N2 - Motion control technology in an open environment will be more important. Future motion systems should interact with other systems or environments. To adapt to complicated environments and do tasks, a realization of multi-degree-of-freedom motion is necessary for human cooperating motion. This paper proposes a unified control approach for multirobot systems by interaction mode control. The proposed interaction mode control considers only interactions between systems. The interactions are abstracted by using mode quarry matrices. Since the transformed modes are independent of each other, it is possible to design a controller in decoupled modal space. This paper also proposes a novel control index named "hybrid ratio." Hybrid ratio is defined as the influence of external acceleration input on the acceleration response of a system. Since it is possible to realize the assigned hybrid ratio in each mode according to the task, the motion command with hybrid ratio is represented as task code. Thus, the interaction mode control is able to be treated as task kinematics. The proposed interaction mode control is applied for grasping motion by multirobot systems. The numerical and experimental results show the viability of the proposed method.

AB - Motion control technology in an open environment will be more important. Future motion systems should interact with other systems or environments. To adapt to complicated environments and do tasks, a realization of multi-degree-of-freedom motion is necessary for human cooperating motion. This paper proposes a unified control approach for multirobot systems by interaction mode control. The proposed interaction mode control considers only interactions between systems. The interactions are abstracted by using mode quarry matrices. Since the transformed modes are independent of each other, it is possible to design a controller in decoupled modal space. This paper also proposes a novel control index named "hybrid ratio." Hybrid ratio is defined as the influence of external acceleration input on the acceleration response of a system. Since it is possible to realize the assigned hybrid ratio in each mode according to the task, the motion command with hybrid ratio is represented as task code. Thus, the interaction mode control is able to be treated as task kinematics. The proposed interaction mode control is applied for grasping motion by multirobot systems. The numerical and experimental results show the viability of the proposed method.

KW - Acceleration control

KW - Disturbance observer

KW - Haptics

KW - Hybrid control

KW - Interaction mode control

KW - Modal decomposition

KW - Motion control

KW - Multirobot systems

UR - http://www.scopus.com/inward/record.url?scp=44949169288&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=44949169288&partnerID=8YFLogxK

U2 - 10.1109/TIE.2007.894704

DO - 10.1109/TIE.2007.894704

M3 - Article

AN - SCOPUS:44949169288

VL - 54

SP - 1537

EP - 1546

JO - IEEE Transactions on Industrial Electronics

JF - IEEE Transactions on Industrial Electronics

SN - 0278-0046

IS - 3

ER -