Model Validation Criteria for System Identification in Time Domain

Hideo Muroi, Shuichi Adachi

Research output: Contribution to journalArticlepeer-review

7 Citations (Scopus)

Abstract

The fit ratio is one of the most commonly used criteria to evaluate a result of system identification in the time domain. This criterion is given by the root mean squared error (RMSE) divided by the standard deviation of the measured signal. However, the fit ratio has some problems. For example, it can take negative values because it is not normalized, and it is easy to obtain a better value for a low-amplitude signal than for a high-amplitude signal. In this paper, we introduce some normalized criteria from the field of physical geography and consider criteria that resolve these problems. We evaluated these criteria through two case studies. We found that the correlation coefficient was effective to evaluate the phase, and a criterion obtained from the triangle inequality was effective for evaluating the gain and phase.

Original languageEnglish
Pages (from-to)86-91
Number of pages6
JournalIFAC-PapersOnLine
Volume48
Issue number28
DOIs
Publication statusPublished - 2015

Keywords

  • Correlation coefficients
  • Error criteria
  • System identification
  • Time domain
  • Validation

ASJC Scopus subject areas

  • Control and Systems Engineering

Fingerprint Dive into the research topics of 'Model Validation Criteria for System Identification in Time Domain'. Together they form a unique fingerprint.

Cite this