Modified optical coefficient measurements using a single high-NA fiber with detection parameter changes at a tip

Haruna Nakazawa, Marika Doi, Emiyu Ogawa, Tsunenori Arai

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

To avoid the instability of an optical coefficient measurement using sliced tissue preparation, an attenuation coefficient measurement by puncturing an optical fiber in bulk tissue have been reported. We proposed a modified puncturing method to obtain an absorption coefficient and scattering coefficient by increasing optical information. We used the light intensity measurement through a single high-NA fiber puncturing into an optically thick bulk tissue varying detection parameters, the depth and field of view (FOV), at the tip. The light intensity measurement and ray trace calculation using the Monte Carlo method (inverse or normal) were employed. We constructed the measurement system which can change the FOV at the fiber tip inside the bulk tissue using the variable aperture outside the bulk tissue. A 200 μmΦ NA:0.5 fiber installed in a 21G needle was punctured down to surface of the bulk tissue to measure light intensity in the bulk tissue. Using homogeneous optical model solution, the accuracy about attenuation coefficients of the constructed experimental system was confirmed. The error in the attenuation coefficient was up to 1.4%. We demonstrated the optical coefficient measurement of porcine myocardium using the proposed method. To fit dependence of the measured attenuation coefficients on FOV, we decided that the absorption coefficient, the scattering coefficient, and anisotropic parameter were 0.2 mm-1, 10 mm-1, and 0.96, respectively. We proposed modified puncturing optical coefficient measurement varying depth and FOV. We demonstrated its usefulness on myocardium.

Original languageEnglish
Title of host publicationOptics in Health Care and Biomedical Optics VIII
EditorsYing Gu, Qingming Luo, Xingde Li, Yuguo Tang, Dan Zhu
PublisherSPIE
Volume10820
ISBN (Electronic)9781510622388
DOIs
Publication statusPublished - 2018 Jan 1
EventOptics in Health Care and Biomedical Optics VIII 2018 - Beijing, China
Duration: 2018 Oct 112018 Oct 13

Other

OtherOptics in Health Care and Biomedical Optics VIII 2018
CountryChina
CityBeijing
Period18/10/1118/10/13

Fingerprint

piercing
Fiber
Tissue
Piercing
attenuation coefficients
fibers
Fibers
Coefficient
coefficients
field of view
Field of View
Attenuation
luminous intensity
myocardium
Light Intensity
scattering coefficients
Myocardium
Absorption Coefficient
absorptivity
Scattering

Keywords

  • bulk tissue
  • field of view
  • Inverse Monte Carlo
  • light intensity measurement
  • optical coefficients
  • ray tracing calculation

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Computer Science Applications
  • Applied Mathematics
  • Electrical and Electronic Engineering

Cite this

Nakazawa, H., Doi, M., Ogawa, E., & Arai, T. (2018). Modified optical coefficient measurements using a single high-NA fiber with detection parameter changes at a tip. In Y. Gu, Q. Luo, X. Li, Y. Tang, & D. Zhu (Eds.), Optics in Health Care and Biomedical Optics VIII (Vol. 10820). [1082020] SPIE. https://doi.org/10.1117/12.2500742

Modified optical coefficient measurements using a single high-NA fiber with detection parameter changes at a tip. / Nakazawa, Haruna; Doi, Marika; Ogawa, Emiyu; Arai, Tsunenori.

Optics in Health Care and Biomedical Optics VIII. ed. / Ying Gu; Qingming Luo; Xingde Li; Yuguo Tang; Dan Zhu. Vol. 10820 SPIE, 2018. 1082020.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Nakazawa, H, Doi, M, Ogawa, E & Arai, T 2018, Modified optical coefficient measurements using a single high-NA fiber with detection parameter changes at a tip. in Y Gu, Q Luo, X Li, Y Tang & D Zhu (eds), Optics in Health Care and Biomedical Optics VIII. vol. 10820, 1082020, SPIE, Optics in Health Care and Biomedical Optics VIII 2018, Beijing, China, 18/10/11. https://doi.org/10.1117/12.2500742
Nakazawa H, Doi M, Ogawa E, Arai T. Modified optical coefficient measurements using a single high-NA fiber with detection parameter changes at a tip. In Gu Y, Luo Q, Li X, Tang Y, Zhu D, editors, Optics in Health Care and Biomedical Optics VIII. Vol. 10820. SPIE. 2018. 1082020 https://doi.org/10.1117/12.2500742
Nakazawa, Haruna ; Doi, Marika ; Ogawa, Emiyu ; Arai, Tsunenori. / Modified optical coefficient measurements using a single high-NA fiber with detection parameter changes at a tip. Optics in Health Care and Biomedical Optics VIII. editor / Ying Gu ; Qingming Luo ; Xingde Li ; Yuguo Tang ; Dan Zhu. Vol. 10820 SPIE, 2018.
@inproceedings{7d75c4c7da0b4c4f8b6f87d7d6669cff,
title = "Modified optical coefficient measurements using a single high-NA fiber with detection parameter changes at a tip",
abstract = "To avoid the instability of an optical coefficient measurement using sliced tissue preparation, an attenuation coefficient measurement by puncturing an optical fiber in bulk tissue have been reported. We proposed a modified puncturing method to obtain an absorption coefficient and scattering coefficient by increasing optical information. We used the light intensity measurement through a single high-NA fiber puncturing into an optically thick bulk tissue varying detection parameters, the depth and field of view (FOV), at the tip. The light intensity measurement and ray trace calculation using the Monte Carlo method (inverse or normal) were employed. We constructed the measurement system which can change the FOV at the fiber tip inside the bulk tissue using the variable aperture outside the bulk tissue. A 200 μmΦ NA:0.5 fiber installed in a 21G needle was punctured down to surface of the bulk tissue to measure light intensity in the bulk tissue. Using homogeneous optical model solution, the accuracy about attenuation coefficients of the constructed experimental system was confirmed. The error in the attenuation coefficient was up to 1.4{\%}. We demonstrated the optical coefficient measurement of porcine myocardium using the proposed method. To fit dependence of the measured attenuation coefficients on FOV, we decided that the absorption coefficient, the scattering coefficient, and anisotropic parameter were 0.2 mm-1, 10 mm-1, and 0.96, respectively. We proposed modified puncturing optical coefficient measurement varying depth and FOV. We demonstrated its usefulness on myocardium.",
keywords = "bulk tissue, field of view, Inverse Monte Carlo, light intensity measurement, optical coefficients, ray tracing calculation",
author = "Haruna Nakazawa and Marika Doi and Emiyu Ogawa and Tsunenori Arai",
year = "2018",
month = "1",
day = "1",
doi = "10.1117/12.2500742",
language = "English",
volume = "10820",
editor = "Ying Gu and Qingming Luo and Xingde Li and Yuguo Tang and Dan Zhu",
booktitle = "Optics in Health Care and Biomedical Optics VIII",
publisher = "SPIE",

