Modification of boron-doped diamond electrodes with platinum to increase the stability and sensitivity of haemoglobin-based acrylamide sensors

Retno Wulandari, Tribidasari Anggraningrum Ivandini, Irkham, Endang Saepudin, Yasuaki Einaga

Research output: Contribution to journalArticle

Abstract

Boron-doped diamond (BDD) electrodes modified with platinum and haemoglobin (Hb) have been prepared for application as stable and sensitive acrylamide biosensors. The Platinum-modified BDD (Pt-BDD) was prepared in several steps, including the wet chemical seeding of Pt particles, the electrochemical overgrowth of Pt seeds, thermal annealing at 700 °C under N 2 atmosphere, as well as refresh and activation steps of Pt-BDD by cyclic voltammetry (CV). The characterization of the prepared Pt-BDD using scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) and X-ray photoelectron spectroscopy (XPS) showed that the method can deposit Pt homogenously on the BDD surface with an average particle size of around 200 nm. The Raman results showed that the treatment steps during modification did not damage the sp 3 carbon in the BDD structure. After modification with Hb, the modified BDD was examined for acrylamide detection. CVs of Hb-Pt-modified BDD (Hb-Pt-BDD) in 0.2 M acetate buffer saline (ABS) (pH 4.8) containing acrylamide in the concentration range of 0.01 to 1 nM showed linear responses with a detection limit of 0.0085 nM and a quantification limit of 0.026 nM. The excellent stability of the prepared Pt-BDD was confirmed as it showed the reusability of Pt-BDD by removing the Hb adduct without removing Pt on the BDD surface.

Original languageEnglish
Pages (from-to)1105-1117
Number of pages13
JournalSensors and Materials
Volume31
Issue number4
DOIs
Publication statusPublished - 2019 Jan 1

Fingerprint

Diamond
Boron
Acrylamide
Hemoglobin
hemoglobin
Platinum
Diamonds
Hemoglobins
boron
platinum
diamonds
Electrodes
electrodes
sensitivity
sensors
Sensors
Reusability
inoculation
bioinstrumentation
Biosensors

Keywords

  • Acrylamide
  • Boron-doped diamond
  • Electrochemical detection
  • Platinum
  • Surface modification

ASJC Scopus subject areas

  • Instrumentation
  • Materials Science(all)

Cite this

Modification of boron-doped diamond electrodes with platinum to increase the stability and sensitivity of haemoglobin-based acrylamide sensors. / Wulandari, Retno; Ivandini, Tribidasari Anggraningrum; Irkham; Saepudin, Endang; Einaga, Yasuaki.

In: Sensors and Materials, Vol. 31, No. 4, 01.01.2019, p. 1105-1117.

Research output: Contribution to journalArticle

Wulandari, Retno ; Ivandini, Tribidasari Anggraningrum ; Irkham ; Saepudin, Endang ; Einaga, Yasuaki. / Modification of boron-doped diamond electrodes with platinum to increase the stability and sensitivity of haemoglobin-based acrylamide sensors. In: Sensors and Materials. 2019 ; Vol. 31, No. 4. pp. 1105-1117.
@article{1ae9defccaa541e782e4d5ccf8284f76,
title = "Modification of boron-doped diamond electrodes with platinum to increase the stability and sensitivity of haemoglobin-based acrylamide sensors",
abstract = "Boron-doped diamond (BDD) electrodes modified with platinum and haemoglobin (Hb) have been prepared for application as stable and sensitive acrylamide biosensors. The Platinum-modified BDD (Pt-BDD) was prepared in several steps, including the wet chemical seeding of Pt particles, the electrochemical overgrowth of Pt seeds, thermal annealing at 700 °C under N 2 atmosphere, as well as refresh and activation steps of Pt-BDD by cyclic voltammetry (CV). The characterization of the prepared Pt-BDD using scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) and X-ray photoelectron spectroscopy (XPS) showed that the method can deposit Pt homogenously on the BDD surface with an average particle size of around 200 nm. The Raman results showed that the treatment steps during modification did not damage the sp 3 carbon in the BDD structure. After modification with Hb, the modified BDD was examined for acrylamide detection. CVs of Hb-Pt-modified BDD (Hb-Pt-BDD) in 0.2 M acetate buffer saline (ABS) (pH 4.8) containing acrylamide in the concentration range of 0.01 to 1 nM showed linear responses with a detection limit of 0.0085 nM and a quantification limit of 0.026 nM. The excellent stability of the prepared Pt-BDD was confirmed as it showed the reusability of Pt-BDD by removing the Hb adduct without removing Pt on the BDD surface.",
keywords = "Acrylamide, Boron-doped diamond, Electrochemical detection, Platinum, Surface modification",
author = "Retno Wulandari and Ivandini, {Tribidasari Anggraningrum} and Irkham and Endang Saepudin and Yasuaki Einaga",
year = "2019",
month = "1",
day = "1",
doi = "10.18494/SAM.2019.2192",
language = "English",
volume = "31",
pages = "1105--1117",
journal = "Sensors and Materials",
issn = "0914-4935",
publisher = "M Y U Scientific Publishing Division",
number = "4",

