Numerical simulation of non-linear loading–unloading hysteresis behavior of blood clots

Koichiro Tashiro, Yasuhiro Shobayashi, Atsushi Hotta

Research output: Contribution to journalArticlepeer-review

Abstract

The stress–strain characteristics of a clot during loading/unloading mechanical cycles are significant features to assess the underlying mechanisms of thrombectomy, especially when multiple thrombectomy attempts are required. We investigated a damage model to predict loading/unloading response of clots. To study the validity of the model, we tested theoretical models to reproduce the experimentally obtained mechanical characteristics of clots under various conditions. Three types of clot analogs with different red blood cell (RBC) compositions were prepared. Cylindrical clot analogs were formed for the tensile and compression tests. Loading/unloading tests at 80% of strain were conducted, where the material parameters were determined by fitting the results to a theoretical curve combining the damage model and the elasto-plastic constitutive model. Through the computation for theoretical curves, unique characteristics of clots were revealed such that the hysteresis loss rate did not change by varying RBC contents, except for the clot created with 0% RBC composition, under compressive loading. In addition, the plastic strain decreased as the RBC content decreased under tensile loading, whereas it increased as the RBC content decreased under compressive loading. A three-dimensional finite element method (FEM) was employed with the determined parameters. The FEM could accurately reproduce the experimental stress–strain curves for all types of clot analogs and for both loading types up to a strain of 80%. The results indicate that the theoretical model which incorporates and combines the damage model and the elasto-plastic constitutive model is applicable to predict the non-linear stress–strain behavior of clots under loading and unloading.

Original languageEnglish
Pages (from-to)1205-1217
Number of pages13
JournalBiocybernetics and Biomedical Engineering
Volume42
Issue number4
DOIs
Publication statusPublished - 2022 Oct 1

Keywords

  • Acute ischemic stroke (AIS)
  • Blood clotting
  • Damage model
  • Finite element analysis (FEM)
  • Hysteresis loss
  • Mechanical thrombectomy

ASJC Scopus subject areas

  • Biomedical Engineering

Fingerprint

Dive into the research topics of 'Numerical simulation of non-linear loading–unloading hysteresis behavior of blood clots'. Together they form a unique fingerprint.

Cite this