}

TY - GEN

T1 - Modified optical coefficient measurements using a single high-NA fiber with detection parameter changes at a tip

AU - Nakazawa, Haruna

AU - Doi, Marika

AU - Ogawa, Emiyu

AU - Arai, Tsunenori

PY - 2018/1/1

Y1 - 2018/1/1

N2 - To avoid the instability of an optical coefficient measurement using sliced tissue preparation, an attenuation coefficient measurement by puncturing an optical fiber in bulk tissue have been reported. We proposed a modified puncturing method to obtain an absorption coefficient and scattering coefficient by increasing optical information. We used the light intensity measurement through a single high-NA fiber puncturing into an optically thick bulk tissue varying detection parameters, the depth and field of view (FOV), at the tip. The light intensity measurement and ray trace calculation using the Monte Carlo method (inverse or normal) were employed. We constructed the measurement system which can change the FOV at the fiber tip inside the bulk tissue using the variable aperture outside the bulk tissue. A 200 μmΦ NA:0.5 fiber installed in a 21G needle was punctured down to surface of the bulk tissue to measure light intensity in the bulk tissue. Using homogeneous optical model solution, the accuracy about attenuation coefficients of the constructed experimental system was confirmed. The error in the attenuation coefficient was up to 1.4%. We demonstrated the optical coefficient measurement of porcine myocardium using the proposed method. To fit dependence of the measured attenuation coefficients on FOV, we decided that the absorption coefficient, the scattering coefficient, and anisotropic parameter were 0.2 mm-1, 10 mm-1, and 0.96, respectively. We proposed modified puncturing optical coefficient measurement varying depth and FOV. We demonstrated its usefulness on myocardium.

AB - To avoid the instability of an optical coefficient measurement using sliced tissue preparation, an attenuation coefficient measurement by puncturing an optical fiber in bulk tissue have been reported. We proposed a modified puncturing method to obtain an absorption coefficient and scattering coefficient by increasing optical information. We used the light intensity measurement through a single high-NA fiber puncturing into an optically thick bulk tissue varying detection parameters, the depth and field of view (FOV), at the tip. The light intensity measurement and ray trace calculation using the Monte Carlo method (inverse or normal) were employed. We constructed the measurement system which can change the FOV at the fiber tip inside the bulk tissue using the variable aperture outside the bulk tissue. A 200 μmΦ NA:0.5 fiber installed in a 21G needle was punctured down to surface of the bulk tissue to measure light intensity in the bulk tissue. Using homogeneous optical model solution, the accuracy about attenuation coefficients of the constructed experimental system was confirmed. The error in the attenuation coefficient was up to 1.4%. We demonstrated the optical coefficient measurement of porcine myocardium using the proposed method. To fit dependence of the measured attenuation coefficients on FOV, we decided that the absorption coefficient, the scattering coefficient, and anisotropic parameter were 0.2 mm-1, 10 mm-1, and 0.96, respectively. We proposed modified puncturing optical coefficient measurement varying depth and FOV. We demonstrated its usefulness on myocardium.

KW - bulk tissue

KW - field of view

KW - Inverse Monte Carlo

KW - light intensity measurement

KW - optical coefficients

KW - ray tracing calculation

UR - http://www.scopus.com/inward/record.url?scp=85057220345&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85057220345&partnerID=8YFLogxK

U2 - 10.1117/12.2500742

DO - 10.1117/12.2500742

M3 - Conference contribution

AN - SCOPUS:85057220345

VL - 10820

BT - Optics in Health Care and Biomedical Optics VIII

A2 - Gu, Ying

A2 - Luo, Qingming

A2 - Li, Xingde

A2 - Tang, Yuguo

A2 - Zhu, Dan

PB - SPIE

ER -