}

TY - JOUR

T1 - Modification of boron-doped diamond electrodes with platinum to increase the stability and sensitivity of haemoglobin-based acrylamide sensors

AU - Wulandari, Retno

AU - Ivandini, Tribidasari Anggraningrum

AU - Irkham,

AU - Saepudin, Endang

AU - Einaga, Yasuaki

PY - 2019/1/1

Y1 - 2019/1/1

N2 - Boron-doped diamond (BDD) electrodes modified with platinum and haemoglobin (Hb) have been prepared for application as stable and sensitive acrylamide biosensors. The Platinum-modified BDD (Pt-BDD) was prepared in several steps, including the wet chemical seeding of Pt particles, the electrochemical overgrowth of Pt seeds, thermal annealing at 700 °C under N 2 atmosphere, as well as refresh and activation steps of Pt-BDD by cyclic voltammetry (CV). The characterization of the prepared Pt-BDD using scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) and X-ray photoelectron spectroscopy (XPS) showed that the method can deposit Pt homogenously on the BDD surface with an average particle size of around 200 nm. The Raman results showed that the treatment steps during modification did not damage the sp 3 carbon in the BDD structure. After modification with Hb, the modified BDD was examined for acrylamide detection. CVs of Hb-Pt-modified BDD (Hb-Pt-BDD) in 0.2 M acetate buffer saline (ABS) (pH 4.8) containing acrylamide in the concentration range of 0.01 to 1 nM showed linear responses with a detection limit of 0.0085 nM and a quantification limit of 0.026 nM. The excellent stability of the prepared Pt-BDD was confirmed as it showed the reusability of Pt-BDD by removing the Hb adduct without removing Pt on the BDD surface.

AB - Boron-doped diamond (BDD) electrodes modified with platinum and haemoglobin (Hb) have been prepared for application as stable and sensitive acrylamide biosensors. The Platinum-modified BDD (Pt-BDD) was prepared in several steps, including the wet chemical seeding of Pt particles, the electrochemical overgrowth of Pt seeds, thermal annealing at 700 °C under N 2 atmosphere, as well as refresh and activation steps of Pt-BDD by cyclic voltammetry (CV). The characterization of the prepared Pt-BDD using scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS) and X-ray photoelectron spectroscopy (XPS) showed that the method can deposit Pt homogenously on the BDD surface with an average particle size of around 200 nm. The Raman results showed that the treatment steps during modification did not damage the sp 3 carbon in the BDD structure. After modification with Hb, the modified BDD was examined for acrylamide detection. CVs of Hb-Pt-modified BDD (Hb-Pt-BDD) in 0.2 M acetate buffer saline (ABS) (pH 4.8) containing acrylamide in the concentration range of 0.01 to 1 nM showed linear responses with a detection limit of 0.0085 nM and a quantification limit of 0.026 nM. The excellent stability of the prepared Pt-BDD was confirmed as it showed the reusability of Pt-BDD by removing the Hb adduct without removing Pt on the BDD surface.

KW - Acrylamide

KW - Boron-doped diamond

KW - Electrochemical detection

KW - Platinum

KW - Surface modification

UR - http://www.scopus.com/inward/record.url?scp=85064655054&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85064655054&partnerID=8YFLogxK

U2 - 10.18494/SAM.2019.2192

DO - 10.18494/SAM.2019.2192

M3 - Article

VL - 31

SP - 1105

EP - 1117

JO - Sensors and Materials

JF - Sensors and Materials

SN - 0914-4935

IS - 4

ER -